Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹39.1 L+₹1.4 L (3.60%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹40.4 L+₹2.6 L (6.99%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹40.5 L+₹2.7 L (7.08%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹40.8 L+₹3.0 L (7.95%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
29 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS PIN 913859 C/O 99 APO
SPECIAL REPAIRS TO BLDG NO P/O/13 A TO H (OR MARRIED ACCN) AT RUPA EAST OF AGE B/R II AND AGE E/M UNDER GE 859 EWS
2023_MES_601893_1
8434
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TO TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹74,000
Yes
1 Aug 2023
8 Jun 2023
30 Jun 2023
8 Jun 2023
29 Jun 2023
22 Jun 2023
Amount
Demolition of cement concrete(unreinforced) in ground floors n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforced cut as required to facilitate demolition) complete all as specified and directed.
M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges
S & F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over 20mm thick screed ned of CM 1:6 in floors complete all as specified.
M & L for PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in sub floor,sub base, floors and pavings etc complete all as specified and directed.
Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints,hacking for key,scrubbing down with water etc compleate all as specified and directed.
Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even & smooth without using extra cement compleate all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces with water proofing compound complete all as specified and directed.
M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble all as specified and as directed.
Material and labour for 75mm thick PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection/hard standing including finished surface finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.
Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc complete all as specified and directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
Material and Labour for reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed.
Material and Labour for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed.
Supply and Fix plate rack made of stainless steel 0.50mm thick,over all size 762mm(H) x 787mm (W)x254mm(D) complete all as specified and directed.
M & L for 350x250x7 mm/450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M&L non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tiles. etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
ditto as above item No 19 but as in vertical surfaces such as skirting/dado etc over and including 10 mm thick plaster in CM 1:4.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each not exceeding 0.11 sqm, in floor including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
Demolition of AC/PVC pipes 100/75mm dia complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix in rerpair 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.
Supply and fix in rerpair 75 mm dia. PVC (SWR) bends any radius, with access door complete all as specified and directed.
Supply & fix in rerpair PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
Supply & fix in rerpair PVC reducer 110mm to 75mm dia complete all as specified and directed.
Supply and fix in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
Material and labour applying for two coat of cement based paint over a coat of chalk whiting on new plastered surfaces including preparation of new wall surface complete all as specified and directed.
M&L Preparing new plastered surface of wall applying two coats of distemper oil emultion over a coat of cement primer, complete all as specified and as directed.
Material and labour for 5 mm thick rendering in cement mortar (1:4) on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
Taking down of existing tarfelt/membrane and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface by picking, sweeping, clean and washing down with water to remove dust etc.
M & L for cement concrete type B-0, 1:2:4 (12.5mm graded agg) in roof kerbs or mud stops, levelling course/ roof pedding, surface finished even and smooth without using extra cement.
M & L for Rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement and and intigiral liquid water proofing compound complete all as specified and directed. (Water proofing compound will be measured and paid sepreatly).
Supply only liquid water proofing compound Dr Fixit LW plus or equivellent as per manufacturar instructions.
M & L for SmartCare Damp Proof fiber reinforced elastomeric liquid applied water proofing membraneone coating of Asian paint or equivelent in fosroc/STP in horizontal roof surfaces, complete all as per manufacturar instruction and as directed by engr-in-charge.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4.00 sqm complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exceeding 1.5 sqm complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm sqm each including iron mongries complete all as specified and directed.
Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification & drawing.
Supply and fix in rerpair factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Supply and fix in rerpair 35mm thick 2nd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing in rerpair 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed.
Supply and fixing in rerpair 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed.
Material and labour for preparation of new wooden or wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fix 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.
Supply and fix 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.
Supply and fix Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed
Supply and fix Aluminium anodised barrel tower bolts 125 mm long of extruded section and fixed complete all as specified and directed.
Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fix 125 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fix aluminium alloy, anodised, sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane complete all as specified and directed.
Supply and fix 4 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 290-0 or Grade -E complete all as specified and directed.
