NIT No 1099 Dated 20.08.2026

NAGAR PANCHAYAT KHARORA, DIST.- RAIPUR (C.G.)

Development and Beautification work of Muktidham at Ward No.- 03.

[CG PWD SOR (B & EM) WITH EFFECT FROM 10.06.2026]

S.N. PARTICULAR QTY. RATE UNIT AMOUNT

A Construction of Boundary wall at Back Part.

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.

3 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

4 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

(SOR Chp- 3.2.1)

5 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

6 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

A Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

7 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A Columns, Pillars, Piers and likes- rectangular or square in shape

(SOR Chp- 2.1.5)

8 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc.

complete as per drawings including cost of binding wire all complete:

Thermo-Mechanically treated bars FE 415

(SOR Chp- 3.12.1)

9 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar1:6(1 cement: 6coarse sand)

(SOR Chp-7.5.4 )

9 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 40 in Superstructure:

Cement Mortar1:6(1 cement: 6coarse sand)

10 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

(SOR Chp-3.1.5 &3.4)

8 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

B For Beams, lintels, cantilevers & walls

(SOR Chp-2.1.8)

12 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

(SOR Chp- 11.2.4)

13 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

(SOR Chp- 11.3.4)

14 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give Protective and water proof finish minimum three coats applied @ 1.43 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C (Glossy/ Semi Glossy finish ) (Product such as Asian Ace, Dulux Pomise exterior, Berger Wall Masta, Nerolac Suraksha Plus, Nippon Shogun Opus, One Style Power Bright.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.)

(SOR Chp- 14.67/Amm) 220.00

B Construction of Toilet in Muktidham

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Extra for every additional lift of 1.5 m or part thereof.

A All types of soils

(SOR Chp- 1.6.1)

3 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.

4 Providing & filling in plinth with sand/ crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

5 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

6 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement :1½ coarse sand :3 graded stone aggregate 20mm

(SOR Chp- 3.2.1)

7 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

8 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar 1:6 (1 cement : 6 coarse sand)

(SOR Chp- 7.5.4)

9 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm)

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

10 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:

Thermo-Mechanically treated bars FE 415

(SOR Chp- 3.12.1)

11 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A Columns, Pillars, Piers and likes- rectangular or square in shape

(SOR Chp- 2.1.5)

B For Beams, lintels, cantilevers & walls

(SOR Chp-2.1.8)

C Weather shade, chhajja, Cornices and mouldings

(SOR Chp-2.1.13)

D Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

(SOR Chp-2.1.7)

12 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including formwork.

13 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 40 in Superstructure:

In Cement Mortar1:6(1 cement :6 fine sand)

14 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level :

Cement Mortar1:4(1cement :4 coarse sand)

(SOR Chp-7.11.2)

15 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

16 Providing & fixing M.S. Grills of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc.including including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

17 Providing and making 12mm thick cement plaster of mix:

In Cement Mortar1:6(1 cement :6 fine sand)

(SOR Chp- 11.2.4)

Net plaster Qty. (After Deduction) 91.57 78.00 per sqm 7142.00

18 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:. In Cement Mortar1:6(1 cement :6 fine sand)

(SOR Chp- 11.3.4)

19 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

(SOR Chp- 12.9.1)

20 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

Size upto 200x300mm

(SOR Chp- 12.7.1)

21 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. (B) 50 mm thick

(SOR Chp- 12.3.2)

22 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give Protective and water proof finish minimum three coats applied @ 1.43 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C (Glossy/ Semi Glossy finish ) (Product such as Asian Ace, Dulux Pomise exterior, Berger Wall Masta, Nerolac Suraksha Plus, Nippon Shogun Opus, One Style Power Bright.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.)

(SOR Chp-14.67/Amm)

In Outer wall 58.58

23 Providing and applying Acrylic washable Distemper or lite economy Plastic Emulsion paint having VOC content less than 50 gram/ lit. minimum two coats up to final finish applied @ 1.1.25 kg / 10 as per relevant I.S. Code 428:2000 (Product such as Tractor Uno, Dulux Duval, Berger Bison, Opus style / Lite Economy emulsion product such as asian Tractor Spark, Dulux pomise sheen, Neroloc Litil Master, Berger Bision Lite, Nippon Superio.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work.

