76 H(F)(W)/2025-26

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

G.I. Pipe 6'' dia

Copper L Piece for 250 KVA T/F

Stay clamp with nut & bolt

G.I. Pipe with Clamp

Stone Pad

Aluminum Lug long barrel 400 sqmm

Aluminum Lug long barrel 120 sqmm

Holding Clamp with Nut & Bolt

Distribution Box Clamp

Nut & Bolt

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 30 Kms. (distance approx)

S.T. Pole 11 Mtr. long

PCC Pole 8.5 Mtr. Long

Transformer 250 KVA

11 KV XLPE Cable 3x185 sqmm

11 KV Out door Cable Jointing kit 3x185

11 KV Staight Through Cable Jointing Kit 3x185 sqmm

AB Cable (3x120+1x95+1x16)

Distribution Box 3 Phase

11 KV Fuse Set

11 KV TPMO Set

L.T. XLPE Cable Al 1x400 sqmm

Al. Cable XLPE 1x400 sqmm

11 kv VCB for outgoing CTR 200/100/5 Amp. 350 MVA

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Mounting of 250 KVA Transformer as per RESSPO Norms.

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Erection & Commissioning of of 3 Phase/Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Connection of L.T. XLPE Cable Different Size & Different Places

Laying of 11 KV XLPE Cable 3x185 sqmm underground by HDD (HORIZONTAL DRILL DIRECTION) Method by HDD Machine Complete in all Respect as per norms. (All the material will be supplied by the contractor .

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of 11 kv VCB for outgoing CTR 200/100/5 Amp. 350 MVA complete work with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm including control wiring, commissioning & testing in all respect as per RESPO norms.(All decentralised materials to be provided by Contractor).

Construction of Plinth of Transformer Size 2x2x1.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Missnary Type Fuse set (Tailless unit) for 250 KVA Suitable for Iron gate, Including All Accessories like CU , Bus Bar, Spring, Contract, Back Entry, Alu, Crimping lug, Brass Coupling, Copper L- Pice and Earthing as per Norms .Including Labour and GST.

Laying of L.T. Cable Size (1x400 ) sqmm

Contreting of Pole with Muffing

M/S SATYAM TRADING COMPANY (BID ID -5528313)