Upgradation of Divisional Workshop at Magyote, Udhampur by way of execution of balance Civil Works in District Udhampur

Upgradation of Divisional Workshop at Magyote, Udhampur by way of execution of civil works

EARTHWORK IN BULK EXCAVATION BY MECHANICAL MEANS(HYDRAULIC EXCAVATION)OVER HEAD

FILLING AVAILABLE EXCAVATED EARTH IN TRENCHES,PLAIN,RIDES OF FOUNDATION etc

PROVIDING AND LAYING 1:4:8 CEMENT CONCRETE

PROVIDING AND LAYING 1:3:6 MIX CEMENT CONCRETE

PROVIDING AND LAYING 1:1.5:3 MIX CEMENT CONCRETE

PROVIDING AND LAYING 60MM THICK FACTORY MADE CEMNET CONCRETE INTERLOCKING PAVES BLOCK OF M-30 GRADE MADE BY BLOCK MAKING MACHINE WITH STRING VIBRATORY COMAPCTION AND A APPROVED SIZE AND DESIGN/SHAPE LAID IN REQUIRED COLOUR AND PATTERN INCLUDING 50MM THICK COMPACT BED OF FINE SAND FILLING THE JOINT WITH COARSE SAND etc.

BRICKWORK WITH COMMON BURNT CLAY BRICK OF CLASS DESIGNATION 7.5 IN FOUNDAION AT PLINTH INCLUDING CURING

15mm THICK CMENT PLASTER WITH 1:6 mix

EXTRA BRICKWORK FOR SUPER STRUCTURE ABOVE PLINTH LEVEL

PROVIDING AND LAYING VITRIFIED FLOOR TILE IN DIFFERENT SIZE LAID ON 20MM THICK CEMENT MORTAR INCLUDING GROUTING THE JOINT WITH WHITE CEMENT

PROVIDING AND LAYING VITRIFIED TILES I DIFFERENT SIZE IN ALL COLOURS AND SHAPE IN SKIRTING, RISER STEPS 12MM THICK BED OF CEMENT MORTAR 1:3 GROUTING THE JOINT WITH WHITE CEMENT

PROVIDING AND FIXING ALUMINIUM WORK FOR DOOR,WINDOW,VENTILATOR

STRUCTURAL STEEL WALL IN BUILT UP SECTION TRUSSES AND FORM WALL INCLUDING CUTTING HOSTING FIXING IN POSIION AND APPLY PRIMER COAT OF APPROVED SHADE

PROVIDING CORRUGATED G.S. SHEET ROOFING INCLUDING VERTICAL/CURVED SURFACE FIXED WITH POLYMER COATED J or L HOOK, BOLT AND NUTS 8mm DIAMETER WITH BITUMEN AND G.I. LIMPET WASHERS OR WITH GI LIMPET WASHRS FILLED WITH WHITE LEAD AND INCLUDING A COAT OF APPROVED STEEL PRIMER AND TWO COATS OF APPROVED PAINT ON OVERLAPPING OF SHEETS COMPLETE (UPTO ANY PITCH IN HORIZONTAL/ VERTICAL OR CURVED SURFACE) EXCLUDING THE COST OF PURLINS, RAFTERS AND TRUSSES AND INCLUDING CUTTING TO SIZE & SHAPE WHEREVER REQUIRED. 0.63 MM THICK WITH ZINC COATING NOT LESS THAN 275 gm/sqm.

CONSTRUCTION OF 1 NO underground water tank of size 3 mtr.X 3 mtrX3 mtr with 9 inch thick brick work in cement mortar 1:4, plastering of inner walls in CM 1:4, 5 inch thick slab, 4 inch thick flooring in 1:2:4 over 4 inch sub base 1:4:8, Man hole cover of size 2'X2' as approved by the Engineer Incharge

CONSTRUCTION OF 1 NO underground waste Transformer oil storage tank of size 2 mtrX 2 mtr X 2 mtr with 9 inch thick brick work in cement mortar 1:4, with 5 inch RCC slab and Manhole cover of size 2'X2' and providing of Vitrified tiles on walls and floor in cement master 1:3 including providing & laying of PVC pipe 4 inch dia (approx. quantity 20 mts in length)

SANITORY FITTING TO 2 NO BATHROOM AND 1 NO WASH ROOM INCLUDIG ALL FITTING, SEAT WITH COVER, JET WASH BASIN BIB COCK etc COMPLETE WITH ISI MARK AS PER DIRECTION OF ENGINEER INCHARGE .

DISTEMPRING WITH OIL BOUND WASHABLE DISTEMPER OF APPROVED BRAND AND MANUFACTURER TO GIVE A EVEN SHADE OF NEW WORK

STEEL REINFORCEMNT FOR RCC WORK INCLUDING TRENCHING, CUTTING, BENDING, POSITION AND BINDING ALL COMPLETE ABOVE PLINTH LEVEL FOR TRUSS BOLT

vinay kumar

m/s sidhant gandotra govt contractor civil and general order supplier

sanjeev singh