Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.5 LAccepted-AOC PLOT NO 58 SUNDARAM NAGAR 3RD STREET THOOTHUKUDI | ₹16.5 L | 1 | Accepted-AOC ACCEPTED |
| 2 | 2₹16.7 LRejected-AOC | ₹16.7 L | 2 | Rejected-AOC REJECTED |
| Sl No | Description | Qty | Unit | S.RAMBOLA L2 | IJ Constructions L1 |
|---|---|---|---|---|---|
| 1.00 | Engaging JCB for dismantling the existing Park Compound wall including labour charges and all incidential charges such as fuel etc., complete as per standard specification | 24 | 1Hrs(One Hour) | 800 ₹19,200 | 784 ₹18,816 |
| 2.00Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. | |||||
| 2.10 | For Foundation Footing | 20 | 1M3(One Cubic meter) | 200 ₹4,000 | 198 ₹3,960 |
| 2.20 | For Kerb Wall | 19 | 1M3(One Cubic meter) | 118 ₹2,242 | 115 ₹2,185 |
| 3.00 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly)
using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever
necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including
curing etc. complete complying with standard specification and as directed by the departmental
officers -Mixing by mechanical means | 13 | 1M3(One Cubic meter) | 5,520 ₹71,760 | 5,518 ₹71,734 |
| 4.00Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). | |||||
| 4.10 | For Column | 165 | 1M2(One Square meter) | 650 ₹1.1 L | 645 ₹1.1 L |
| 4.20 | For footing, Grade beam, Kerb wall and SWD | 21 | 1M2(One Square meter) | 655 ₹13,755 | 654 ₹13,734 |
| 5.00 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement
grills of all variety like HYSD/CTD/TMTand all grade like Fe 500,
Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel
reinforcement and G.I. binding wire, wastage etc. complete complying with standard
specification and as directed by the departmental officers.(Contractor has to make his
own arrangements for the supply of steel reinforcement and binding wire). | 600 | 1Kg (one Kilo gram) | 95 ₹57,000 | 94 ₹56,400 |
| 6.00Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). | |||||
Tender Value
₹22 L
EMD Value
₹22,000
Closing Date
12 Feb 2026, 3:00 pmClosed
COMMISSIONER
113 Thamilzh Salai(Palai Road) Thoothukudi Corporation
Formation of New park at Rahmdullapuram in Ward 29 at East Zone in Thoothukudi Corporation
2026_MAWS_651736_1
247/25-26/AEE(E)
Open Tender
Civil Works
90 days
THOOTHUKUDI CORPORATION
Refer Technical Bid
2 documents required · 2 mandatory
₹0
₹22,000
27 Mar 2026
5 Feb 2026
12 Feb 2026
5 Feb 2026
12 Feb 2026
10 Feb 2026
Engaging JCB for dismantling the existing Park Compound wall including labour charges and all incidential charges such as fuel etc., complete as per standard specification
Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.
For Foundation Footing
For Kerb Wall
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
For Column
For footing, Grade beam, Kerb wall and SWD
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire).
Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
For Foundation and Basement
For Ground floor
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means
Brick work in following Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.
Supply and filling in foundation and basement with Well Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.- Basement filling
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers.
Developing landscape work by korean Grass, the area tobe developed with the green carpet of koren grass would br levelled with a mild uniform slope to avoid water stagnation problem and to provide clear view of the landscape from any point of the premise, after levelling the prepared soil bed is raised to the necessary height and slope using rich soil mixture of red soil FYM (Farm Yard Manure) micro Nutrients, Fungicide would be spread over the levelled ground for a height of 0.15mts. then the ground would be watered for a week to enable the weeks in the prepared soil bed to germinte. the germinated weed soil be removed completely. then the developed lawn turfs is spread over the prepared area from the lawn within 1 week (Turfs are developed in the nursery under controlled chambers and treated to given resistance against the fungal activities) then the lawn has to be watered regularly so as to maintain its lush every day for a period of 1 month after planting/turfing. But at the same time stagnation of water shouldficers- The coarse and fine aggergates to be used should comply with the requirments of IS Standards. (No separate payment will be made by the Department for the excess usage of ma)
Supplying and Planting of Raphis palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (GCC SOR PD-2042 SL.NO.120)
Planting of Ficus benjamina green ornamental foliage Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of required size, planting of sapling, refilling of excavated earth etc as directed by the site in charge. (GCC SOR PD-2060 SL.NO.138)
Supplying and Planting of Swietenia macrophylla tree sapling of height2 40–300cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (GCC SOR PD-2156 SL.NO.234)
Planting of Thuja ornamental foliage Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (GCC SOR PD-2073 SL.NO.151)
Supplying and Planting of Plumeria tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (GCC SOR PD-2148 SL.NO.226)
Supplying and Planting of different types of artical plants, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. LR
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Wiring with2x1.5sq.mm.PVC insulated unsheathed FRLSSC copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall with PVC accessoires with cover for making good of the concealed portion with suitable colour for PVC concealed light point SD24A
Supply and fixing of 9W LED bollard light fitting complete wall with PVC unsheathed FRLS Copper leads from terminals to the fitting SD87A
Supply and fixing of 60mm dia MS pipe 5mm thick (Class'B')of2.40 metre length with painting metalic paint suppory by oncreting and constructionon masonary pedestal fixing of two nos of 100W LED outer flood warm light fitting SD98A
Supply and fixing of 100mm dia Ornmantal MS pole 5mm thick of 3.00 metre length with painting metalic paint suppory by oncreting and constructionon masonary pedestal fixing of of 60W LED shieled outer warm light fitting SD98B
Supplyandrunof2of4sq.mm. PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgradein25mmdiaGI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD-70
Supply, Delivery and Fixing of Three Seater siting bench arrangements by using RCC precaust slabs (cost includes cement,sand,steel,labour,oxide paints etc., complete) as directed by departmental engineer
Supply, Delivery and Fixing of Double seesaw with back seats of length 1.8m as interval of 1.2m the support pipe of size 75mm dia. GI pipe (cost includes cement,sand,steel,labour etc., complete) as directed by departmental engineer as per specification.
Supply, Delivery and Fixing of Swing 2 seater-FRP seat length of 3m and height of 2.5m. Vertical triangular shape of two pipes and horizontal pipe of 80mm dia. The seats of 40cm hanging with chain as per technical drawing.(cost includes cement, sand, steel, labour etc., complete) as directed by departmental engineer
Supply, Delivery and Fixing of one straight slide 14' long with steel with ladder using in M.S.pipe of 80 mm dia.,40mm dia Compited as per specification and Drawing. ( FRP wave Slide 14 ft feet long slide new sai fibers )
Supply, Delivery and Fixing of Merigo rpund 4 seater-FRP seat 1.80m dia . Vertical triangular shape of two pipes and horizontal pipe of 80mm dia. The seats of 40cm hanging with chain as per technical drawing.(cost includes cement, sand, steel, labour etc., complete) as directed by departmental engineer
Supply, Delivery and Fixing of different designs of dustbins made of six layer bonding of glass fibre such as Fish dustbin (2.75 Ft ht) Rabbit Dustbin (2.75 Ft ht) Monkey Dustbin (2.75 Ft ht) Cartoon Duck Dustbin (0.25 Ft ht) and Penguin Dustbin (2.75 Ft ht) including material cost conveyance charges as per the specifications directed by the department officers. ( Animal type Dustbin PS 80ltr)
Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection SD 159
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
Supply and fixing of plug and sockets in sheet steel encloser with 20A Single pole MCB
Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse uniT with 1No 40Amp30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection SD -128
Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps including all cost and conveyance of material and labour charges etc complete., SD-135
Earthing as per PWD standard with an earth electrode of 2metre Class'B'GI pipe of dia not less than 32mm complete with necessary masonry work.,SD-212
Supplying and laying Rubberised interlocking Paver block M35 grade of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 35 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
Bid2200.pdf
Tender Documents • 0.98 MB
BOQ_781505.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid