REPAIR AND MAINTENANCE TO FLOOR ROOF PLUMBING ROLLING SHUTTER JOINERY ALONGWITH ASSOCIATED BR WORKS UNDER AGE BR AT HEMRL PASHAN

Amount

Dismantling slabs and tiles of any description or thickness in floors, apprors etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed

Material and labour for 450mm x 300mm x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. Make :- Johnson, Orient, Asian, Kajaria

Material and labour for Non- skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in cement mortar 1:6 complete all as specified and directed. Make :- Johnson, Orient, Asian, Kajaria

Material and labour for Double charged vitrified ceramic light shade tiles 10mm thick (square/Rectangular) polished, area of each tiles exceeding 0.18 sqm but not exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including and over 15mm thick screed bed cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:4:8, type D2 (Using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 25mm thick cement concrete 1:2:4, type B0 in flooring (using 12.5 mm graded crushed stone aggregate) finished even and fair complete all as specified and directed.

Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade over and including 50mm thick sand cushioning complete all as specified and directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in flooring complete all as specified and directed

Material and labour for Granite slab 20mm thick machine cut,in cooking platform laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types as in urinal partition etc complete all as specified and directed by Engr- in-Charge.

Material and labour for rounding to edges of Granite slab 20 mm thickness on one edge, such as in , cills, cooking platform,etc and other similar situations complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18mm to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for factory made precast chequered cement concrete tiles, size 30cm x 30cm x 22mm to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in cement mortar (1:6) , complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Material and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter , fixed with self tapping screwscomplete all as specified and directed.

Fixing only Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter , fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Taking down rolling shutter any type including top covers complete of sizes of Shutter area upto 15 Sqm complete all as specified and directed.

Taking down steel collapsible gate of any type and Area of gate n.exc 10 Sqm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 290 Gde E-165 Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including errection and fabrication also fastening and fixing complete all as specified and directed.

Supply and fix Steel rolling shutters, Thickness of laths 1. mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply and fix collapsible steel gates top hung consisting of channel pickets, pivoted flat bars top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Taking down rolling shutter any type including hood covers, top covers for carrying out repairs/ replacement of worn out parts such as brackets, guide, shaft, pulleys, gear wheels, gear boxes and straightning partition, side patti, press button, rails, tightening end clips, cleaning and greasing the parts in good condition and refixing for Shutter area upto 15 Sqm complete all as specified and directed. Note :- Spares replaced will be measured and paid separately as "Supply only".

Supply only the following items As per existing ( to be replaced against Ser Item No 28 here -in- before) complete all as specified and directed. (a) Heavy duty spring n.exc 45 cm long.

(b) Gear box set.

(c) Gear wheel (steel/CI).

(d) Gear worm.

(e) Shaft wheel with bearing.

(f) Gear box handle.

(g) Press button rail unit.

(h) Side guide (12 guage).

(i) End clips.

(j) Safety lever lock mild steel.

(k) Partition patties 75 mm wide (mild steel strip).

(l) Heavy duty shaft pipe mild steel of 40 mm dia.

(m) -Ditto- all as per Sl item No.4(l) above but 50mm dia.

(n) Top Cover (18 gauge).

(o) Mild steel flat 18mm x 5mm.

Supply and fix in repair projecting type hinges / steel handle/ and steel peg stay/ brackets for steel windows fixed with screw bolts or with welding complete all as specified and directed.

Supply and fix in repair any type hinges / steel handle for steel door fixed with screw bolts or with welding complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:3:6, type C-1 using 20mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

Material and labour for cement concrete 1:2:4, type B -1 (using 20mm graded crushed stone aggregate) 100 mm thick as in hardstanding complete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with and including pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of slab 100mm complete all as specified and directed.

Taking down chowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down existing chowkats or frames (without taking of shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm.complete all as specified and directed.

Supply and fix powder coated aluminium Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ metre including necessary joining cleats,glazing clips, floor door spring, ruber neoprene packing,handles 2 Nos in each door, hinges, suitable handle anodised aluminum snap beading screws etc complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.

Material and labour for pressed steel frame for doors size 105mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6, type C1 (using 20mm graded crushed stone aggregate) for filling in pressed steel frames and other similar items etc complete all as specified and directed.

Supply and fix Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701mm to 850 mm in width and of weight between 36kg to 60 kg and fixed complete all as specified and directed.

Material and labour for Aluminium Powder coating section for door frames & hutters/partition etc including joining cleat, mullion, grills etc. sliding /openable type complete of standard sections all as specified and as directed by Engr-in charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco).

Material and labour for repairing aluminium door by taking out frame alongwith shutter, fixing missing screw to wall, adjusting floor spring, repairing hook joints of frame , Hinges,tower bolts,handles and re-erecting in good working condition by necessary lubrication complete all as specified and directed by Engineer-in-Charge.

Taking down and refixing in same position Shutters of any description exceeding 1 sqm but not exceeding 2sqm each, including easing and repair works , complete all as specified and directed.

Dismantling of old MS hinges of any type from steel windows/ventilators and Supply and fix new MS box type hinges in same or new position complete all as specified and directed.

Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed

Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for 2nd class hardwood, Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.complete all as specified and directed.

Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (II class hard wood) complete all as specified and directed

Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply and fix 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

Material and labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed

Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size complete all as specified and directed

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply and fix in repairs mortise lock, brass, 4 lever vertical type 100mm size complete all as specified and directed. Make: GODREJ/ HARRISON/ LINK

Taking down chowkhats / frame incl shutterrs or Steel windows / ventilators incl shutterrs (without taking off shutters from the frame) any type and size complete all as specified and directed.

Material and labour for aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Material and labour for rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square complete all as specified and directed.

Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250 metre and not exc 500 metre out of MoD land complete all as specified and directed. Note: i) The rates are inclusive of removal for any type old water proofing treatment over Main RCC slab. ii) All the dismantled debris are required to be removed from HEMRL premises right after demolition so that process of user should not get obstructed.

Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coping roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in benching,coping,kerbs and the likes including weathering slightly rounded or chamfered angles and throating as directed including necessary use and waste of form work complete all as specified and directed.

Material and labour for rendering of 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer's instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed. (Liquid water proofing compound shall be measured and paid seperately as 'Supply only'.)

Supply and fix 3mm thick APP pre-fabricated membrane with and including non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall not be less than 3.0 Kg / Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed. Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. (iii) Rates are inclusive of cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm Complete all as specified and directed. Make :- Super Thermolay APP PL of STP Ltd, Hyperlas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Dansoa (India) Ltd, Torchat of M/s Torchtar membranes & bitumen products Pvt Ltd, M/s Fosroc Chemicals, Asian Paints Smartcare APP membranes of M/s Asian Paints Ltd.

Supply only integral liquid WPC of approved make complete all as specified and directed.

Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membrane and finally applying two coats of aluminium paint @ 0.10 litre/Sqm complete all as specified and directed by Engineer In Charge.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer in CM 1:4 mixed with integral water proofing compound finished as sand plaster complete all as specified and directed. (WPC shall be measured and paid separately)

Material and labour for rendering 15 mm thick in cement mortar 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick plastering in cement mortar 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 3mm thcik wall interior wall care putty and a coat of primer complete all as specified and directed

Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior primer on wall complete all as specified and directed

Material and labour for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of exisiting treatment on wall / ceiling surfaces and preparation of old wall surfaces by filling holes etc and applying two coats of acryalic weather proof exterior emulsion paint over a coat of exterior primer on wall complete all as specified and directed

Material and labour for complete removal of existing treatment (Paint / distemper on walls and applying 3 mm thick wall care putty after that applying two coat of distemper oil emulsion over a coat of alkali resistance primer on wall complete all as specified and directed.

Material and labour for complete removal of existing treatment of Surfaces of any description wood, steel, iron, concrete, brick, stone, etc including preparation and applying of two coat of fire resistance paint over and including a coat of primer complete all as specified and directed.

Material and labour for welding in repairs thikness of metal exc 6mm but n exc 9mm, exc 2.5cm but n exc 5cm in length complete all as specified and directed.

Supply and Fix in repairs 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Supply and Fix 15mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Fixing only tubes, of 15mm bore medium grade, to walls and ceilings or laying in floors complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Fixing only tubes, of 20 mm bore medium grade to walls and ceilings or laying in floors complete all as specified and directed.

Supply and Fix 20 mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Cutting chases, pinning in, making good to facings of stone / brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed

Dismentaling water tanks exceeding 250 liters and not exceeding 500 litres complete all as specified and directed

Dismantaling water tanks exceeding 500 litre but not exceeding 1000 litres complete all as specified and directed

Supply and fix 500 Litres ISI embosed (triple layer) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Supply and fix 1000 Litres ISI embosed (triple layer) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Disconnecting existing tanks capacity of tank exc. 250 litre and n. exc 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing tanks capacity of tank exc.500 litre and n. exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Material and labour for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.

Material and labour for 100mm dia cast iron Bends complete all as specified and directed.

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) bend complete all as specified and directed.

Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 580mm x 450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed

Supply and Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) complete all as specified and directed.

Supply and Fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Jaquar, Hindware, Parryware. Note: Model and design as approved by GE

Supply and Fix in repairs brass chromium plated tabular towel rail 20mm dia complete all as specified and directed.

Supply and Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams complete all as specified and directed. Make: Jaquar, Hindware, Parryware. Note: Model and design as approved by GE

Supply and Fix in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) add fixed in repairs including pan cover complete all as specified and directed. Make: Jaquar, Hindware, Parryware. Note: Model and design as approved by GE

Supply and Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed.

Supply and fix in repair, 10 litre capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed.

Supply and Fix in repairs PVC connection pipe 15mm dia and 450mm long complete all as specified and directed

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings. complete all as specified and directed

Supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32 mm ,45gms, suitable for vitreous china wash basin complete all as specified and directed.

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union complete all as specified and directed

Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws complete all as specified and directed. Make Jaquar cat no CAN-1153N or technocommerical equivalent

Supply and fix in repairs 1.2metre long chromium plated health foucet including holder fixed to wall. complete all as specified and directed. Make : Jaquar cat no ALD-CHR-573 or technocommerical equivalent

Supply and fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams/lintel beam, stair case, landing, chhajas and similar suspended work, complete all as specified and directed.

Material and Labour for RCC 1:2:4 type B1 (using 12.5mm graded crushed stone aggregate) in Chajjas, fins, roof projection etc , complete all as specified and directed.

Material and Labour for Form work to sides and soffits of chajjas, fins, roof projection,shelves including supports etc,to fair finished surface of concrete flat complete all as specified and directed.

Material and Labour for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips including anchoring and welding at places as directed complete all as specified and directed by Engr in Charge.

cleaning of any type of roof area exceeding 100 Sqm but not exceeding 300 Sqm, by removing leaves, vegatation growth, debris and accumulated mud by washing brushing or by any means without hampering the water proofing membrane(if provided) from permanent roof not accessible including cleaning of rain water pipes of any description and removing debries/spoil from site and depositing the same to low lying area exceeding 0.5 km and not exceeding 1.5km complete all as specified and directed.

Cleaning under ground sewage line 150mm dia from manhole to manhole full of waste solids/liquid mud or sludge deposited in these lines by rodding manually or through mechanical means between manholes and removing sludge (obtained from cleaning of sewage line) to a distance exc 100 metre but n.exc 150 metre from the site and disposed off as per the directions of Enginer-in-charge.

Cleaning of under ground sewage line by excavation and breaking the existing sewage line (minimum two pipe length), removing the blockage, rejoining with new pipe length complete including material and labour, necessary excavation, returning filing, supply of new SGSW/RCC pipe grade ‘A’ of required lengths & required bore, haunching the new pipe length with PCC 1:4:8 type D-2 (using 40mm graded single aggregate) all as directed in situations where cleaning is not possible by rodding, at any depth for 150mm dia pipe complete all as specified and directed.

Excavation in trenches; not exc 1.50 metre depth & n. exc1.50metre wide for foundation & getting out in soft/loose of soil complete all as specified and directed.

Demolition & breaking up drain pipes (salt glazedwere/AC/RCC ) set in cement mortar, dia of pipe 150 mm dia all as directed at site complete all as specified and directed.

Material and labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded crushed stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes of 150 mm dia after they are laid tested complete all as specified and directed. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm.

Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface n exc. Granite or Trap Stone complete all as specified and directed.

Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600mm x 600mm x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on ArmstrongSuprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system complete all as specified and directed.

Fixing only false ceiling particle board/tiles for insulation and acoustic purposes, 60x60 cm in size fixed on old frame work snap grid all as specified hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats all as specified and directed.

Material and labour for dismantling and taking out existing strip type lightening arrestor and refixing the same in position with fixtures and fittings and making good disturbed portion on roof surfaces complete all as specified and directed.

Supply and Fix in repairs brass body 300mm ordinary helical door spring including roller and roler plate complete all as specified and directed.

Supply and Fix for plain Aluminium alloy 31000 H4 sheeting 1.00mm thickness for ridges, hips valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed

M/S.J.V.Datar

M/S NILESH BUILDERS

S.K.HARAL

Sunil Constructions

M/S SAMRUDHI CONSTRUCTION

AJAY ENTERPRISES

sanjay m. suryawanshi

Baljeet Singh Choudhari