The work of Conversion of left out ward no 1 La Marvel Donapaula of C C P under the jurisdiction of sub division IV Taleigao Goa under the Tribal Area Sub Plan Scheme.

LT DISRIBUTION SYSTEM

1.1 KV, LT, XLPE cables & service cable

Supply of 1.1KV, 3½ core, 120sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Supply of 1.1KV, 3½ core, 300sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Supply of 3½ core, 25sq.mm, stranded Aluminium conductor, PVC insulated 1.1KV grade' armoured power cable and carrying ISI MARK

Supply of 4 core,16sq.mm, stranded Aluminium conductor, PVC insulated, 1.1KV grade armoured power cable and carrying ISI MARK

L.T.DISTRIBUTION PILLAR

Supply of 6-way, TP&N, 3 phase, 415V, 2 nos. of 315Amps incomings and 6nos.of 200Amps outgoing rating type suitable for outdoor installation, made out of CRCA sheet with PU painted complete with all accsesories and HDGI mounting channels(6 way feeder pillar)

Supply of 4-way, TP&N, 3 phase, 415V, 2 nos. of 315Amps incomings and 4nos.of 200Amps outgoing rating type suitable for outdoor installation, made out of CRCA sheet with PU painted complete with all accsesories and HDGI mounting channels

Supply of 3 phase, 415V, 2nos of 200Amps incoming 3Phase and N, 415V 200A MCCBs outgoing, 12 Nos. 32Amps SP, MCBs, 12 Nos.16 Amps SP, MCBs Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet with PU painted complete with all accesories and HDGI mounting channels (Note : considered 24 way SP MCBs)

STREET LIGHT LLUMINATION

Supply of of LED Streetlight fixtures of 50watts

Supply of HDGI 8.0mts long Octagonal tapered poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make Bajaj Electricals Ltd, Transrail, Hakke Industries Pvt. Ltd and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO. b. Base Plate steel of size 225x225 m, thichness 16mm confirming to IS226/IS2062. c. 1.5mts long single brackets HDGI, 3,25mm thick for mounting the fixture of outer diameter 40mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65 for cable entry and exit (2runs). e. Door opening of approx length 500mm at a elevation of 500mm from the base plate.

Supply of set of 4 nos J type M20 (UNF Thread- 100m) foundation bolts of grade EN 8 & ISI1367 of suitable length for 8mtr pole.

STREET LIGHT CABLES AND PILLARS

Supply of Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN MCCB, TPN MCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete.

Supply of Cable route Markers (for entire route length) as per NIT drawing

Supply of RCC Hume Pipe, 100mm dia with required no. of collars, for road crossing.

Erection, Testing & Commissiong ( Schedule I)

LT DISRIBUTION SYSTEM

1.1 KV, LT, XLPE cables & service cable

Erection, Testing & Commissiong of 1.1KV, 3½ core, 120sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Erection, Testing & Commissiong of 1.1KV, 3½ core, 300sq.mm, stranded Aluminium conductor, XLPE insulated, armoured power Cable and carrying ISI MARK (from the Feeder Pillar to Service Pillar)

Erection, Testing & Commissiong of 3½ core, 25sq.mm, stranded Aluminium conductor, PVC insulated 1.1KV grade' armoured power cable and carrying ISI MARK

Erection, Testing & Commissiong of 4 core,16sq.mm, stranded Aluminium conductor, PVC insulated, 1.1KV grade armoured power cable and carrying ISI MARK

L.T.DISTRIBUTION PILLAR

Erection, Testing & Commissiong of 6-way, TP&N, 3 phase, 415V, 2 nos. of 315Amps incomings and 6nos.of 200Amps outgoing rating type suitable for outdoor installation, made out of CRCA sheet with PU painted complete with all accsesories and HDGI mounting channels(6 way feeder pillar)

Erection, Testing & Commissiong of 4-way, TP&N, 3 phase, 415V, 2 nos. of 315Amps incomings and 4nos.of 200Amps outgoing rating type suitable for outdoor installation, made out of CRCA sheet with PU painted complete with all accsesories and HDGI mounting channels

Erection, Testing & Commissiong of 3 phase, 415V, 2nos of 200Amps incoming 3Phase and N, 415V 200A MCCBs outgoing, 12 Nos. 32Amps SP, MCBs, 12 Nos.16 Amps SP, MCBs Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet with PU painted complete with all accesories and HDGI mounting channels (Note : considered 24 way SP MCBs)

STREET LIGHT LLUMINATION

Erection, Testing & Commissiong of LED Streetlight fixtures of 50watts

Erection, Testing & Commissiong of HDGI 8.0mts long Octagonal tapered poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make Bajaj Electricals Ltd, Transrail, Hakke Industries Pvt. Ltd and Utkarsh India Pvt. Ltd. a. Hot rolled stud plate confirming to grade S355JO. b. Base Plate steel of size 225x225 m, thichness 16mm confirming to IS226/IS2062. c. 1.5mts long single brackets HDGI, 3,25mm thick for mounting the fixture of outer diameter 40mm. d. 50mm dia HDPE pipe, PN-4, P-63 Grade 2.65 for cable entry and exit (2runs). e. Door opening of approx length 500mm at a elevation of 500mm from the base plate.

Erection & Testing of set of 4 nos J type M20 (UNF Thread- 100m) foundation bolts of grade EN 8 & ISI1367 of suitable length for 8mtr pole.

STREET LIGHT CABLES AND PILLARS

Erection, Testing & Commissiong of Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN MCCB, TPN MCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete.

Erection of Cable route Markers (for entire route length) as per NIT drawing

Laying of RCC Hume Pipe, 100mm dia with required no. of collars, for road crossing.

Supply of Material Schedule II

LAYING of HT/LT CABLES by OPEN TRENCHING METHOD

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain( not exceeding 1.5 mt in width or 10 sq.m on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposl of surplus excavated soil as directed within a lead of 50 m(a) for laying of HT/ LT cables of various sizes including excavation for equipment foundation

Refilling the foundations, trenches, plinth sides, foundation etc. with avialable excavated earth in layers not exceeding 20 cm depth, cosolidating each layer by ramming and watering lead upto. 50 M and all lifts and disposal of surplus earth in cable trenches and foundations of poles and equipments.

Supply of fine river sand of approved quality (except in sandy soil) for cushioning of HT/LT underground cables laid by conventional Open Trenching Method.

Providing of cement concrete 1:3:6( 1 cement; 3 coarse sand; 6 graded granitic or basaltic stone aggregate.) for foundations of A) SERIVE PILLAR

Providing of Underground cable protective cover as per specs. The concrete slab shall be machine made using semi dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-press" machine with a high vibration frequency and hydraulic presuure of 40 MT, the size of the slab shall be 480mm*250mm*50mm and the concrete grade shall be M30 Adhring to IS 456l:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested.

Providing of Centering and shuttering including struttings, propping etc. and removal of formwork for a) Foundations, footings, bases of columns and mass concrete for

EARTHING

Supply of GI Flat 25 X 5 mm

Supply of G.I. earthing pipe, 2500mm long, 40mm nominal dia, class B, perforated. The pit shall be filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand /soil. The work includes excavation, backfilling & spreading of excavated surplace earth evenly. for 1) DISTRIBUTION FEEDER PILLAR 2) SERVICE PILLAR 3) STREETLIGHT PILLAR.4) STREETLIGHT POLES

Erection, Testing & Commissiong Schedule I

LAYING of HT/LT CABLES by OPEN TRENCHING METHOD

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain( not exceeding 1.5 mt in width or 10 sq.m on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposl of surplus excavated soil as directed within a lead of 50 m(a) for laying of HT/ LT cables of various sizes including excavation for equipment foundation

Refilling the foundations, trenches, plinth sides, foundation etc. with avialable excavated earth in layers not exceeding 20 cm depth, cosolidating each layer by ramming and watering lead upto. 50 M and all lifts and disposal of surplus earth in cable trenches and foundations of poles and equipments.

Laying of fine river sand of approved quality (except in sandy soil) for cushioning of HT/LT underground cables laid by conventional Open Trenching Method.

Laying of cement concrete 1:3:6( 1 cement; 3 coarse sand; 6 graded granitic or basaltic stone aggregate.) for foundations of A) SERIVE PILLAR

Laying of Underground cable protective cover as per specs. The concrete slab shall be machine made using semi dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-press" machine with a high vibration frequency and hydraulic presuure of 40 MT, the size of the slab shall be 480mm*250mm*50mm and the concrete grade shall be M30 Adhring to IS 456l:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strength) when tested.

Laying of Centering and shuttering including struttings, propping etc. and removal of formwork for a) Foundations, footings, bases of columns and mass concrete for

EARTHING

Erection & Testing of of GI Flat 25 X 5 mm

Erection & Testing of G.I. earthing pipe, 2500mm long, 40mm nominal dia, class B, perforated. The pit shall be filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand /soil. The work includes excavation, backfilling & spreading of excavated surplace earth evenly. for 1) DISTRIBUTION FEEDER PILLAR 2) SERVICE PILLAR 3) STREETLIGHT PILLAR.4) STREETLIGHT POLES

Schedule III Dismentalling of existing LT overhead conductor.

Removal of RCC pole 7.5 mtrs

Removing of LT 4 pin cross arm

Removing of LT 2 pin cross arm

LT Pin insulator

GI Pin for LT Pin insulator

LT shackle insulator

Metal parts for LT shackle insulator

Removal of stay rod with plate

Removal of Turn bukle with eye bolt 11KV

Removal of stay wire 7/10 SWG

AAC GNAT Conductor