WELCOME MAINTENANCE AND MISC B/R ITEMS AT AIR FORCE STATION JAIPUR

Amount

M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on walls all as specified & directed.

Description all as per item No 1 above but one coat of oil bound distemper on Ceiling.

Description all as per item No 1 above but one coat of oil bound distemper on walls.

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty including one coat of primer complete all as directed and specified.

M&L for complete removal of existing treatment from wall or similar surfaces applying 3 mm thick wall care putty on wall surfaces including one coat of primer and well rubbing for making smooth and uniform surface with sand paper then applying two coats of plastic emulsion paint in different patterns shade with rolling instrument including preparation of old decorative surfaces etc all as specified & directed.

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth all as specified & directed.

Description all as per item No 6 above but on steel surfaces.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously treated wood or wooden base surface over 10cm width or grith complete all as specified and directed.

Taking down cement plaster including racking out hacking for keys scrubing down with water including removal of debrises complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick works or concrete surfaces or similar surfaces of wall etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

S&F in repair 15mm bore galvanised steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed.

S&F in repair 15mm bore bib taps, fancy type brass chromium plated with crutch or battery handle screwed down, screwed for iron pipe or brass ferule complete all as specified and directed.

S&F in repair 15mm bore chromium plated swivel shower rose with or without swivel joints any size for fixing with 15 mm pipe including shower arm 15 mm size , 195 mm long with bend of 45 degree complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick ordinary quality sheet glass glazing with u-pin and oil putty n.exc 0.5 sqm each pane in square/ rectangle shape and size cutting and fixing including removing debrises from site etc complete all as specified and directed.

Taking down shutters of size exc 1.5 Sqm and not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge.

S&F factory made, 35 mm thick plain framed, panelled shutter (four panel) with lock rail using 2nd class H.W (Siras or any second class Hard wood as approved by GE ), kiln seasoned and chemically pressure treated, the size of rail and style as per IS:1003 (Part-I) and panel insert of 9mm thick BWP Phenol formaldehyde bonded commercial facing ply wood, complete all as specified and directed.

S&F for factory made glazed/ wire gauged/skeleton shutter, 35mm thick out of (well kiln seasoned) 2nd class hard wood (Siras or any second class Hard wood as approved by AGE (I), the size of rails and styles as per IS, chemically pressure treated in factory against termite infestation prepared to receive wire gauge or glass (without sash bars), edges of frame chamfered or rounded, fitted with cut and mitered beads, all as specified. Note: Wire gauge/glazing to be measured and paid separately).

S&F Factory made Solid PVC door frame of size 50 x 47 mm , made out of 5mm plain coloured PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and making good the disturbed surfaces with plastering in CM 1:6 and the rate quoted is inclusive this element, noting extra shall be paid on this account complete all as specified.

S&F 30mm thick factory made PVC solid panel PVC door, shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15 x15mmfor top & bottom rails, MS frame shall have a coat of red oxide primer of approved make and shall 'be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2)thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 30mm wide x 5mm thick PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' Channel using PVC solvent adhesive complete as per manufacture’s specifications & drawings, all as directed by Engineer-in-Charge.

S& F mild steel medium weight Butt Hinges 100mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminium anodised Tower Bolt 125mm long stove enamelled black with bright bolt complete all as specified and directed.

S&F Aluminium anodised sliding door bolt 250mm long, plate type, stove enamelled, black with bright bolt not less than 12mm dia, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified and directed.

S&F Aluminium anodised pressed handles, 125 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china wash hand basin size 450x300mm white flat back including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair Vitreous China squatting pan, of ‘Orissa pattern ‘ white of size 580 X 440 mm, with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding minimum 150 mm thick (1 lime, 2 sand or surkhi and 5 aggregate) complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern)' white EWC floor/wall hung type with PVC seat cover copmlete including connection to drain or outgoing pipe complete all as specified and directed.

S&F in repair PVC 10 ltrs, valveless, syphonic action type, flushing cistern, white, low level, with inlet, ball valve, float and handle, including 32 mm bore flush pipe brackets all as specified.

S&F in repair Rotational moulded polyethylene water storage tanks 2 layers of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair wash basin mixer brass chromium plated, fancy type, 15mm bore for mixing hot and cold water screwed down for iron pipe complete all as specified.

S&F in repairs concealed brass CP stop cock 15 mm screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe for union and fixed complete all as specified.

S & F in repairs 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed.

S & F in repairs Stop valves 15mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair curtain rail/rod of CP in wooden pattern finish of 18/19 mm with decorative end cap and brackets as complete all as specified and directed.

S&F in repairs galvanised steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples fixed including a coat of French blue paint complete all as specified and directed.

S&F in repair plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 900mmX 600mmX450mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

S&F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of length 140 mm complete all as specified and directed.

S&F in repair brass CP waste coupling (half or full threaded) of 100 mm size complete all as specified and directed.

S&F in repair brass CP waste coupling (half or full threaded) of 75 mm size complete all as specified and directed.

S&F 100 mm stainless steel grating approved make and quality grade 304 on top of floor trap complete all as specified and directed.

S&F in repair 15mm dia CP brass bib cocks long body with wall flanges including cutting and making good the walls wherever required complete all as specified and directed.

S&F in repair single lever 15 mm Basin mixer piller tap, cast copper alloy, with capston heads chromium plated screwed down high pressure with or without lettered `Hot' and `Cold' with long screwed shanks and fly nuts, complete all as specified and directed.

S&F in repair fancy type 15 mm Brass CP wall mixer formixing `hot` & `cold` water screwed down for iron pipe and fixed wall mixer Two in one with bend pipe complete all as specified and directed.

S&F in repair fancy type 15 mm concelaed stop cock complete all as specified and directed.

S&F in repair fancy type 15 mm wall mixer three in one for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair fancy type 15 mm sink mixer with swivel spout complete all as specified and directed.

S&F in repair fancy type single flow shower with shower arm 50 mm complete all as specified and directed.

S&F in repair fancy type fantasia health faucet for fixing 15mm dia pipe complete all as specified and directed.

S&F in repair fancy type 40mm dia waste coupling full threaded complete all as specified and directed.

S&F in repair fancy type towel rail 450mm long complete all as specified and directed.

S&F in repair fancy type stainless steel towel ring fixed with and including CP brass screwed and cleats complete all as specified and directed.

M&L in RCC Ceiling/Chajja/facia/stair repair up to height of 10 m from ground, applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster and applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete all as specified & directed surface preparaion etc complete all as specified & directed. Note: Measurment of Chajja, Facia will be done for one long side only.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic jointless tiles 7 to 8mm thick in floors, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm laid over & including screed bedding 15 mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

M&L for glazed coloured ceramic jointless tiles 300mmx200mmx7mm thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over & including 10 mm thick cement plaster in CM 1:4 all as specified & directed.

M&L for coloured printed non skid ceramic tiles 7 to 8 mm thich area of each tile exc 0.18 sqm but n.exc 0.38 sqm laid over & including screed bedding 15 mm thick in cement mortar 1:6 etc. set and jointed with neat cement slurry pointed with colour cement to match the floor complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types over and including 20mm thick screed bed in CM 1:4 including removal of old broken granite complete all as directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and directed.

M&L in repair for 19mm thick prelaminated particle board both side including necessary 2nd class hardwood 6mm thick edging for cup board all as specified & as directed.

S&F in repair 30 mm width of flap Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair peg set of 3, solid body of aluminium all as specified and as directed.

M.S. ENTERPRISES (BID ID -3311806)