maintenance and repair work of the Corporation Park in DJ Nagar at Ward No 52 East zone

Amount

Cleaning the light jungle etc completed as per direction of officers

Painting two coats for Exterior surfacewith approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.404)

Painting two coats with Ready Mixed Enamel Paint over thenew iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (Sl.No.368 )

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

S/fixing of swing two seater with bit of 8'-0" above GL using 50mm dia ms pipe 9swg with 3.65mm on wall thick with one coat of primer and to coats of enamel paint and seat using with paddale wood with polishing

S/fixing of slide ladder park model using 16g MS sheet for sliding 8'-0" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc

S/fixing of jungle jim pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick running three horizontally and vertically on each side finishing one coat of primer and two coat of enamel paint of approved colour aa per instruction of departmental officers

S/F of twin sea saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1" paddale wood with polish as per direction of departmental officers.

Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seat approved by the Executive engineer before use on work.

Supply and fixing of Park benches including moulding charges etc complete

Add :- GST @ 18%

ADHAV BUILDERSS (BID ID -1542919)