CERTAIN REPAIRS TO WOODEN JOINERY TILLING AND PLUMBING WORK IN CERTAIN MD QTRS SP AREA OF AGE BR I UNDER GE AF SUBROTO PARK

Amount

Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-in-charge.

Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed by Engr-in-charge.

Dismantling of Plain or corrugated steel/Aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling of wrought iron or mild steel works of any description , size or in any position including door, gates etc complete all as specified and directed by Engr-in-charge.

Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm complete all as specified and directed by Engr-in-charge.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed by Engr-in-charge.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc similar work conforming to Fe.290.Gde-E-165

S & F Pipe, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) and similar work conforming to Fe-290 Gde E-165

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series) complete all as specified and directed by Engr-in-charge..

Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14 (3000 series).

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium frames glazed with putty or fixed with bead. Note :-(Old bead to be reused to fix glass) complete all as specified and directed.

S&F 4mm thick frosted float glass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window frame complete all as specified and directed by Engr-in-charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed by Engr-in-charge.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete all as specified and directed by Engr-in-charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., , size 165x60mm incl frame back filling with PCC 1:3:6 complete all as specified and directed by Engr-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed.

Supply & fixing block board 18/19 mm thick, grade 1st quality, exterior BWP grade termite proof, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Its class HW (Teak) or 0.5 mm thick PVC sheet lipping all around, fixed in repairs, complete all as specified and directed by Engr-in-charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed by Engr-in-charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and directed by Engr-in-charge.

M&L for 12 mm thick cement plaster in cement mortar 1:6 on brick surfaces of brick work and finished even and smooth w/o using extra cement in patch work complete all as specified and directed by Engr-in-charge.

M/L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening complete all as specified and directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.

S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specified and directed.

S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed.

M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed by Engr-in-charge.

M&L for vitrified double charge tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L Glazed printed/ coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in Charge.

Demolition to brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure.

S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge banding in matching colour over all exposed edge complete all as specified and directed by Engr-in-charge.Make Rajshri/ Sintax

S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed. Make Rajshri/ Sintax

S&F factory made 5mm thick PVC sheet of density 600kg/cum manufactured by an ISO-900-2008 certified company. Plain 5mm thick PVC sheet panelling for back side(wall side) Complete all as specified and directed. Make Rajshri/ Sintax

S&F 100 mm size Stainless Steel handle, complete all as specified and directed by Engr-in-charge.

S&F 38mm size Stainless Steel Piano hinges complete all as specified and directed by Engr-in-charge.

M &L for ABS body magnetic latches of size 50mm complete all as specified and directed by Engr-in-charge.

M&L for repair to broken sides/bottom of roof projection , facia by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3, type A-0, using 12.5 mm graded stone aggregate etc, using chicken wire mesh to reinforce & form work as required with wocoats of Appex paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

Demolition of plain cement concrete in ground floors n. exc. 15 cm in thickness (below or above GL)unreinforced complete all as specified and directed by Engr-in-charge.

M& L for 80 mm thick, M-40 grade machine pressed rubber form moulded precast interlocking concrete paver block over sand cushion in any shape and size as approved confirming to IS 15658-2006 complete all as specified and directed by Engr-in-charge.

M&L for Chequered cement concrete coloured tiles with glossy finished 22-25mm confirming to IS -1237 (rubber form moulded)any size in floors etc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified.

M&L 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down or up steel water tubing and connections including cleaning for re-fixing of 15 mm bore removing the debris including mortar out side defence land complete all as specified and directed by Engineer-in-Charge.

All as per above Item No 58 above but 20 mm bore.

S & F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.

All as per Item No 3 above but 20 mm bore.

S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-Charge.

S&F in repairs HDPE PVC lid (cover) for 500/1000 Litres capacity PVC tank complete all as specified and directed by Engineer-in-Charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib tap long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair two way stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engineer-in-Charge. Make : Hindware / Parryware / Cera

S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cisterncomplete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china coloured wash down water closet pan two pieces (Couple closet) with 'P' or 'S' trap, Soft close PVC seat cover and twin flushing cistern complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar / Hindware / Parryware

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar / Hindware / Parryware

S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. Make : Jaquar / Hindware / Parryware

S&F in repairs CP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge. Make : Hindware / Parryware / Jaquar

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge. Make- Commander / Cera / Parryware

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No ALD-565 of Jaquar or equivalent in Hindware / Parryware

S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.

S& F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.

S&F in repair PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed.

S& F in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.

S&F in repair PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) floor trap 75mm with grating including jointing with solvent complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR)'S' trap 75mm with grating including jointing with solvent complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Aluminium die cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and directed by Engr-in-charge.

shiva enterprises

J D ENTERPRISES

TUSHAR ASSOCIATES