DEFPROC

AOC

Works

Civil Works - Canal

REPAIR TO CRACK FILLING AND DAMAGE SURFACE OF RUNWAY BY USING COLD POLYMERIC BITUMEN EMULSION TREATMENT AND CERTAIN OTHER WORKS AT AIR FORCE STATION UDHAMPUR

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

AF STATION UDHAMPUR | Udhampur, Jammu And Kashmir

Amount: Refer DocsCloses: 4 Jan 2021Closed

Timeline

Published7 Dec 2020
Closed4 Jan 2021
Technical Evaluation9 Jan 2021
Financial Evaluation11 Jan 2021
Awarded13 Jan 2021

Bids

7 Bids13 Jan 2021

#	Company	Amount	Rank	Status
1	SHIVAE CONSTRUCTION L1₹19.0 LAccepted-AOC 94 PHASE II HOUSEING COLONY UDHAMPUR J K \| UDHAMPUR \| JAMMU AND KASHMIR \| 182101	₹19.0 L	L1	Accepted-AOC LOWEST QUOTED
2	SARDALIA CONST CO L2₹20.8 L+₹1.8 L (9.46%)Rejected-Finance BIR SARDALIA RESIDENCY AIR FORCE ROAD BARYAL UDHAMPUR 182101 J K \| UDHAMPUR \| JAMMU AND KASHMIR \| 182101	₹20.8 L+₹1.8 L (9.46%)	L2	Rejected-Finance OTHER THAN LOWEST QUOTED
3	kerni electricals L3₹21.6 L+₹2.5 L (13.4%)Rejected-Finance KERNI MARKET COURT ROAD UDHAMPUR J K 182101 \| UDHAMPUR \| UDHAMPUR \| J K \| 182101	₹21.6 L+₹2.5 L (13.4%)	L3	Rejected-Finance OTHER THAN LOWEST QUOTED
4	shakti builders L4₹24.4 L+₹5.4 L (28.3%)Rejected-Finance	₹24.4 L+₹5.4 L (28.3%)	L4	Rejected-Finance OTHER THAN LOWEST QUOTED
5	TRIDEV HOT MIX PLANT L5₹25.8 L+₹6.8 L (35.6%)Rejected-Finance	₹25.8 L+₹6.8 L (35.6%)	L5	Rejected-Finance OTHER THAN LOWEST QUOTED

Tender Value

Refer Docs

EMD Value

₹60,000

Closing Date

4 Jan 2021, 6:00 pmClosed

Tender Inviting Organisation

Name

GE AF UDHAMPUR

Address

GE AF UDHAMPUR,PIN-182101

Work Description

REPAIR TO CRACK FILLING AND DAMAGE SURFACE OF RUNWAY BY USING COLD POLYMERIC BITUMEN EMULSION TREATMENT AND CERTAIN OTHER WORKS AT AIR FORCE STATION UDHAMPUR

Tender Information

Tender ID

2020_MES_401548_1

Reference Number

GEAFU-48/2020-21

Tender Type

Open Tender

Product Category

Civil Works - Canal

Form of Contract

Item Rate

Period of Work

270 days

Location

AF STATION UDHAMPUR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

Required(i) Scanned copy of application on letter head of firm requesting issue of tender (.pdf)

Required(ii) Scanned copy of cost of tender in form of DD of Rs. 500.00 in favour of GE (AF) Udhampur (.pdf)

Required(iii) For unenlistment contractors copy meeting enlistment criteria of MES in class D category a (I) (.pdf)

Required(iv) Documents in supports of EPF code number and EPF registration (.pdf)

Required(v ) Documents in supports of GST registration (.pdf)

Required(vi) Copy of enlistment letter (.pdf)

Finance

RequiredBOQ_48 (.xls)

RequiredTENDER DOCUMENTS_48 (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE AF UDHAMPUR

EMD Fee Amount

₹60,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 Jan 2021

Published

7 Dec 2020

Bid Opening

6 Jan 2021

Download Starts

7 Dec 2020

Download Ends

4 Jan 2021

Submission Starts

21 Dec 2020

BOQ Preview

•

Amount

•

Labour only for totally cleaning the top surface with steel wire brushes and finally fanning with compressed air to making the surface free fromall loose materials i.e dirt/dust etc. to entire satisfaction of Engr-in-charge, and applying cold polymeric bitumen emulsion (PME) mopping of total cold liquid PME (minimum 1.0 to 2.0 litres per sqm for two coats after dilution with 50% water), each coat diluted in the ratio of 1:1 (PME: WATER) and ensure uniform finish of runway complete all as per manufacturer's instructions and all as specified and as directed by Engr-in-Charge. Notes: The tenderer shall take into consideration for the following points while quoting his rates for the item:- (a) Cold polymeric bitumen emulsion (PME) consumed under this item shall be measured and paid as supply only under srl item No. 03 here in after. (b) Consumptuon of the PME as specified in clasue 5.13.3.3(c) is to be approved by BOO convened by Accepting officer before commencement of the work for different area pocket of the runway. (c) The work shall be carried out through authorized and qualified applicator of the manufacturer only. (d) Care shall be taken to fill wider gaps/cracks with 0.6mm to 2.36mm size coarse sand as per manufacturer's instructions.

•

M&L for repair to cracks of width 2 to 8mm in flexible surfaces by cleaning of all cracks with air compressor and make it free from dust and applying evenly blown hot bitumen of grade 85/25 in two coats with necessary interval to ensure complete filling/ total filling of the gap in line with existing pavement, finally dry coarse sand mixed with cement in 1:1 ratio sprinkled on top complete ensure uniform finish all as per manufacturers instruction and all as specified and as directed by Engineer-in-Charge. Note : Before start the work all cracks to be measurted in presence of Engr-in-Charge.

•

Supply only cold polymeric bitumen emulsion (PME), all as specified. Notes: (a) Only undiluted quantity will be measured under this item.

•

SARDALIA CONST CO

•

kerni electricals

•

shakti builders

•

TRIDEV HOT MIX PLANT

•

NEW GURBINDER INDUSTRIES

•

HANS RAJ SHARMA

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.06 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .