Balance work for Const. of Govt. Higher Secondary School at Chanunta (Block B).

Amount

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand).incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Extra for brick works in super structure above plinth level up to floor five level.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens repair to edges plaster panels and finishing the groove complete as per specifications and direction of the Engineer in charge.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand) incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and fixing wood work in frames of doors, windows, clerestory windows & others frames, wrought framed & fixed in position with holdfast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately) salwood.

Providing 40x5 mm flat iron holdfast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts & wooden plugs & embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished of required size with necessary screws (35 mm thick of second class Deodar wood).

Providing & fixing glass panes, with wooden fillets wherever necessary glass panes weighing 13.75 kg/ sqm. (for fixed portion)

Proving & fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm both direction with wire of dia. 0.63mm for doors, windows & clerestory windows with hinges & necessary screws. Second class deodar wood.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply vaneering with vertical grains or cross bands and fsce vaneers on both faces of shutters. 35 mm thick including ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Extra for providing and fixing flush doors with decorative vaneering instead of non- decorative IS marked flush door shutters conforming to IS: 2202 (Part-I) one side only

Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. Including priming coat with approved primer all complete. Fixed to openings / wooden frames with raw / plugs, screws etc.

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100.

10 cm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 1 00 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.

Extra for every additional 1 cm thickness of mud phuska.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand & manufacture of wall surface water thinable cement primer.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing walls with water proofing cement paint of approved brand and manufacture to given an even shade new work (two or more coats applied @ 3.84 Kg/ 10 Sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade(Two or more coats on new work).

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design: In 75x75 mm deep chase.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated & grouted with fine sand including finishing the top smooth. (Crushed).

Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing & fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete. 300x16 mm dia

Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing & fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC-10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper.

Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion 110 mm dia

Providing & fixing on wall face unplasticised- P.V.C moulded fittings/ accessories for unplasticised- Rigid P.V.C rain water pipes conforming to IS: 13592 Type including jointing with seal ring confirming to IS: 5382 living 10 mm gap for thermal expansion. Coupler 110 mm

Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion single Tee with doors 110x110x110 mm

Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion Bend 87.5* 110 mm dia

Providing & fixing white vitreous China pedestal type water closet (Europen Type) with cistern (A/PHAS-100+Cat No. 21054) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with rubber lip/ buffer and side gap filled with silicon sealant wherever required. including brass/ SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of engineer in charge

Providing & fixing of white vitreous china wash basin with pedestal (Hindware Cat No. 1008+ Pedestal Cat No. 11003) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaguar Cat No. 769B+Parko 1535 or approve equivalent), 450 mm long CP Copper connecting pipes (Jaguar Cat No. 803B or Parko 1535 or approved equivelent) wall flanges and rubber adopters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer- in- charge.

Providing & fixing CP single liver extended basin mixer (Height 85 mm) without popup waste system with 450 mm long braided hoses and brass trap with all fittings and accessories as per direction of engineer in charge (Jaguar FUS 29023B)

Providing & fixing white vitreous china flat back urinal with automatic flushing systems (Hindware 60021) comprising of all plumbing, electronic and electrical items, infrared photo cells, eyes, electrically opeated solenoid valve, step down, transformer, equipment and any other item required to provide satisfactory functioning including necessary wall cutting/ chasing and making good, as required for urinal flushing complete as mentioned above as per directions of engineer in charge.

Providing & fixing CP hand spray with lever control (health faucet) (Jaguar Cat No. ALDCHR-565) and flexible hose 1.0 mtr long connection with CP holder for hand spray complete in all respects as per direction of engineer in charge.

Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 a) 15 mm nominal size (Make Jaguar FUS 29053).

Providing & fixing CP brass robe hook (Jaguar Cat No. CAN 1191N) or approved equivalent) fixed with wall/ door with plastic rawl plugs and CP brass screws including cutting and making good the walls wherever required as per direction of engineer in charge.

Providing & fixing of Soap Dish Holder with all fittings as per direction of engineer in charge (Jaguar Cat No. ACN 113N).

providing & fixing 6 mm copper backed float glass mirror MODI/ SAINT- GOBAIN including 6 mm thick BWR type ply wood, 40 mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative etc. All complete as specified and shown in drawing complete to the statisfaction of engineer in charge.

providing & fixing brass towel ring square with round flenge of approved make complete with all fittings (Jaguar Cat No. ACN 11021 BN)

Providing & fixing steel (grade 30) railing made of hollow tube channels, plaster etc. incl. welded, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts & bolts complete. Incl. fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab/Stair with suitable arrangement as per approval of engineer- in- charge.

