Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-Finance | L1 | Accepted-Finance Low | |
| 2 | L2₹36.8 L+₹2.4 L (7.00%)Accepted-Finance | L2 | Accepted-Finance High |
Tender Value
₹35 L
EMD Value
₹35,000
Closing Date
5 Feb 2024, 3:00 pmClosed
BDO BP
KNR union
Construction of Pathway and Gym Building in Samayapuram Park at Irandankattalai Panchayat
2024_RDTN_415038_1
KNR 5 / 4169 / 2023 / A3 /Dated 28.01.2024
Open Tender
Civil Works - Others
Works
150 days
Irandankatllai
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹35,000
Yes
5 Feb 2024
30 Jan 2024
5 Feb 2024
30 Jan 2024
5 Feb 2024
30 Jan 2024
Amount
Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed In hard stiff clay, stiff blackcotton soil, hard red earth, shale murams, gravel stony earth and earth muds with 50%(fifty percent) fair size boulders and hard gravely soils(SS20B)
Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete
Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete
Supply and Erecting Centring in sides of Pavement Sides including cost & Conveyance of all materials & all labour charges , etc
Plain Cement Concrete in CC 1:1.5:3 mix using 20mm IS Metal in Pavement Sides including cost & Conveyance of all materials & all labour charges , etc
Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.
Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 80mm and compacted over a thin bedding M.Sand layer of 30 mm thickness and joints shall be filled by fine M.Sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)
Swing 2 Seats:Swing Top pipe and supporting pipe made of Corrugated steel pipes ,seats made of FRP materials 18 inch X 12 inch size and Heavy Duty stainless steel chain,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.
Seesaw 2 Board:Seesaw Top pipe and supporting pipe made of steel pipes ,See saw pipe length 7 ft ,seats made of FRP material with safety hand grip to play 4 children simultaneously,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.
SLIDER made of GI sheet and ladders made of 1 inch pipe and 1/2 inch cross steps - Slide and Ladder centrally supported by 1-1/4 inch pipe ,paint of all weather two coats using Enamel paint including cost and conveyance of all materials,labour charges etc.
Bridge Ladder:Vertical and horizontal GI pipes of bridge ladder made of 1 inch and cross bars of ladder made of 1/4 inch. Height 5 1/2 ft,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.
Graded Horizontal bar:Height — The bar shall be made in two heights of 1.6 and 2 m above ground leveL,The maximum length of horizontal bar shall be 22 m. The bar shall be of steel having a diameter of 28 mm.Uprights — The uprights shall be of steel tubes 60.3 mm outside diameter having a thickness of 65mm,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.
Supply and fixing of streel light alround the park including cost and conveyance of post ,labour charges etc
Provision for Stainless Steel sitting bench of minimum capacity of 3 persons including all labour charges etc
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.
Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete
Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. Upto Base
RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. Above Base
Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Upto Base
Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Above Base
Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.
Fabrication, Supply and erection of Steel Structures as per the specification, dimensions and design requirement including all labour charges and other charges etc. complete (including Primary and Secondary framing, foundation bolts, Stiffener plate, Cleat plate, fasteners, cold formed Purlin members, MS angle, Rectangular Hollow sections, Sag rods, Bracing rods, End plate, Base plate, Connection plate etc using welding)
Supplying and fixing colour coated galvanised sheet for roofing including all labour charges for fixing neccesary bolt, nuts, screws, "J" or "U" bolts etc,
Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete
PCC 1:4:8 mix using 40mm ISS HBG metal including all other labour charges etc complete
Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Providing tubular section of size 80mmx40mmx2.9mm hollow pipe of 4" spacing with proper welding and necssary vertical posts of standard size with cost and coneyance including all other labour charges etc complete
Provision for Steel door of size 1.80m x 2.10m including labour charges for fixing,etc
Leg Press: Supply ,Erection, and fixing of leg press of size 2030mm x 340mmx 1535mm,Area of 7.4 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.
Air walker/Leg & Thigh Exerciser : Supply ,Erection, and fixing of Airwalker of size 1122mm x 510mmx 1489mm,Area of 5.3 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.
Shoulder Builder: Shoulder builder equipped with 1. vertical post of dia inch, height 5 ft 2. Rotating/Spinning wheels (2 Nos) of dia 3 ft made of 1 inch pipe along with interior cross bars (2 nos) of 1 inch pipe with necessary provisions for handle to spin the wheel,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.
Hip Twister: Hip Twister equipped with 1. Vertical square channel post of size 70mmx70mmx6mm 2. Horizontal post (top and bottom) using square channel of size 50mmx50mmx6mm 3. Pedal (2 Nos) of dia 1 ft 6 inch made of checkered plate of 6mm thick with minimum ground clearance of 0.5 ft, and also necessary bearing to spin and necessary provision such as 1 inch handle to provide support,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.
Exercise cycle: Equipped with single window, LCD Display showing speed, Time, distance & Calories. Resistance Range with Cotton Belt capacity for user maximum Wt of 200 lbs. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
Weight lifting rods with plates: Weight Lifting rods of various sizes of 4ft, 5ft & 6ft and weight lifting chromium coated steel plates of various weights of 2.50Kg.5.00Kg,7.50Kg, 10.00Kg,15.00Kg and 20.00Kg on both sides. With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
Dumbbell with stand: Three tier dumbbell stand along with rods, plates and dumbbells made up with steel rubber coated 2, 3,5 & 10 kgs. With onsite comprehensive annual maintenance 3 years after expiry of guarantee/ warranty period.
6 Station Multi Gym: Multi Function Gym 6 station Equipped with 1. Butterfly 2. Leg Extn 3. Upright Multi bench press 4. Lat pull down with 1" dia CRC Steel Stoving painted 4ft. Length 5. Rear Deltoid 6. vertical knee raise. After assembling, the size approximately L 135 x W 119 x H 196 cm varying permissible upto 10pct. with "D" shape metal steel tube heavy duty frame, enameled finish with 150 lbs plastic system PVC seat/back foam protector. All frames minimum of 14 gauge with 2 inch dia CRPC Steel, stoving painted. With 1 inch pipe of 14 gauge 25.4mm with onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ Warranty period.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
Orbitrek Trainer:
Abdominal conditioner: All steel powder coated frame ,Rexin covered cushioned top.With onsite comprehensive annual maintenance for 3 years after expiry of guarantee/ warranty period.
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
E.SEKAR
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_493805.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .