Repair/ maint of DG sets, voltage stabilisers, washing machine, air compressor, security/street light and repair/maint of sewage installation/pump house and allied items at AGE Aurangabad under GE (S) Ahmednagar

Amount

Dismantling from site and transporting to authorised workshowp 30 KVA double cylinder DG set engine for complete overhauling drilling the bore, replacement of piston head, piston rod, piston rings, head gasket, piston bearing, tapit valve and covers, pressure oil pipes, fuel pump, machining of crank shalft at lathe machine replacement of fuel filter and oil filter complete with 'O' rings, dry air filter, air Inlet and exhaust outlet manifolds and refixing the same after repair and cleaning with diesel and removing all dirt/oil deposted on body of engine and testing commission complete all as directed.

Half yearly Inspection, maintenance and servicing of DG set any Make and any type including alternator, Electric panel board, Connection from DG set etc by thorough check (B check) along with routine A check for smooth functioning and carrying out complete maint as per OEM instructions complete all as specified and directed. (a) Replace lubricant oil. (b) Replacing lubricating oil filter element with sealing 'O’ ring. (c) Replacing fuel filter element (Pre + Micro) with sealing 'O’ ring. (d) Replacing coolant. (e) Replacing Governor oil. Note :- Spares, Oil, Lubricants, Coolant etc will be measured & paid under relevant item.

Fuel filter element pre+micro with 'O' ring for DG set 100 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Fuel filter element pre+micro with 'O' ring for DG set 40 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Fuel filter element pre+micro with 'O' ring for DG set 30 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Oil filer element with 'O' ring for DG set 100 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Oil filer element with 'O' ring for DG set 40 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Oil filer element with 'O' ring for DG set 30 KVA of Make Kirloskar or as per existing make at site, fixed complete all as directed.

Engine oil 10W30 of Make: Shell /Servo filled complete all as directed.

Coolent of Make: Indian oil / TVS, filled complete all as directed.

Taking out oud unserviceable oil fired incinator pump and transporting to auth workshop of Denfoss for repairing and repalcement of unserviceable parts such as firing nozzle, controle valve, relay and communication wires, controle switch , serving/replacement of fuel pump , cleaning of diesel tank and fuel pipes and refixing the same in position and testing commisioning at site all as directed.

Repairing of oil fired incinator chimney 20 mtr high and refixing the lightening arrestor, air termination rod and aluminium strip on saddle/wooden gutties and connecting upto the earthing pit complete all as directed by Engr-in-Charge at site. Note :- Work shall be carried out at a height of 20 mtr and rate quoted shall be deemed to be included for any expediture for provn of crane etc.

Wall mounting type pre wired DOL starter suitable for 1.5 HP motor with overload protection and suitable relay and making connection complete all as specified and directed. Make: L&T/Havells/Siemens

Servicing of washing machine of capacity 45kg/hr of Make -Shine and carry out testing after repair/replacement of following spares (if required) :- (Note :- Servicing/repair will be carried out by Service Engineer of company and any charges on account of his visit will be paid by the contractor)

Heating element of 10 KW suitable for washing machine of capacity 45kg/hr,fixed in replacement complete all as directed. Make -Shine or equivalent as required

Timer switch with rotating motor suitable for washing machine of cap 45kg/hr,fixed in replacement complete all as directed. Make -Shine or equivalent as required.

Relay for washing machine of cap 45kg/hr,fixed in replacement complete all as directed. Make as per existing at site.

Repair/Replacement of rotor motor of any cap/any parts of door cover of washing machine complete all as directed.

Repair/Replacement of drier motor of cap 0.5 HP 2800 rpm including break shoe/wash out valve suitable for washing machine of cap 45kg/hr, fixed in replacement complete all as directed.Make -Shine

MCB TPN 63A, 415 volts fixed in replacement complete all as directed. Make Havells/Legrand/Scnieder

Taking out old unserviceable submersible sewage pump set from sewage underground sump by means of chain pully and trasporting to authorised workshop for repair and rewinding the motor with super enamelled insulated copper wire of existing gauge including insulated packing liquid compound, differential oil-4.5 ltrs, repalcement of oil seal and motor/pump bearing, replacement/repair of motor and pump shaft made out of high quality Stainless steel and reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running for the 30HP, 3 phase electric motor all as specified & directed.

Disconnect the electric supply, dismantle coupling and remove 7.5 HP compressor, shifting to local workshop for repair / servicing, Opening up the compressor unit, dismantle and remove damaged piston, piston connecting rod, rings etc and replace with new one, Reconditioning / welding / filling / grinding / lathework to shaft of the compressor unit, supply & replace suitable size bearing of make : SKF - 2Nos, Drain out the out dated compressor oil, cleaning the oil chamber thoroughly by removing the sludges from the oil sump, replace with new compressor oil of specified gravity - 4 Litres, Supply & replace air filters of suitable size - 2Nos, Reassemling with new gasket set, Transporting back to the original location, coupling, aligning, Supply and replace worn out V - belts ( B-72) of make : Fenner - 3Nos, and reinstalling at sie, connecting, testing & commissioning complete all as specified & directed.

Disconnecting, taking out and transporting to workshop old UNSV pump of capacity 40 HP for repair/replacement of worn out parts & reassembling after satisfactory completion of repair work (the repair work shall includes replacement of both end pump bearings, glang packing, oil seal, including machining of shaft at lathe machine, greasing complete) transporting back to site of work, reconnecting and testing for smooth running at pump house complete all as specified and directed. Note - Any nut/bolts/ studs and packing required shall deemed to be included in the rates quoted by the contractor.

