Renewal of Service Road From Km 31.200 to 37.700 L/Bank of Mat Branch Feeder

Earth work in embankment by power transported earth with a lead beyond 200m. and upto 1.00 Km. including excavation, loading, unloading, manual compaction, dressing and all lifts with all cost of labour T&P etc.complete.

Providing, laying, Spreading and compacting machine crushed stone ballast of approved Quarry of 63-45 mm size to WBM of G-2 specification including spreading in uniform thickness, hand packing, rolling with power roller 8 - 10 tones in stages to proper grade and camber applying and brooming with crushable screening material i,e stone dust to fill-up the interstices of coarse aggregate, watering and compacting to the required density including cost of all materials, T&P etc.complete as per MORD specification no 405 .

Providing, laying, Spreading and compacting machine crushed stone ballast of approved Quarry of 53-22.4 mm size to WBM of G-3 specification including spreading in uniform thickness, hand packing, rolling with power roller 8 - 10 tones in stages to proper grade and camber applying and brooming with crushable screening material i,e stone dust to fill-up the interstices of coarse aggregate, watering and compacting to the required density including cost of all materials, T&P etc. completeas per MORD specification no 405 .

Providing and applying prime coat with Bitumen emulsion on prepared surface of granular base including cleaning of road surface etc and spraying primer at the rate of 0.75/Sqm. using mechnical means as per Technical Specification. Clause 502, S.L.-5.10, of MORD specification.with all cost of material, T&P etc.complete.

Providing and applying Tack coat with Bitminous VG-10 using bitumen distributor at the rate of 0.35 Kg. per Sqm. on the prepared granular surface cleaned with Hydraulic broom as per Technical Specification. Clause 503, of MORD specification including cost of Bitumen as per direction of engineer -in-charge.with all cost of material, T&P etc.complete.

Providing,laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm. to 5.60 mm. aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN. static roller capacity, finished to required level and grades to be Seal coat as per Technical Specification. Clause 508, of MORD specification including cost of Bitumen as per direction of engineer -in-charge with all cost of material, T&P etc.complete.

Providing,laying seal coat sealing the voids in a bitumenious surface laid to the specified levels, grade and cross fall using Type 'C' as per Technical Specification. Clause 510, of MORD specification including cost of Bitumen as per direction of engineer -in-charge.with all cost of material, T&P etc.complete.

Road Marking with hot Applied Thermoplastic Compound with Reflectrorising Glass Beads on Bituminous Surface. Providing and laying of hot applied Thermoplastic Compound 2.5mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC: 35-2015 The finished surface to be level, uniform and free from streaks and holes.with all cost of material, T&P etc.complete.

Brick edging on both side of the road of M-150 bricks 8cm. (3´´) wide and 12cm (4½´´) deep laid with mud mortar including all labours and supply of brick finished to required template & ramming the excavated earth as directed by the Engineer-In-Charge. with all cost of material, T&P etc.complete.