Design, Supply, Installation, Testing, Commissioning and Three years Manning, Maintenance of Pressurised Water Yard Hydrant System (PWYHS) inclusive of Automatic Sprinkler System at Administration Building at JNPT

Amount

Fire Pump House Requirements for Hydrants System :-

Pump House Equipment

SITC of Electric Motor driven Fire Pump set of 2400 LPM @70 m head with a) pump with bronze impellar, b)motor, c) coupling, d) base plate, e) foundation bolts matching flanges with gasket and fastners with all complete.

SITC of Electric Motor drive Jockey fire pump set of 280LPM @70 mtrs head with a) pump with bronze impellar, b) motor, c) base plate, d) foundation bolts, e) mating flanges with gasket and fastners with all complete.

Electric driven Booster Pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal and floor of 900 lpm @ 35M conforming to IS: 5120. Suitable HP, SQ cage induction motor suitable for operation on 415 volts,

SITC of Electric Motor Starter Control Panel, Compartmentalised Floor mounted type, as per TAC requirement, for the Auto / Manual Operations of the above 2 Pump sets alongwith the Power & Control Cabling, from the Pump set Drives to Control Panel (each 8.0 M. length Max) with Earthing & Inter-locking, having, MCCB Switches, Meters, Fuses,Audio / Visual Alarms and Indicating Lamps, with Direct-On-Line Starters for Jokey Pump set & star delta operation for main pump Drives of Hydrant System,with Sequential Operation Circuitries.

Instrumentation

SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2.

SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete

Suction & Delivery Piping, Fitting & Valves

SITC of GI ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threded rods, fastners.

200 mm NB Class " C "

150 mm NB Class " C "

100mm NB 'C' Class

80mm NB 'C' Class

65mm NB 'C' Class

50mm NB 'C' Class

25mm NB 'C' Class

SITC of double flanged wafer type lever operated / wheel operated butterfly valve of 200 psi rating including matching flanges, bolts/studs, nuts, washers & gaskets.

SITC of Non Return Valves with Matching Flanges, bronze internal,EPDM seat, 200 psi rating, suitable horizontal & vertical installtion.

SITC of Air Vessel Tank 300 NB x 1.2 mtrs.

SITC of Ball Valve

SITC of 150 NB Fourway Fire Brigade Inlet Connection having inbuilt non.return valve with 04 nos of 63 mm SS instantaneaous inlets for fire water tank.

SITC of 25 NB Air Realease Valve

Structural Steel Support

Cabling from motor to Starter with copper earthing Strip within the pumphouse

S/I/T/C of Water Storage Tank of Capacity 25,000.00 Ltrs./or 80,000.00 Ltrs.total aggregate capacity will be 150,000.00 Ltrs

TOTAL OF 1

Hydrant System

SITC of GI ERW Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS rating with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec

150mm NB 'C' Class

100mm NB 'C' Class

80mm NB 'C' Class

SITC of GI ERW Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS rating & Aboveground Pipe Protection (Painting)and all required 'supports etc.

150mm NB 'C' Class

100mm NB 'C' Class

80mm NB 'C' Class

SITC of double flanged wafer type lever operated / wheel operated butterfly valve of 200 psi rating including matching flanges, bolts/studs, nuts, washers & gaskets.

SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs,nuts,washers,gaskets.

External

Internal

SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe.

External

Internal

SITC of 63mm dia stainless steel universal branch pipe as per IS 2871

SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end.

15m Long

SITC of GM air release valve .

SITC of swinging type M .S. Hose Reel drum of red powerd coated finish with 30 mtrs x 25mm Dia rubber hose as per IS 884.

SITC of Ball Valve 25NB

SITC of 150NB Four way Siamese Connection for hydant network with 4 nos. of 63 mm instantaneaous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings,nut,bolts & washers.

SITC of RCC hume pipe NP3 class (300 mm dia) with collar & joining material for road crossing

Structural Steel Support

TOTAL OF 2

SPRINKLER SYSTEM

SITC of Standard response Pendent type Brass sprinklers with Nickel chrome plated finish- K 80, T- 68 deg.c, 15mm end connection

SITC of Standard response Upright type Brass sprinklers with Nickel chrome plated finish- K 80, T- 68 deg.c, 15mm end connection

SS Flexible Drop 1500mm/1200mm Length

SITC of GI ERW Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS rating & Aboveground Pipe Protection (Painting)and all required 'supports

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB 'C' Class

50 mm NB 'C' Class

40 mm NB 'C' Class

32 mm NB 'C' Class

25 mm NB 'C' Class

SITC of Cast Iron Wet Alarm Control valve, internally and externally painted, pre-trimmed with bi-pass connection, test and drain connection, tested to 1.5 times the working pressure, with pressure gauge, water motor gong, including matching flanges, bolts/studs, nuts, washers & gaskets of 150 mm.

SITC of double flanged wafer type lever operated / wheel operated butterfly valve of 200 psi rating including matching flanges, bolts/studs, nuts, washers & gaskets. 150 mm

SITC of Water flow switch of 150 mm

TOTAL OF 3

FIRE EXTINGUISHER VENDOR TO WORKOUT QUANTITIES

5.0 Capacity Clean Agent Fire Extinguishers with stand

CO2 fire extinguishers 4.5 kg

Fire Buckets Set ( 04 Buckets in one set )

Safety Signages for staircase and evacuation

TOTAL of 4

Dismantling and Re-Erection of Existing Pump i.e. Diesel Pump, with Diesel Tank Fuel Piping, Main Pump and Jockey Pump along with accessories and Cabling, and Electrical control Panel

Construction of Pump House for housing for Main Pump 2 Nos. Diesel Pump 1 No. Jockey Pump 2 Nos. Air Vessel tank 1 No. Space for seating of 6 nos. Staff, made out of galvalume sheet as per following details : i) Purpose : for housing Pumps ii) Material of construction : Galvalume sheet iii) Size of enclosure : 10 m X 7 m X 8 m height iv) Type : Double skin outer crrugated & inner flat v) Sheet thickness : 0.8 mm 'vi) Insulation material : PUF vii) Insulation thickness : Flat portion 30 to 40 mm minimum viii) PUF density : 40 Kg/cm3 'The pump house costruction shall be as per following details : a) For pump house proper foundation/supporting arrangement shall be made for appropriate depth to take care of loading of pump house. b) Proper soling by consolidation of soil, ramming, graded soil aggregate of various sizes below 100 mm, filing of voids with chips 6 mm to 20 mm stone finishing. The thickness for soiling shall be minimum 100 mm oe as required as per site condition & as directed by EIC. c) All four walls and ceiling shall be made out of 0.8 mm thick galvalume sheet. The outer skin of galvalume sheet shall be preferably corrugated and inner sheet shall be flat. In between these 2 sheets of 40 mm thick PUF insulation shall be sandwiched and the thickness of inter & outer skin shall be 0.8 mm (22 gauge). d) The foundation for sprinkler main pump and jockey pump shall be made out of 1:4:8 PCC and shall be measured and paid separately as per item no. 18 of Part-A. e) 1 No. of door fabricated out of MS powder coated of appropriate size 1800 X 2100 mm shall be provided as per the details given in the drawing. Alternatively after award of work order contractor has to submit detail drawing for department approval. f) In the proposed pumphouse necessary cutouts will be made in the galvalume sheet to facilitate entry/exit of pipes. g) 6 Nos. of LED lighting fixtures of 20 W each along with power point switch and wiring is to be provided. h) 450 mm dia (2 Nos.) of wall mounted propeller exhaust air fans shall be provided in pump house. It shall be complete with fixed aluminium louvers along with gravity damper and SS bird screen. Electrical wiring, casing capping, distribution board and ON/OFF switch shall be inclusive of this item. i) Necessary MS structure shall be fabricated for supporting galvalume sheet. j) The supporting system of galvalume panels shall be fabricated out of ISMC channel section box section / angle. The MS members shall be painted with one coat of red oxidized prime folloed by two coats anamel paint of colour

Civil Work

a. Excavation in Soft Soil

b) Excavation in Soft soil

c ) Excavtion in Hard rock

PCC 1: 4 : 8 for Above Ground Pipe Support with " U " Clamp

Providing and laying Design-Mix Reinforced Cement Concrete foundation for various pumps of M-20 by weight batching using graded stone aggregate of 20 mm maximum size including mechanical mixing and vibration, consolidation, finishing, curing etc. as specified and also including dewatering, if any, cost of form work, shuttering & steel reinforcement, including nozing all around by 50 x 50 x 5 mm angle.

Labour and Transport

Packing and Forwarding

Transit Insurance

Comprehensive Insurance

Total before Tax

Description of Work / Item(s)

Amount

Design, Installation, Testing, Commissioning of Pressurised Water Yard Hydrant System (PWYHS) inclusive of Automatic Sprinkler System at Administration Building at JNPT.”

Transportation & Labour charges

Description of Work / Item(s)

Amount

Manning for operation and complete technical management of PWYHS, APADS and Sprinkler system at JNPT Administration Building for period of 3 years ( 7 No Fireman , 1 Electrician cum pump operator and 1 System Administration cum supervisor )

Total Part C

Grand Total (A + B + C) (Inclusive of Tax)

Digicon Engineers India Private Limited

Prudent Controls P Ltd

Shandar Interior Pvt. Ltd.

Reliance Fire Protection Sytems

Sai Industries

Prudent Controls P Ltd

Digicon Engineers India Private Limited

Reliance Fire Protection Sytems

Prudent Controls P Ltd

Digicon Engineers India Private Limited

Reliance Fire Protection Sytems

Sai Industries