Providing & fixing toilet holder with all fittings Jaguar Contienal ACN 1153 N.

Providng & fixing 15 mm dia CP brass bib cock with wall flange of approved quality conforming to IS standard (Jaguar Cat NO. 29037)

Providing & fixing of white viterous China under counter oval wash basin/ circular basin (Hindware 10080) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaguar Cat No. 769 B+Parko1535 or approved equivalent), 450 mm long CP copper connections pipes (Jaguar Cat No.803 AB or Parko 1535 or approved equivalent), wall flanges and rubber adopters for waste connection complete including CI/MS brackets duly pointed with paints, cutting and making good the walls/ floors wherever reuired a per directions of engineer in charge.

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (concealed work including cutting chases and making good the wall etc).

1620 (20mm OD) pipe

2532 (32 mm OD) pipe

Providing & fixing Polyetheiene- Aluminium- Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS: 15450-2004 U.V stablised with carbon black having thermal stability for hot and cold water supply, capable to with stand temerature upto 80* C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors, etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge (External work)

1620 (20mm OD) pipe

3240 (40 mm OD) pipe

Providing & fixing multi traps with 63 mm water seal make kitec of equivalent 110 mm inlet 75 mm outlet with 3 inlet option of 40 mm or 50 mm OD

Providing & fixing polypropylene manholes with multiple inlet and single outlet including excavation, fixing etc. complete in all respect upto 1 mtr deep (United make) External works

Manhole 160 mm

Manhole 110 mm

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr. in width) and for shafts , wells, cess pits and the like not exceeding 10 Sqm on Plan , depth up to 1.5 mtr. including disposal of excavated earth, with all leads and lift complete, disposed earth to be levelled & neatly dressed All kinds of soil

Providing at site of works and lowering, laying and jointing HDPE pipes and required specials of outer diameters conforming to IS: 14333-1996 and bearing ISI mark in prepared trenches to required grade and level including cost of jointing materials, chemicals, labour required for handling and making joints etc. including hydraulic testing of pipes, refilling of trenches etc. complete note: - Water for initial testing will be made available free by MIDC if possible. for subsequent fills necessitated on account of rectifications water will be charges at the prevailing industrial water rates in respective industrial area. (Make Supreme)

110 mm dia 6 kg/ cm2

160 mm dia 6 kg/ cm2

Providing and fixing UV stabilized PVC rain water pipes conforming to IS:4985 (working pressure 6 kg/ sqm) incuding jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion (Make Supreme)

75 mm dia 6 kg/ cm2

110 mm dia 6 kg/ cm2

160 mm dia 6 kg/ cm2

Providing & fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expension (Make Supreme)

Single tee with door 160x160x160 mm

Single tee with door 110x110x110 mm

Single tee with door 75x75x75 mm

Bend 75 mm

Door tee 110 mm

Door tee 75 mm

Reducer 110x75 mm

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Providing & fixing heavy class SS grating with cockroach proof SS stramer of approved design including floor trap & setting in floor with cement motor to match with floor finish as per direction of engineer in charge (Size 100 mm dia (ISI marked)

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)

Making soak pit 2.5 m diameter 3.0 m deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 mm and S.W drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with F.P.S bricks.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Providing and fixing ball valve (brass) of approved quality complete

20 mm nominal bore

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Crushed.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing & Laying Reinforced cement concrete work in beams suspended floors, roofs, having slopes up to 15 * landings , balconies , shelves , Chajjas, lintels, bands plain window sills, stair cases & spiral stair cases up to floor five level excluding the cost of centering , shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) crushed. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Centering & shuttering incl. strutting , propping etc. and removal of form work for :-

Retaining walls, return walls, walls (any thickness) including attached plasters, buttresses, plinth and string courses etc.

Suspended floors , roofs, landings, balconies, & access platform.

Edges of slabs and breaks in floor and walls under 20 cm wide.

Steel Reinforcement for RCC work incl. straightening, cutting, bending, placing in position & binding all complete thermo- mechenical treated bars.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'l' hooks, bolts and nuts 8mm dia. G.l plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi andhot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS:12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat

18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement moratr 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement: 4 fine sand).incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Supplying & filling, in plinth with fine sand under floors incl. watering, ramming, consolidating & dressing complete.

Providing & laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded brick agg. 40 mm nominal size). incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and fixing of Steel iron gate as per design approved by the engineer at site complete job (Size 15'-0"x14'-0")

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets,coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing-1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nommal size (Crushed)

Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) crushed. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) crushed. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

M/s JINDAL BUILDERS

ASHOK KUMAR GUPTA

Sukhdev Singh

Harminder Singh

M/S RAM LAL AND SONS