Supply and Commissioning of Portable Security cabin for various location at JIPMER, Puducherry

VOLUME V - BILL OF QUANITITY/ PRICE BID

Notice Inviting Tender Number: HITES/FM/JIPMER/Civil/2025-26/013 Dated: 09.02.2026

Name of Work : Supply and Commissioning of Portable Security cabin for various location at JIPMER, Puducherry.

Name of the Vendor :

SL NO. DETAILS OF WORK UNITS QUANTITY Rate (Rs.) in figures Rate (Rs.) in words AMOUNT

0.0 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge

0.0 All kinds of soil Cum 25 No Rupees Only

0.0 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering Allwork up to plinth level

0.0 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm Cum 25 No Rupees Only

0.0 Brick work with common burnt clay F.PS. (non modular) bricks of class designation 7.5 in foundation and plinth in:

0.0 Cement mortar 14 (1 cement: 4 coarse sand) Cum 20 No Rupees Only

0.0 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) Sqm 130 No Rupees Only

0.0 Supplying and commissioning of Portable Security Cabin of size 1800mm X 1800mm X 2400mm of approved colour, made up of Sandwich panels with Fibre-reinforced plastic (FRP) skins on both sides and Polyurethane foam (PUF) between. The cabin wall composed of 2mm thick FRP outer skin and 0.8 to 1mm thick FRP inner skin, in between polyurethane material is inserted. Overall thickness of the wall should be 30 to 50mm. The work includes providing 17/18mm thick moulded FRP door of size 850mm x 1850mm with Stainless Steel hinges, handles and locking system, providing powder coated aluminum sliding windows of size 1000mm x 1000mm on three sides of the cabin with rain protection of minimum 600mm and also the roof should be extended upto 600 -800mm towards front side to prevent splashing of rain water into the cabin, providing flooring with 18mm thick Fiberglass Reinforced Plywood Panels finshed with 1 to 1.5mm thick vinly flooring. The Cabin should be erected on mild steel framework with anti corrosion coating. The cabin base should be 150mm above ground level. The work includes providing wall mounted fan, LED light fixures, Telephone sockets, plug points, mini workbench with chair and storage cabinets. The rates should be inclusive of loading and unloading charges, transportation charges, and installation charges. nos 10 No Rupees Only

Total Amount in words : No Rupees Only

Note: The Bidder, at the Bidder’s own responsibility and risk, is encouraged to visit the Site of Works and obtain all information necessary for preparing the Bid. The Bidder shall quote his price which should include GST. In case of discrepancy in the rates quoted in words and figures, the rates in words will be considered for evaluation.

Digital Signature of Bidder