Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 CrAccepted-AOC | ₹4.4 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹4.4 Cr+₹2.0 L (0.45%)Rejected-Finance | ₹4.4 Cr+₹2.0 L (0.45%) | L2 | Rejected-Finance L2 |
| 3 | L3₹4.4 Cr+₹4.0 L (0.91%)Rejected-Finance | ₹4.4 Cr+₹4.0 L (0.91%) | L3 | Rejected-Finance L3 |
| 4 | Rejected-Technical | - | - | Rejected-Technical DIS-QUALIFIED |
| 5 | Rejected-Technical | - | - | Rejected-Technical DIS-QUALIFIED |
Tender Value
₹4.5 Cr
EMD Value
₹8.9 L
Closing Date
21 Apr 2026, 5:00 pmClosed
SM_TENDER CELL
GNIDA OFFICE
Providing Conical Arch Street Light Pole on 80 Mtr. wide road between Sector-03 and Sector K.P. -5 and 60 Mtr. Wide road from Chaar Murti Rotary to Tigri Rotary NH-24 Link Road, Gr Noida.
2026_GNIDA_1134057_16
SM/(E-TENDER CELL)/2026/739 DATED-02.04.2026
Open Tender
Electrical Works
Fixed-rate
180 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹6,240
₹8.9 L
15 Jul 2026
7 Apr 2026
23 Apr 2026
7 Apr 2026
21 Apr 2026
7 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | BOQ | - | - | - | - |
| - | Supply and fixing of 7000mm Conical Arch pole made of Continuously tapered circular Hot rolled steel curved sheet (BSEN10025 S355). Total height including with 950 mm long bend radius. The pole should have 154mm Bottom dia, 70mm Top dia x 3mm thick HT Sheet, the base plate have minimum dimension of 250x250x16mm thick steel of grade E-250 to IS 2062:2011 with 4 elongated holes 55x28 to suit M24X750mm bolts with grade 5.6 at PCD250 having MS service door. The base plate have a cable entry hole of 70mm dia at the centre. This mounting steel plate along with foundation bolt of suitable size to be used for ensuring firm grouting into the specially design foundation. Pole section welded by certified Welders using high end MIG welding process. The control gear tray is prewired with 2.5 Sqmm cable, 6 SP MCB and 32 Amp+ B7 Stud type 4 way terminal block for loop/loop out arrangement, 5A 2 Way terminal connector and provision for earthing. The pole should be hot dip galvanized and have PU Painting/Coating of min. thickness 60 to 80 Micron. All dimension are with 5% tolerance. The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options Including nut and bolt, 1:2:4 RCC Foundation, excavation, back filling as per give GA drawing all, t&p material etc complete in all respect as per direction by E/Ι. | - | Nos. | - | - |
| 2Supply and fixing of LED Street light Fitting having die . cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 and above Protection complete in all respect. Cat- AAA UPPWD 2018/SI. NO.1424 | |||||
| 3SITC of Supply and fixing of 9000mm Conical Arch pole made of Continuously tapered circular Hot rolled steel curved pipe (E250 to IS 2062: 2011) 175-185mm Bottom Dia x 76mm Top Dia x 3mm thick with 8984mm Height. Wind speed considered in design 167Km/Hr in compliance with IS 875 Part 3: 1987. The angularly projecting arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from conical pole, facilitates the fitment of street light luminaire at 1604mm from the vertical axis of the pole. Pole section welded by certified welders using high end MIG welding processes. MS service door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A+B7 stud type 4 way terminal block for loop-in/ loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062: 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimensions are within +/- 5% tolerance. After fabrication, entire pole is shot blasted. The pole is coated pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey/Anthracite grey / Black as standard colour options Including nut and bolt, 1:2:4 RCC Foundation, excavation, back filling as per give GA drawing all, t&p material etc complete in all respect as per direction by E/I. | |||||
| 4Supply and fixing of LED Street light Fitting having die . cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66 and above Protection complete in all respect. Cat-AAA UPPWD 2018/SI. NO. 1425 (A) | |||||
| 5Supply and laying of aluminiurn conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc UPPWD 2018/SI. NO.501 | |||||
| - | 4C x 16 sq. mm (i) | - | Mtr | - | - |
| - | 3.5C x 50 sq. mm (L) | - | Mtr | - | - |
| - | 3.5C x 25 sq.mm | - | Mtr | - | - |
| 6Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. UPPWD 2018/SI. NO.503 | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.42 MB
PreQ_Pro_Coni_Stre_Ligh_Pole_Sec_3_KP_Chaar_Murti_NH_24.pdf
Tender Documents • 1.69 MB
BOQ_2116966.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .