Repair Renovation of various residential building under Shimla Division No. III SH Renovation of official residence building at Oakover Shimla-2

Amount

Demolishing cement concrete manually / by mechanical means including disposal of material within all lead and lifts as per direction of Engineer - in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within all leads & lifts as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows of area 3 sq. metres and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all lead as directed by the Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lifts as directed by the Engineer-in-charge.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts including carriage of materials.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(i) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (i) Second Class Deodar wood. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(i) Rai wood/Kail wood/Chil Wood complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 12mm thick ply wood Conferming to IS in Plain lining/ Panelling/ under Floors with Necessary Screws/ nuts & Bolts/ Nails etc. fixed on wooden Frame/ Steel frame ( Frame work Shall be Paid Seprately) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and 100mm thick Glass wool resier bonded fiber insulation of Density 24Kg./Cubic Metre Complete in Ceiling complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing 4mm thick teak ply conforming to ISI in plain lining/panelling fixed with approved adhsive and nails etc.complete as per direction of Engineer-in- charge (Frame work shall be paid for separately) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (i) 35mm thick Shutters Second Class Deodar wood.

Providing and fixing 35 thick Sal wood panelled or panelled and glazed shutters for doors, windows and clerestory windows, ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, including panelling all complete including carriage of materials in all leads and lifts as per the same satisfaction and direction of Engineer-In-Charge.

Providing and fixing 19mm thick commercial board ISI mark in Shutter for cupboard etc. including fixing with nickel plated piano Hinges with screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 19mm thick commercial board ISI mark in shelve / box for cupboard with butt joints and fixing with nails and screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 12mm thick imported pine wood ceiling/ panneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete complete .as per direction of Engineer-in- charge including carriage of materials within all leads and lifts.

Providing and fixing ACP sheet 6mm thick in linning/ceiling/walls, doors/panelling fixed with self drilling screws etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing 35 mm thick second Class deodar wood Heritage panelled shutters/Screen complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets fixed with approved adhesive and nails etc.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and Fixing 40x12mm Hard wood Corner complete fixed with Screws in Glazing complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 75x40mm wooden moulded corner beading of triangular or required shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 60x20mm wooden moulded corner beading of triangular or required shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete with First class Deodar wood. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 80x20mm wooden Square edge beading of triangular or required shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete with First class deodar wood including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing hard wood plain square edged cover fillets (beading) 19mmx6mm section with wood screws in ceiling and lining etc. including mitring at junctions complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing hard wood plain square edged cover fillets (beading) lipping 18mm x 5mm section with wood screws in ceiling and lining etc. including mitring at junctions complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing Hard wood Taj beading of 25x6mm section with woodils/ screws etc. in ceiling and lining including mitring at junction scomplete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 100x25mm Second class deodar wood moulded beading fixed with iron screws, plugs etc. and priming coat on unexposed surface etc. including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 100mm X 25mm thick 2nd class deodar wood weather board including fixing in position complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing 50x35mm First class Deodar wood moulded corner beading of triangular or required shape to the junction of panelling etc. fixed with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.(i) 125mm

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.(i) 100mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge(i) Double strip (horizontal type)

Providing and fixing Stainless Steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge : 300x10 mm

Providing and fixing Stainless Steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge:250x10 mm

Providing and fixing 1.5 mm thick PVC/ Rubber tiles flooring of approved make plain, coloured corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treatment (to be measured separately) for payment complete in all respects as directed by the Engineer-In-Charge including carriage of materials in all leads and lifts.

Providing and laying Glazed Ceramic floor tiles ofapproved size, colour and shade (thickness to be specified by the manufacturer),1st quality conforming to IS : 15622, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and laying double charged vitrified floor tiles in different/required sizes, and approved thickness with water absorption less than 0.08% and conforming to IS: 15622, of approved make, colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement matching pigments etc.complete including carriage of materials within all leads and lifts.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Steel work welded in built up sections in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint using structural steel in gratings framed guard bars, ladders, railling, brackets and similar works complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and fixing M.S welded mesh 25mmx25mm size 3mm thick as per approved design welding with electric plant complete including applying priming coat of red lead paint complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc. stacking the servicable materia and disposal of undervicable materials as per the direction of Engineer-in-charhe complete including carriage of material in all leads and lifts.

Providing corrugated G.S. sheet roofing 0.63mm including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead or self drilling screws etc. including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers or self drilling screws etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge(i) 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers or self drilling screws etc. complete . including carriage of materials within all leads and lifts (i) 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing polycarbonate transparent sheet 6.0 mm thick in roofing with galvanised Jor l hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories asrequired in all leads and lifts as per direction of Engineer-in-charge.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding carriage of materials within all leads and lifts.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat of approved brand and manufacture complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Wall painting(one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Finishing walls with Acrylic Smooth exterior emulsion of required shade complete including carriage of materials within all leads and lifts:- Old work (One or more coat applied )complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. (Two or more coat applied) of approved brand and manufacture.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Applying a coat of mordant solution on G.S. sheet With a solution of 38 gms of copper acetate in a litre of soft water complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(I) New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution

Polishing required coats with Melamine polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler up to all heights in all floor levels complete with scaffolding works including carriage of materials within all leads and lifts.

Providing and fixing 20 mm dia stainless steel curtain rod having wall thickness of 1.25mm with two stainless steel brackets fixed with C.P. brass screws and PVC sleeves and finnal etc.wherever necessary complete including carriage of material within all leads and lifts

Providing and fixing 110mm X 75mm size PVC Finolex type "A" floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads an lifts.

Providing and fixing 75mm nominal size high pressure PVC (finolex) Type-A spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts.

Providing and fixing 75 mm dia PVC type "A" collars ISI marked including fixing with approved adhesive etc.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing 75 mm dia PVC type "A" door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including carriage of materials within all leads an lifts.

Providing and fixing 75 mm PVC finolex type "A" single equal branch door tee ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-

Providing and fixing 8mm thick high density fiber board Pergo AC-4 in Flooring / wall lining Pre-laminated one side decorative and other side plain, having density of 800-1000 kg/m³ :with under layer 2mm thick P.P sheet necessary fixing arrangement and screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing profile of Pergo HDF AC-4 laminated sheet with necessary fixing arrangement and screws etc. complete including carriage of materials within all leads and lifts.

Up-holstering of sofa Single Seat and Back with markin OR Tapestry Cloth Cutting to Shape , stiching and fixing etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Up-holstering of sofa Double Seat and Back with markin OR Tapestry Cloth Cutting to Shape , stitching and fixing etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Up-holstering of sofa Three Seat and Back with markin OR Tapestry Cloth Cutting to Shape , stitching and fixing etc. complete.complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Up-holstering of sofa Four Seat and Back with markin OR Tapestry Cloth Cutting to Shape , stitching and fixing etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.(i) Concealed work, including cutting chases and making good the wall etc.(a)1216 (16 mm OD) pipe

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.(i) Concealed work, including cutting chases and making good the wall etc.(a)1620 (20 mm OD) pipe

Providing and fixing 15mm nominal bore C.P. brass Sink mixer of ESS Ess conforming to IS:complete Cat No. BASM-102 N complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge

Providing and fixing C.P. brass Angle cock 15mm (fifteen millimetre) nominal borecomplete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. Ess Ess Make Cate No. THAC-101

Providing Modular Kitchen base unit 900mm in HDHMR termite and moisture proof board with soft close tandems for cutery and Two multiple use drawers, base unit 250mm in HDHMR with bottle pull out ,base sink with 1200 mm base HDHMR board with Bin holder , base corner with 1100mm on with Magic "S" Corner , with soft close Mechanism , easy to fit and stable with up to 20 Kg. load capacity , double high railing to better hold goods in each shelf and the other on with wooden shelves for multiple use , base unit 500 mm with soft close tandems for utensils , Base unit 500mm with soft close taandems for multiple utensils or multiple use , base unit 400mm for Gas Cylinder storage , Base unit 500mm with grain tandem with capacity to hold up to 35 Kg., Wall unit 500mm for Geyser provision, Wall unit 900mm with stainless steel dish rack and lift up Channels of Haffle/Blum, Wall units 800mm Hydrolic hinges and with Glass Or Wooden Shelves for Multiple Storage,Carcases will be made up of Action Tessa HDHMR Board which is not only tougher than any other available plywood, Base unit shutters will be made of MDF with merino MR+finish Laminates with high gloss & micro scratch resistance property that provides 4 times longer with Colours of Choice, Visible sides also of Merino Laminates as per the Choice of Colours for base wall units, Nickle Plated soft close hinges of Haffle / Hettic with unique built in damping system that allows the shutter to close in slow motion without banging . Special cover plate provided and avilable in full overlay , half overlay and inset, Handle less Profile -Clean and Contemporary appearance of the handle less Kitchen with the Benefits as they take less room than a handed kitchen , corners can betighter together , moreover cleaning of the kitchen is more partical , far easier to leave door shutters streak free without the need to clean around handles , which also makes this style of kitchen more hygienic as dirt can't accumulate in those hard to clean areas around handles, Soft close Channels and tandems of Hettich/ Haffle.

Jibachh Goswami

Kailash Chand