Disconnecting, taking out and transporting to workshop old UNSV pump of capacity 25 HP for repair/replacement of worn out parts & reassembling after satisfactory completion of repair work (the repair work shall includes replacement of both end pump bearings, glang packing, oil seal, including machining of shaft at lathe machine, greasing complete) transporting back to site of work, reconnecting and testing for smooth running at pump house complete all as specified and directed. Note - Any nut/bolts/ studs and packing required shall deemed to be included in the rates quoted by the contractor.

Disconnecting, taking out and transporting to workshop old UNSV pump of capacity 15 HP for repair/replacement of worn out parts & reassembling after satisfactory completion of repair work (the repair work shall includes replacement of both end pump bearings, glang packing, oil seal, including machining of shaft at lathe machine, greasing complete) transporting back to site of work, reconnecting and testing for smooth running at pump house complete all as specified and directed. Note - Any nut/bolts/ studs and packing required shall deemed to be included in the rates quoted by the contractor.

Taking down old unserviceable street light/metal hallied fittings from street light poles of any type/gun shed for repairs and refixing including testing the same in existing position after repair complete all as directed.(Note- items as required for repairs and replacement shall be measured and paid for separately under respective items of Schedule A).

LED type street light fitting of 60 watts ,IP66 ,5700 Kwith die cast aluminium body and with electronic driver at various locations with fixing accessories ie 40 mm GI pipe light grade 1.2 mtr bracket duly bent to shape & GI clamp of suitable size for fixing of LED fitting including taking down old unserviceable street fitting from poles complete all as specified & directed. Make of LED light fitting :Havells cat part No LHETBXU7PA6J060 or equivalent in Bajaj/Phillips.

Electronic ignitor suitable for 70 to 400 watt HPSV/HPMV street light fittings fix in repacement complete all as specified and directed.Make - Bajaj / phillips/Havells/Surya or equivalent approved.

Ballast, heavy duty, Copper wound, SP 230 Volts, 50 Hz suitable for HPSV/MH 250 Watt fix in repacement complete all as specified and directed. Make Havells of CP No LHBW20125036 or equivalent in make CG/Wipro/Bajaj.

Ballast, heavy duty, Copper wound, SP 230 Volts, 50 Hz suitable for HPSV/MH 150 Watt fix in repacement complete all as specified and directed. Make Havells of CP No LHBW20125036 or equivalent in make CG/Wipro/Bajaj.

High Pressure Sodium Vapour lamp/metal halide lamp, tubular type of capacity 250 watt, fix in repacement complete all as specified and directed. Make - CG, Havells, Wipro

High Pressure Sodium Vapour lamp/metal halide lamp, tubular type of capacity 150 watt, fix in repacement complete all as specified and directed. Make - CG, Havells, Wipro

Capacitor of size 10/20 mfd 220 Volt, fix in repacement complete all as specified and directed.

Capacitor of size 33 mfd 220 Volt, fix in repacement complete all as specified and directed.

Capacitor of size 42 mfd 220 Volt, fix in repacement complete all as specified and directed.

Bracket for street light made out of GI pipe medium grade of suitable size (40 mm dia and 1.2 mtr long) bent to shape fixed with and including necessary heavy duty clamps of suitable size including painting the clamps with two coats of synthetic enamel paint over a coat of primer fix in repacement complete all as specified and directed.

LED type street light fitting of 45 watts ,IP66 , 5700 K with die cast aluminium body including taking down old unserviceable street fitting from poles complete all as specified & directed. Make of LED light fitting :Havells cat part No LHETAXU7PN6J045 or equivalent in Bajaj/Phillips.

Astronomical street light timer switch electronic type with digital display suitable Indian region longitude/latitude with 24 Houres operation settings including single phase contactor suitable for 10 KW complete with all accessories and prewired suitable for and including panel/pole mouting box made out of 3mm thick CRCA sheet apoxy painted and powder coating single door outdoor type with mounting arrangements fixed in replacement complete all as directed. Make-Legrand/Havells/L&T.

1100 volts grade heavy duty multi stranded aluminium conductor cable PVC insulated served with inner sheathing of PVC tape and overall PVC sheathed in service connection flat/circular cable of sizes 4 Sqmm 2 core laid and jointed in position fix in repacement complete all as specified and directed. Make: Havells/Polycab/Plaza

1100 volts grade heavy duty multi stranded aluminium conductor cable PVC insulated served with inner sheathing of PVC tape and overall PVC sheathed in service connection flat/circular cable of sizes 6 Sqmm 2 core laid and jointed in position fix in repacement complete all as specified and directed. Make: Hhavells/Polycab/Plaza

Disconnecting electric and water supply connection of centrifugal pump of any capacity for repair such as cleaning, servicing, repair of leakage/UNSV parts any type and reconnecting all electric and water supply connections and testing complete all as directed.

Thorough checking and servicing of pressure sand filter and pressure activated carbon filter complete all as directed.

Checking and servicing of Fab -I and Fab - II outgoing pipe net and to stop flow of filter media from fabrication tank to tube settler tank complete all as directed.

Checking wash out sludge sump, tube settler tank and necessary connected works for proper working system complete all as directed.

Taking down sludge motor from existing location to workshop for winding and servicing of sludge pump and after repair testing and fixing the motor at the existing location and connect to sludge line after checking of servicibility, checking of Valve, any type leakage and servicing of centrifuge machine all as specified and directed.

Repair/servicing of pressure pump any type and capacity complete all as directed.

SONU ENTERPRISES

Pritam Electro Mechanical Services