Supply and fix Chromium plated curtain rod of medium weight and fixing brackets and decorative end supports etc complete all as specified and directed
S&F 18/19 mm MDF DWR prelaminated particale board ,interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination ,fixed with screws to timber frame work complete all as specified and directed.
M&L 2nd class hard wood in scantling clean swan timber fixed as directed.
Supply and fixing continuous hinges (Piano) hinges,30mm brass,bright finish or electro galvanised complete all as specified and directed.
M & L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.
M & L for Extruded brass handles, fabricated type polished of size 100mm complete all as specified and directed.
Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.
S & F in repairs chromium plated 15mm dia angular stop cock single way Make: Essco, Cat Part No. -APR-101053 and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S & F in repairs chromium plated 15mm dia concealed stop cock single way Make: Essco, Cat Part No. -MQT-514CKN and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S & F in repairs chromium plated 15mm dia pillar cock single way Make: Essco, Cat Part No. -COS-103001M and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
Supply and fix in repair vitreous china squatting pan 'Orissa pattern' size 580x440 mm white, with 'P' or 'S' trap front and back inlet with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding and making good to floor complete all as specified and directed.
Supply and Fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets etc complete all as specified and directed.
Supply and fix in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including 40 mm dia medium grade down take waste pipe and CI brackets complete all as specified and directed.
Supply and fix Waste coupling of PTMT (half or full threaded) .(Minimum weight 60 gms complete all as specified and directed.
Supply and fix PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.
Supply and fixing in repairs 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
Supply and fixing in repairs 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
S&F in Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Dismantling of water tanks exceeding 250 ltrs and not exceeding 500 ltrs capacity complete all as specified and directed.
Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc 250 litres & not exc 500 litres.
S & F in repair PVC water storage tanks of 500 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20 mm dia complete all as specified and directed.
S & F in repairs chromium plated fancy type 15mm dia bib tap, Make: Essco, Cat Part No. - COS-103037 and equlant model in Jaquar/Roca/Kohler all as specified and directed.
S & F in repair overhead shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing Make: Essco, Cat Part No. - EOS-542A and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S&F in repairs Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed,
S & F in repair sinks made of stainless steel with drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm.
Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar compleate all as specified and directed.
Material and labour for pre cast cement concrete 1:3:6 type C1 (20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
Preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Material and labour for Preparing previously treated plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
Material and labour for Preparing previously treated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Material and labour for complete removal existing surfaces and preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying two coat of distemper oil emulsion over a coat of wall care putty all as specified and directed.
Material and labour for complete removal existing surfaces and preparation of old painted surface of wall incl washing down and stoping of applying two coat of cement base paint (colour and tint as approved) on walls etc all as specified and directed
Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed.
M&L for Point wiring One light /Fan/Bell point controlled by one switch 6/5 Amp with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified. Make of Cable :- Havells/Polycab/KEI/Finolex
One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.
One 3 pin 6/5 Amp socket outlet controlled by one switch indep board.
M&L Point wiring of Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of Cable :- Havells/Polycab/KEI/Finolex
S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F bell push piano type one way 5/6 Amp, 240 volt including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F bell electric AC 240 volt, 50 HZ including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F lamp holder insulated body with back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F Regal Batten for LED Tube, universal batten for G 13, T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 & LTT8-20 or equivalent in Phillips/Bajaj/Havells
S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed. Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells
S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB DB CRCA sheet powder coated vertical type TPN 6 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables incl taking downt existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCCB 100 Amps, Four Pole, 16 KA 415 Volt including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including taking down unserviceable one and making good to disturbed surfaces complete all as specified and directed. Make of Cable :- Havells/Polycab/Anchor/Finolex NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S ASHOK CONSTRUCTION
M/S Karkies Construction & Co.
M/S MURPHEW ENTERPRISES
M/S TSEWANG ENTERPRISES
M/S R N ENTERPRISES
Sikha Traders
M/S YOGENDRA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .