Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.0 L+₹2.7 L (7.76%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹41.4 L+₹6.1 L (17.2%)Rejected-Finance ROOM NO A G E 87 EAST GEETANAGAR NAVY NAGAR COLABA MUMBAI 05 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹41.6 L+₹6.3 L (17.9%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹42.6 L+₹7.3 L (20.5%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
14 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
SPL REP TO INTERLOCKING PATH BLDG 7 FH, 7-F, P-7A, RD APPROACH PATH IN AOR COMPLEX OF AREA SIG COY, ELEVATED PATHWAY FOR OFFRS MESS GUEST ROOM 8, 9, 10 AND PROVN WALL MOUNTING FANS AND AIR CIR FANS FOR BLDG P-1, P-2, P-3 AND P-4
2023_MES_603945_1
8772/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹92,000
Yes
21 Aug 2023
17 Jun 2023
17 Jul 2023
17 Jun 2023
14 Jul 2023
30 Jun 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified & directed .
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil all as specified and directed.
Demolition of cement concrete (unreinforced below or above ground level) any thick and removed from site of work out side of MOD land all as specified and directed
M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.
M&L for READY MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-20 type-1, 1:11/2:3 (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.
M&L rubber moulded glossy finish 60 mm thickness precast cement concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand including providing grass on surface all as specified and directed.
M&L glazed / matt finished chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) laid over 20 mm thick bedding layer in CM (1:6) for fixing tiles all as specified and directed. Make -Somany/Rak/Kajaria or equivalent
M&L rubber moulded glossy finish 60 mm thickness precast grass cement concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator laid over 30 mm thick compacted bed of coarse sand, filling the joints with fine sand including providing grass on surface all as specified and directed.
M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular, 600mm x 600 mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 20 mm thick bedding layer in cement in CM (1:4) for fixing tiles anywhere all as specified and directed. Make -Somany/Rak/Kajaria(Geostone series) or equivalent
S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding all as specified and as directed by Engineer-in-Charge.
M&L coloured, digital glossy/Matt outdoor elevation ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shades of the tiles laid over and including 10 mm thick rendering in CM 1:4 & including dismantling complete all as specified and directed by Engineer-in-Charge. Make - Orient bell /Johnson/ Kajaria or equivalent
M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping, bed concrete and all other similar works including necessary formwork all as specified and as directed.
M&L in repairs brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 including demolition of existing wall all as specified & as directed.
Taking down cement plaster of any description on brick or stone walls, Chajjas etc. including raking out joints, hacking for key, scrubbing down with water etc. including removing rubbish to a distance exceeding 100m all as specified and as directed.
M&L for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for preparing new plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent and scaffolding where ever required at any height for external painting all as specifed and directed.
S&F in repairs fancy design 4 LED outdoor wall lamp 12 watt up and down light having minimum weight of 0.60 Kg, rectugular shape with conncealed wiring with wire having adequates number of connectors and one power supply kit as per manufacture requirement and all as specified and as directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources.
S&F in repairs pile height 35 mm thick ,density 18900/stitch /m2 colour fruit green with backing double PP net with PU coating fixing mapai ultrabond turf PU 2K artificial grass glue adhesive fixing complete all as specified & directed .
S&F of fancy design SS garde 304 street LED bollard having minimum weight of 11.30 Kg, diameter of 100mm, length of 1.00m at top and bottom diameter of 180mm using 100 mm polycarbonate glass milky white with 12 watts LED module light of philips/fulham driver having adequate number of connectors and one power supply kit as per manufacture requirement and provide bothside hook for fixing chain link necessary provision for fixing on road all as specified and as directed. Note- Item includes connection to main electric supply from near by electric sources.
S&F cross section dia of 10mm stainless steel 316 grade medium link chain between bollards, having outside width of 38mm, inside length (pitch) 41mm, well polished fiixing complete all as specified and directed.
M&L for prepration of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at the rate of 10 kg per 10 sqm all as specified and as directed.
M&L for prepration of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at the rate of 5 kg per 10 sqm all as specified and as directed.
M&L for laying bituminous with plastic premix semidense asphaltic premixed cocrete 40 mm thick (consolidated thickness) with 6 % binder content by weight of which 92% to be of bitumen of VG -30 grade and 8 % to be of waste plastic used should be of only low density polythylene (LDPE) or high density polythylene (HDPE) and not to be heated more then 180 degree centrigrade while mixing of waste plastic should be done using dry mixing process as per para 6.1 of IRC :SP :98-2013 (available on open media) .The waste plastic will not be provided by the department and the contractor is directed to refer IRC: SP :98-2013 and IRC :III -2009 before quoating the rates complete all as specified and directed.
M&L for premixed bituminous, macadam laid over primed surface of road using paving bitumen any penetration, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) . Binder contents of premixed macadam shall be 4% by weight of total mix complete all as specified in SSR and as directed.
Supply and fixing in repairs convex mirror of 800 mm dia size made of one piece polycarbonate plastic, outdoor type, mounted on steel frame complete including all fixing arrangments all as shown in sketch and as directed.
S&F in repairs LED powered solar road studs of size not less than 110 mm X 110 mm X 25 mm ( with shank height not less than 50mm) made of weather resistance aluminium alloy and poly carbonate material electronically welded micro- prismatic lens with abrasion resistant coating. Protection shall conform to IP65 in accordance with IS: 12063-1987 Category 2 for protection against water ingress. Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt. One Ni-Mh or NI-cd Rechargeable Battery (1.2V / 1600 MA). The cats eye shall support a load of approx 10 TON weight. The slope of retro- reflective surface shall be 35 ± 5 degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The stud shall provide a viewing distance of not less than 800m. The studs shall be flushed onto the to the Road surface and fixed using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
S&F metal delineator 1100 mm long X 100 mm x20mm MS Rectangular (medium grade) powder coated and pasted with twin colour reflective tape strips embedded 200 mm below ground level (approx 2-3 Kg weight) including excavation and PCC M-15 (Nominal Mix) with using 20 mm graded crushed stone aggregate in foundation of size 200 mm X 200 mm X 200 mm and making good surface complete as per direction of Engineer-in-charge. Make: 3M or equivalent make as approved by GE.
S&F in repairs for cat eye plastic body having two ways reflector with abrasion resistant lens including fixing arrengement as per manufactures instructions all as specified and dircted. Cat part No DA 971P Make:- Dark eye /3M
S&F in repairs of speed bumps breakers made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout all as specified and directed. Make -DA -1008 Dark Eye /3M
S&F in repairs rumbler strips made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 100mm and 15mm with aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout all as specified and directed. Make -DA -1008 Dark Eye /3M
M&L for applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, 20% glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make -(a) LUXOL(Berger)
M&L for providing precast cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:4 in road side kerb stones of any shape & size and all other similar works all as specified and directed.
M&L for preperation of new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and patteren all as specified and directed .
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified and directed.
M&L in repairs point wiring, concealed type including rigid non-metallic PVC heavy duty conduite of 20/25 mm dia size, cutting chases for sinking for concealed boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc. white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch, making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Ex Fan / wall fan controlled by one switch 1 way 6/10 amps 1 module.
All as per serial No.39 here-in before but for One 3 pin socket point 5 Amps on independent board.
S&F Switch piano, flush type single pole, one way 5 Amp
S&F in repairs switch socket combination 2/3 pin 5 Amp, flush type
S&F wall mounted fan 400 mm sweep, air delivery 100 cmm, 2100 Rpm, 230 volt AC, 50 Hz, 100 Watt all as specified and directed. Make: BAJAJ Neo-Spectrum equivalent make of Havells/Crompton Greaves.
S&F pedastal fan 450 mm sweep, air delivery 125 cmm, 1440 Rpm, 230 volt AC, 50 Hz, 100 watt all as specified and directed. Make: Bajaj Supreme plus ASIN B07P5HWDRK or equivalent make of Havells/ Crompton Greaves.
ASHOK CONSTRUCTION
David Construction Co.
Unitech Enterprises
SHREE JAGDISH FURNITURE CO.
SAHI SAGAR ENTERPRISES
Nilesh Construction
Bidder Name
Unitech Enterprises
Frends Enterprises
Nilesh Construction
ASHOK CONSTRUCTION
David Construction Co.
SHREE JAGDISH FURNITURE CO.
SAHI SAGAR ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .