Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹9.7 Laccepted-aoc | ₹9.7 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹12,200
Closing Date
4 May 2026, 9:30 pmClosed
Visvesvaraya Technological University
Assistant Engineer
08312498181
9731162848
Providing and Laying UG Cable and mini High Mast Light to Basket Ball & Volleyball court at UBDT college of Engineering Davangere (Exclusively for Schedule Tribe category) (2nd Call)
VTU/2025-26/EL/WORK_INDENT197/CALL-2
VTU/2025-26/EL/WORK_INDENT197/CALL-2
Reserved
Electrical
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
11 documents required · 11 mandatory
Mandating satisfactorily completing as a prime contractor for at least one similar nature of work to an extent of 25% of the cost of the work of Rs. 2.43 Lakhs
Achieved in at least one financial years a minimum financial turnover of Rs. 9.74 Lakhs.
Class IV & above Registration certificate
Reservation Certificate must be upload (Scheduled Tribe)
IT returns with balance sheets for the last five years have to be submitted.
PAN Card copy
GST Registration certificate
ESI and EPF certificate to be uploaded
All other documents as mentioned in Tender document
Assessed available tender capacity
₹500
₹12,200
4 May 2026
26 Apr 2026
6 May 2026
3 May 2026
Providing and Laying UG Cable and mini High Mast Light to Basket Ball & Volleyball court at UBDT college of Engineering Davangere (Exclusively for Schedule Tribe category)
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation or Substructure or Superstructure complete as per Drawing and Technical Specifications.
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. / Single Arm Bracket with 1500 mm St...
Double Arm Bracket with 1500 mm Standard 40/50 mm dia
Supplying and fixing of hot dip Galvanized foundation 20mm size bolt and nuts with suitable size double washers
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards an...
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
Supplying and laying double walled corrugated (DWC) HDPE pipe including all necessary connecting sockets/couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II sui...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sq m...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf LT Cable 2.5 to 25 Sqmm
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole or wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
Fabricating supplying and mounting MS box made out 16SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63A
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capaci...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nutsand washers etc) 3-120sec setting.
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 50 x 50...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Document.pdf
Tender Document • 13.93 MB
Drawings.pdf
Others - Drawings • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].