Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8.0 L
EMD Value
₹80,000
Closing Date
28 Nov 2026, 12:00 pm6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE PD PWD SAMBHAL
EE PD PWD SAMBHAL
Year 2026-27 Under road sefety work Short-term improvement work on Dhanari Bhirawti road (ODR)
2026_CEMBD_1211201_5
4383/E-Nivida/26-27 DT 12-11-2026
Open Tender
Civil Works - Others
Percentage
60 days
SAMBHAL
Please refer Tender documents.
2 documents required · 2 mandatory
₹766
₹80,000
Yes
21 Nov 2026
21 Nov 2026
28 Nov 2026
21 Nov 2026
28 Nov 2026
21 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 190 | sqm | 15 | ₹2,850 |
| 2 | Providing and laying dense graded bituminous macadam grade-II with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 8 | cum | 13,800 | ₹1,10,400 |
| 3 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 4 | cum | 15,800 | ₹63,200 |
| 4 | Providing and laying of Hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beeds as per IRC 35 the finished surface to be hard uniform and free from streaks and heats (Ch No 27) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 140 | sqm | 580 | ₹81,200 |
| 5 | Provinding and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 5 mm is exclusive applied glass beads as per IRC 35 The Finished surface to level , uniform and free from streak and holes (For Repeated Bar) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 50 | sqm | 1,150 | ₹57,500 |
| 6 | Retro-reflactrorised Traffic sign as per IRC67-2012 Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 years outdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender. Morth 801 (8.4) iv) 80mmx60mm rectangular with deffinatitation plate(20cmx60cm) Sign Board and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | - | - | - | - |
| 7 | ii) 60 cm equilateral tringle with diffinitation plate (20cm X 60cm) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 24 | Nos | 3,200 | ₹76,800 |
| 8 | iii) 60 cm Circular with diffinitation plate (20cm x 60cm).and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 7 | Nos | 3,600 | ₹25,200 |
| 9 | vi) 80 mm x 60 mm rectangular with diffinitation plate (20cm x 60cm) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 7 | Nos | 4,400 | ₹30,800 |
| 10 | Supplying and fixing of single mould twin shank reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate/ABS moulded body conform to ASTM D4280 & MoRTH Section 800. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive recommended by the manufacturer. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The length of the road stud shall be 100 mm, width shall be 90 mm and the height of the road stud shall not exceed 20 mm. The base of the marker shall be flat within 1.3 mm as per MORTH Section 800. The road stud shall support a load of 13635 Kg tested in accordance with ASTM D4280. The road stud shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Road stud lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sq.cm. The slope or retro – reflectory surface shall be 35 +/- 5 degree to base. The raised pavement marker shall be make in India and shall be tested for abrassion resistance from government lab and report shall be uploaded along with tender. If somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The product should accompany two year replacement warranty for satisfactory field performance from the manufacturer. (With Shank) as per SOR Ch-26 item no.-5 and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T. | 94 | Nos | 310 | ₹29,140 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.05 MB
Tendernotice_2.pdf
PDF • 6.51 MB
BOQ_2301771.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .