SPL REPAIRS TO SP ROAD FROM MG ROAD TO MAJ L J SINGH SQUARE AND INCLUDING PATH ROAD FURNITURE AND SPL REPAIRS TO INTERNAL ROADS OF OFFRS MESS AMC CC AND SPL REPAIRS TO INTERNAL ROADS OF AMC RECORDS (OFFICE COMPLEX AND PERS LINES ) UNDER GE (EAST) LUC

Amount

M & L for repairs to pot holes of any depth n.exc 1 Sqm each incl sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting round edges to at least 25mm in depth and making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 Grade at 10 Kg/10 Sqm complete all as specified and directed.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm using paving bitumen VG 30 grade including rolling complete all as specified.

Scarifying or picking gravelled macadam or bituminous macadam surfaces area n. exc 400 sqm and depth exc 50 mm but n exc.100 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm & depth exc 50mm but n.exc 100mm deep and removal from site to a distance n.exc 50m complete all specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sqm complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed.

M&L Bituminous premix asphaltic semi dense concrete with 5.50% binder content by weight of total mix paving bitumen VG 30 grade, poured in the forms of requisite height shape and width for rumble trip/speed breaker after lifting of forms surface finished to required shape and well compated complete all as specified and directed by Engr-in-Charge

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and Labour for PCC type D-2 (1:3:6) (40mm graded aggregate) as in foundation complete all as specified and directed.

Dismantling of stone slabs and tiles/paver block laid in dry of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 80mm thick pressed precast concrete interlocking paver block reflective type, rubber moulded coloured of M-40mm grade as in floors complete all as specified and directed.

Ditto but excet paver block.

M & L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L 100 mm thick cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; all as specified

Providing precast cement concrete type C1 1:3:6 ( 20 mm aaggregate ) as in copings. kneelers, apex stones

Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 all complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm stone aggregate as in foundation filling complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls

M&L for two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces all as specified and directed.

Demolition of cement concrete (unreinforced) in any position n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

S & F for in repair road delinator made out of M.S pipe having 75mm outer dia, thickness 1.4mm and 1200mm length, duly powder coated in black/white colour and to be embedded in PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) with 3 nos x75mm high intensity prismatic (HIP) reflective tapes and MS pipe having powder coated jali & mesh for reflector portion & for anti theft.Below the reflective band of red/yellow/white colour high intensity micro prismatic type - IV tape (As per IRC 67/2010) of 75 mm each shall be provided complete all as specified and directed. Note: Necessary excavation for embedding of M S delinator shall be deemed to be included in the rate quoted against this item.

Supply and fixing with stainless steel frame including necessary clamps etc. retro-reflective, Double Sided, Road Name, Signboards comprising of 4mm thick aluminum composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center ensuring that no riveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflective sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. (Note:- Stainless steel frame shall be measured and paid saperatly)

Supply and fixing 50mm dia and 1.80mm thickness of stainless steel pipe for framing of sign board including cutting, welding and framing of stainless steel stucture complete all as specified and directed.

S&F Outdoor road traffic Convex Mirror 800mm Dia Polycarbonate Unbreakable Round Wide Angle Driveway Mirror, with Adjutable Brackets & Nuts Bolts with 50mm dia tubular Post of Length 3 Mtr for Hanging Mirror and including necessary PCC Eexcavation for fixing the post complete all as specified and directed.

S & F 125mmx125mmx25mm (Shank 60mm) solar powered blinking led light driveway Roads studs of aluminium alloy made of high efficiency mono crystelline solar panel (2.4V/0.3Watt) with 3 LED's each side, the solar studs have automatic switching on & off system under dark weather and bright condition & each unit should be completely independent composite unit. The studs made by robust all weather aluminium die cast housing with LEDs on each side and colour of LEDs as approved complete all as specified and directed.

Supply and fixing in repair speed berms made of heavy duty tough rubber of size 350mmx250mmx53mm and weight 1.2 kg approx coloured black and yellow complete all as specified and directed.

M&L 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; all as specified

M&L PPC tiles coloured rubber moulded Paver block any shape and size conforming to IS 15658-2006 of 60mm thickness,M-35 grade in set jointed and pointed with grey cement slurry and pigment to match the floor approved design /colour set and bedded over and including 25mm thick coarse sand laid over compacted sub soil all as specified and directed.

Taking down existing finish completely including washing down and applying two coats of apex paint weather proof exterior grade emulsion paint over a coat of primer on plastered surfaces / concrete surface / kerb stone including preparation of surfaces complete over 10cm girth or width complete all as specified and directed.

Matrubhoomi Construction (BID ID -3242079)

M/s Ram Singh Agarwal (BID ID -3242067)