(SOR Chp- 14.62/Amm)

24 Providing and applying Satin/ matt finish Enamel paint minimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relavent IS code 2932: of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthetic Enamel, Opus Prime enamel) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work.

(SOR Chp-14.71/Amm)

25 Add 15% for Sanitory, Water supply and Electrification work 32735.00

C Construction of Cremation Shed in Muktidham

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

3 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm)

(SOR Chp- 3.2.1)

4 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

5 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

6 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Above First Floor Slab

7 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:

Thermo-Mechanically treated bars FE 415

(SOR Chp- 3.12.1)

8 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A Columns, Pillars, Piers and likes- rectangular or square in shape

(SOR Chp- 2.1.5)

B For Beams, lintels, cantilevers & walls

(SOR Chp-2.1.8)

C Weather shade, chhajja, Cornices and mouldings

(SOR Chp-2.1.13)

D Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

(SOR Chp-2.1.7)

9 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar 1:6 (1 cement : 6 coarse sand)

(SOR Chp- 7.5.4)

10 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead

upto 50 M. and lift upto 1.5 M.

11 Providing & filling in plinth with sand/ crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

12 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including formwork.

13 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 40 in Superstructure:

Cement Mortar 1:6(1cement:6 coarse sand)

14 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.

In gratings ,frames, guard bar, ladder, railings, brackets, gates and similar works.

(SOR Chp-9.6.2)

15 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)

(SOR Chp- 11.1.2)

16 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand). .

(SOR Chp- 11.2.4)

17 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: . In Cement Mortar 1:6 (1 cement : 6 fine sand)

(SOR Chp- 11.3.4)

18 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.(B) 50 mm thick

(SOR Chp- 12.3.2)

19 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

(SOR Chp- 3.1.5)

20 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4 kg/ 10 Sqm as per relavent IS code 17545:2021 (Product such as Asian trucare, Berger Happy wall putty, Birla Opus One Pro smooth) to make the surface smooth and even with all tools tackles and Labour etc.complete for work.

(SOR Chp- 14.57/Amm)

21 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give Protective and water proof finish minimum three coats applied @ 1.43 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D, C (Glossy/ Semi Glossy finish ) (Product such as Asian Ace, Dulux Pomise exterior, Berger Wall Masta, Nerolac Suraksha Plus, Nippon Shogun Opus, One Style Power Bright.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty.)

(SOR Chp-14.67/Amm)

21 Providing and applying Acrylic washable Distemper or lite economy Plastic Emulsion paint having VOC content less than 50 gram/ lit. minimum two coats up to final finish applied @ 1.1.25 kg / 10 as per relevant I.S. Code 428:2000 (Product such as Tractor Uno, Dulux Duval, Berger Bison, Opus style / Lite Economy emulsion product such as asian Tractor Spark, Dulux pomise sheen, Neroloc Litil Master, Berger Bision Lite, Nippon Superio.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work.

(SOR Chp-14.62/Amm)

22 Providing and applying Satin/ matt finish Enamel paint minimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relavent IS code 2932: of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthetic Enamel, Opus Prime enamel) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work.

(SOR Chp-14.71/Amm)

D Construction of Chabutara in Muktidham

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

3 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm)

(SOR Chp- 3.2.1)

4 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

5 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

6 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:

Thermo-Mechanically treated bars FE 415

(SOR Chp- 3.12.1)

7 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A Columns, Pillars, Piers and likes- rectangular or square in shape

(SOR Chp- 2.1.5)

B For Beams, lintels, cantilevers & walls

(SOR Chp-2.1.8)

C Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

(SOR Chp-2.1.7)

D Wall of any thickness including attached pilasters, buttresses etc. in super structure.

