SPECIAL REPAIR TO BUILDING NO P73 ADD ALTN IN SHAMSHER HALL GALVALUME SHEET IN NCOs MESS AND PROVN OF CONCERTINA COIL IN BOUNDARY WALL UNDER GE AF GORAKHPUR

Amount

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:6, all as specified and directed.

M&L for rendering 5 mm thick on ceiling surfaces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:3 as in ceiling, all as specified and directed.

M&L wall care putty Birla/ JK white 1 mm thick (to achieve smooth surface) for new plaster surface complete.

M&L Complete removal of existing treatment on wall surface and applying wall care putty JK/Birla white wall care putty 1 mm thick (to achieve smooth surface) complete all as specified and directed.

M&L for preparation of new wall surfaces and applying three coat white wash complete all as specified and directed.

M&L complete removal of existing treatment and washing rubbing down and stopping of painted surface and preparation of surfaces applying two coats of Acrylic smooth exterior paint of required shed new work (two or more coats applies i.e 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied i.e 2.20 Kg/10 Sqm complete all as specified and directed

M&L for preparation of surfaces of walls & applying three coat white wash on new ceiling surfaces complete all as specified and directed.

M&L complete removal of existing treatment and washing rubbing down and stopping of painted surface and preparation of surfaces applying two coat white wash on old ceiling surfaces complete. all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each. all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete. all as specified and directed.

M&L IInd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete. all as specified and directed.

M&L for MS work as in as in grills / Guard bars fillets for securing wire mesh and similar articles and hold fast, including demolition complete all as specified and directed.

M&L IInd class hard wood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc Conplete all as specified and directed at site

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete. all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 125 mm size all as specified and directed.

S&F 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete, all as specified and directed

S&F first class hardwood small fittings such as a bracket stopper not exc. 200 cucm each complete all as specified and directed.

S&F 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed. all as specified and directed.

Resecuring, cutting or easing incl adjusting without taking down shutters n. exc. 1 sqm complete all as specified and directed.

S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colur PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame with necessary SS fitting , all as specified and directed.

M&L for 150mm length of bolt of aluminium anodised barrel tower bolt complete all as specified and directed.

S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coat +tic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs 20 mm dia chrome finish stainless steel (grade S-304) curtain rails (minimam thickness 1.5 mm) including fixing with new brackets and doom corner glob complete all as specified and directed.

S&F stainless steel utensil plate rack of size 24x36x10 inch mm and fixing to wall with screws Make: Prayag Cat No P-336

S&F Three track aluminium window hanging style/meeting style/top bottom &lock rail section extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /Sheet glass 5.5 mm thick tinted glass with necessary fitting, C.P. brass / stainless steel screws, Polyester powder coated aluminium (minimum thickness of powder coating 50 micron and Stainless steel (Grade S-304) wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm all complete as per architectural drawings CE/ALD/TD-194 sheet no 1/2, 2/2 all as spfd and directions of Engineer-in-charge.

S&F Powder coating anodised aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coating anodised aluminium frame for shutter, windows, ventilators shutters, side hung type without sash bars, aluminim sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading, screws, stainless steel chrome finish fittings such as peg stays 150mm long (1 no.) hinges type B 21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Stainless steel (Grade S-304) wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4.0 mm thick tint glass for aluminium ventilators / window etc. complete, all as specified and directed

S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed.

S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with in square n.exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

M&L Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

M&L Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 100/110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.

Ditto all as per item No.46 above but 75mm bore. complete all as specified and directed.

S&F 100/110mm bore PVC (SWR) bends, of any radius provided without access door. complete all as specified and directed.

Ditto all as per item No.48 as above but 75mm bore. complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) 20 mm thickness in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including stone Chamfer, splays or arris in facework complete, all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and directed.

M&L Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic-coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 15 m thick for laying floor finishes in cement plaster 1:6, complete all as specified and directed.

ditto- above item as above but as in skirting including 10 mm rendering in CM 1:4 complete all as specified and directed.

S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

S&F in repairs 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white incl ball valve flat and handle incl brackets flush pipe of polyethylene low or high density of PVC 32 mm dia Make: Prayag all complete all as specified and directed.

M&L for PVC floor traps plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed.

S&F in repairs wash basins, vitreous China white size 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe and cp waste coupling complete all as specified and directed

S&F kitchen sinks without drainage board overall size 495 x 420 with bowl size 410mm x 330mm x 160mm, made of stainless steel 1mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board overall size 915 x 460 with bowl size 410mm x 330mm x 160mm, made of stainless steel 1mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.

S&F in repairs stop valve, 15 mm dia cast copper alloy, chromium plated with long shank and cup (angle type) screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repairs stop valve, 15 mm cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repairs fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs chromium plated towel rail 600 mm long complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size 125 mm incl fixing to steel pipe or union complete all as specified and directed.

S&F chromium plated wall mixer with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete all as specified and directed. Make - Jaguar, Code con 281KN

S&F chromium plated basin mixer with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete all as specified and directed. Make - Jaguar, Code CON-169KNB

S&F chromium plated sink mixer single lever with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete all as specified and directed. Make - Jaguar, Code FUS-29163

S&F fancy type, chromium plated bib taps with nozzle, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. Make - Jaguar, Code CON-049NKN

S&F fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete. Make - Jaguar, Code CON-107KN

S&F glass corner shelf with bracket chromium plated boundary fixed to wall with screws. complete all as specified and directed. Make- Jaguar, Code No- ACN-1173.

S&F chromium plated towel rack fixed with wall complete all as specified and directed. Make - jaguar, Code - ACN-1181FHS

S&F chromium plated shower roses size 120 mm dia round shape incl fixing to steel pipe or union complete all as specified and directed. Make-Jaguar, Code-OHS-1779

S&F chromium plated soap dish fixed to wall complete all as specified and directed. Make- Jaguar, Code -CAN 1131N

S&F chromium plated toilet paper holder fixed to wall with drilling screws complete all as specified and directed. Make - Jaguar, Code - ACN-1153N

S&F chromium plated hand fossit for pedestal pattern WC screwed down high pressure complete all as specified and directed. Make-Jaguar, Code-ALD CHR 583.

S&F chromium plated jet for pedestal pattern WC screwed down high pressure complete all as specified and directed.

S&F chromium plated fancy type angular stop cock 15mm dia complete all as specified and directed. Make - Jaguar, Code - CON 059 KN

Dismantling PVC water tanks exc. 250 but n. exc. 500 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylindrical vertical with closed top) rotational threaded tank cover hoisted and fixed in position complete all as specified and directed.

S&F in repairs gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete allas specified and directed.

S&F Ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs. complete all as specified and directed.

S&F MS work as in bands, steps, caging for water tank, fixing for rain water pipe etc; complete all as specified and directed.

Demolition of brickwork built in any type of mortar, complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for Brick work with Sub Class 'B' brick straight or curved on plan to any radius in half brick thick wall built in cm 1 :4 complete all as specified and directed

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves including necessary form work complete, all as specified and directed

M&L Formwork to sides and soffits of floor lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

S&F Mirror Cabinet size 330x430 mm and fixing to wall with screws Make: Prayag Cat No 551

1. S&F 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/ adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and directed by the Engineer-in-Charge.Note:- (i) Modular kitchen accessories i.e. basket cutlery baskets fillings handles hinges will be measured and paid for separately as supply only under respective of this schedule (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug / dash through fastener type) (iii) Fabrication and installation of cabinet to be carried out by authorized vendor of manufacturer only.

S&F 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/ drawer shutter / CB shutter fixed with screws, solvent cement/ adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note: - (i) Handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug / dash through fastener (hammer type) (iii) Colour and design of prelaminated portion shall be as approved by GE (iv) Fabrication and installation of cabinet be carried out by authorized vender of manufacturer only.

S&F 12mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of one side plain white colour rigid am glossy finish fixed with screws, solvent cement / adhesive as per manufacturer instruction to make kitchen cabinet back complete as per specifications and as directed by the Engineer-in-Charge Note:- (i) Modular kitchen accessories i.e. basket cutlery baskets, fittings, handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug / dash through fastener (hammer type) (iii) Fabrication and installation of cabinet to be carried out by authorized vendor or manufacturer only.

Supply only stainless-steel chromium plated (Grade S-304) plain basket of minimum size 50cm x 37cmx 20cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cmx 16cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) partition basket (11-13 division) of minimum size 50cm x 37cmx 16cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) cutlery basket of minimum size 50cm x 37cmx 10cm made of 4mm minimum dia S.S wire and bottom of SS perforated sheet approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) plain basket of minimum size 50cm x 37cmx 16cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) bottle pullout of minimum size 50cm x 40cmx 16cm in two tiers made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board.

Supply only stainless-steel chromium plated (Grade S-304) plain basket of minimum size 50cm x 52cmx 16cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board complete all as specified and directed.

Supply only stainless-steel chromium plated (Grade S-304) grid basket(plain) of minimum size 50cm x 52cmx20cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board complete all as specified and directed.

Supply only auto closing hydraulic (soft closing) chrome finish stainless hinge openable at 110 degrees complete all as specified and directed.

Supply only 100 mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish, complete all as specified and directed.

Supply only 200mm long stainless (grade S-304) handle fancy type polished bright chrome finish, complete all as specified and directed.

Supply only stainless-steel chrome plated (Grade S-304) plain basket of minimum size 50cm x 37cmx 10cm made of 4mm minimum dia S.S wire approved quality with and including stainless steel chrome finish (Grade S-304) ball bearing telescope channel (full extension mechanism) (two number) for fixing to board complete all as specified and directed.

S&F framed truss fabricated with 50X50X3mm square tubes, in trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, teel, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-00 (Grade E-250 Quality A) complete all as specified and directed.

M&L for 18mm thick non asbestos fiber cement building boards fixed or laid/ inserted to timber/GI/Aluminum framework with screws. complete all as specified and directed.

M&L for boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for homogeneous Linoleum, plain coloured sheet, including stretching, cutting and fitting, laid with approved rubber-based adhesive in floors complete as per IS specifications and as directed.

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self-tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self-tapping screws as specified.

Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F Anodized aluminium snap grid frame work for false ceiling all as specified (Size of grid 605 x 605mm).

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions complete all as specified and directed.

Ditto, But Except board complete all as specified and directed

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F 25mm thick 2nd class Hardwood Boarding, with nails in any situation (except flooring and skirting), clean sawn with butt joint planed both sides.

Fixing only 25mm thick 2nd class Hardwood Boarding wrought on one or both sides, with nails in any situation (except flooring and skirting).

Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified as directed.

Preparation of old plaster surfaces of wall, Washing rubbing down and stopping of painted surfaces and applying a coats of cement base paint complete all as specified as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified as directed.

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint over 10cm in width or girth, not otherwise described complete.

M&L anodised aluminium frame with grill Weight exc. 2.50 Kg and not exc. 3.5 Kg per Sqm with all fittings and fixture complete all as specified and directed.

S&F in repairs aluminium ( Die cast ) body door closer hydraclically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and. complete all as specified and as directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Demolition of RCC (Reinforced cement concrete) etc complete all as specified and directed at site.

M&L for RCC 1:2:4 type B1 nominal mixed concrete as in coping with use and waste of form work Complete all as specified

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plates, etc (cut to ordinary lengths i.e within 20 mm of the length indicated) including cutting, riveting, drilling etc Fe-290 (Gde E-165) Complete all as specified

S&F 610 mm dia punched tap concertina coil (Effective dia 550 mm at strength length of coil 6.0 mtr ) with two handle and spike at both end of coil dovetail clips (18 SWG) including razor wire 07 nos, 6.00 mtr length of each wire medium size barbed length 20 mm width 14 mm including 51 pin, 128 Nos clips in each coil including 230 gm/sqm zinc coting on core wire complete all as specified.

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for concealed point wiring for one light / fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes 1 to 4 way and wiring to be terminated in pressed steel sunken boxes with and including all accessories and top cover and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.(a) one light point controlled by one 6 amp one way switch complete all as specified.Note:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface (ii) Switches, socket outlet, call bell, bell push and fan regulators shall be measured ad paid separately

All as per item No. 139 above but for one ceiling fan, exhaust fan point controlled by one 6 Amps switch on same board.

All as per item No. 139 above but for one 3 pin 6 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 139 above but 3 pin 6-amp socket point on the same board with other switches complete.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including nonmetallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

All as per item No.143 above but with 4 Sqmm cable for 16 Amp switch socket outlet point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earth continuity conductor complete all as specified and directed at site.

S&F switch piano, flush type 5/6-amp, single pole, one way 230-volt AC Circuit complete all as specified and directed

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F recess mounting LED luminaire of size 2'x2’ white 34 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.Make: - Havells Cat part No. PLANO2X2PLR34WLED840S or equivalent of approved make

S&F exhaust fan (air freshener) single phase 230/240-volt AC 300mm sweep with louvers, plastic body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolators, complete all as specified and as directed.Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F modular switch 1 way 6 Amp complete all as specified and directed

S&F switch 1 way 16 Amp complete all as specified and directed

S&F socket outlet 6Amp 2/3 pin complete all as specified and directed

S&F socket outlet 16 Amp 2/3 pin complete all as specified and directed

Supply & fixing LED tube light with fitting and fixtures 18/20 watt (4ft), 240 volts complete all as specified and directed

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F in repairs MCB, SP, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. (for geyser) Make: - Hager/Legrand/Merlin Gerin

Supply, installation commissioning and testing of water hater storage type of capacity 25-liter, electric supplied BEE- 5-star rating including all fixing arrangement complete all as specified and directed

M/S SHAILZA TRADERS

M/S B.P. CONSTRUCTION

R.S Enterprises

sri krishna construction

M/s Deeksha Construction electrical & Refrigeration & works

M/s Comfort Air Conditioning and Refrigeration Engineers