(SOR Chp-2.1.2)

8 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar1:6(1cement :6 coarse sand)

(SOR Chp- 7.5.4)

9 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 40 in Superstructure:

Cement Mortar 1:6(1cement:6 coarse sand)

10 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead

upto 50 M. and lift upto 1.5 M.

11 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including formwork.

12 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)

(SOR Chp- 11.1.2)

13 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand). .

(SOR Chp- 11.2.4)

14 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)

(SOR Chp- 11.3.4)

15 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.

Granite stone grey/pink

(SOR Chp-13.6.1)

16 15mm thick Granite work (machine cut, table rubbed & mirror polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm).

Granite stone grey/pink

(SOR Chp- 13.4.1)

17 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

All type of soil

(SOR Chp- [1.1.1]

18 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

19 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

(SOR Chp- 3.1.5)

20 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

21 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

Pigment Coloured (rubber mould) precast interlock concrete blocks

( SOR Chp. 12.65.2)

22 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4 kg/ 10 Sqm as per relavent IS code 17545:2021 (Product such as Asian trucare, Berger Happy wall putty, Birla Opus One Pro smooth) to make the surface smooth and even with all tools tackles and Labour etc.complete for work.

(SOR Chp- 14.57/Amm)

23 Providing and applying Acrylic washable Distemper or lite economy Plastic Emulsion paint having VOC content less than 50 gram/ lit. minimum two coats up to final finish applied @ 1.1.25 kg / 10 as per relevant I.S. Code 428:2000 (Product such as Tractor Uno, Dulux Duval, Berger Bison, Opus style / Lite Economy emulsion product such as asian Tractor Spark, Dulux pomise sheen, Neroloc Litil Master, Berger Bision Lite, Nippon Superio.) Inclusive of providing abro tape on edges and article and cleaning of door, windows floor and surface as required with all tools tackles and labour etc. complete for the work.

(SOR Chp-14.62/Amm)

E Internal Development work

Providing & Laying Paver Block

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

(SOR Chp- 3.1.5)

4 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

5 Providing and filling in plinth with sand / crusher dust and hard moorum under floor in layer not exceeding 20 cm in depth consolidation each depending layer by ramming and watering including dressing etc. complete.

SOR Chp- [1.18]

6 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

Pigment Coloured (rubber mould) precast interlock concrete blocks

( SOR Chp. 12.65.2)

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

3 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar1:6(1cement :6 coarse sand)

(SOR Chp- 7.5.4)

4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand).

(SOR Chp- 11.2.4)

5 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm)

(SOR Chp- 3.2.1)

6 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

(SOR Chp-2.1.1)

7 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:

Thermo-Mechanically treated bars FE 415

(SOR Chp- 3.12.1)

8 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.

Granite stone grey/pink

(SOR Chp-13.6.1)

Landscaping Work

1 Excavation for all types & sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

(SOR Chp- 1.1.1)

2 Providing & Laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)

(SOR Chp- 3.1.3)

3 Brick work with modular fly-ash lime bricks (FAL-G Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Cement Mortar1:6(1cement :6 coarse sand)

(SOR Chp- 7.5.4)

4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand).

(SOR Chp- 11.2.4)

5 Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment).

6 Supplying and stacking at site well decayed cow dung manure fromapproved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment).

7 Mixing earth and sludge or manure in proportion specified or directed.

8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).

9 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:

A Hedges like Alife, Dorenta, Tikoma etc

(SOR Chp-22.25.1)

B Furn like Arica, China etc (3 year old)

(SOR Chp-22.25.2)

C Hibiscus (Flower)/ Rose

(SOR Chp-22.25.3)

D Carpet grass (well developed)

(SOR Chp-22.25.4)

Water Supply Pipe line

1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (INTERNAL WORK - EXPOSED ON WALL)

A 25 mm nominal outer dia .Pipes.

(SOR Chp-19.4.3)

B 15 mm nominal outer dia .Pipes.

(SOR Chp-19.4.1)

2 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

25 mm nominal bore

(SOR Chp-19.16.1)

Sub Engineer Nagar Panchayat Kharora Chief Municipal Officer Nagar Panchayat Kharora