REPAIR TO STEEL WOODEN AND TRADE PATTERN FURNITURES OF OTM AND MD ACCN AT PARADIP

Amount

Repairs to "Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 ) by replacing following parts as shown in drawing :-

Top made of teak wood finish 18 mm thick prelaminated particle board of size (1200 X 600) mm top including well polished 4 mm thick teak wood beading all round the top of table

Only drawer box (Excluding drawers) of over all size (350 X 430 X 570 mm) with central locking system as per drawing made of MS sheet of 20 gauge

All as per Item No. 1.02 above but of a single drawer made of MS sheet of 20 gauge

Stainless Steel Lock of 06 lever for Table drawers

All as per item Sl No 1.01 but 25 sqmm PVC Leg cap/ Shoe

Repairs to "Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 ) as shown in drawing

Top made of teak wood finish 18 mm thick prelaminated particle board of size (1500 X 900) mm top including well polished 4 mm thick teak wood beading all round the top of table

All as per Item No.2.01 above but of a single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge.

All as per item serial no 2.01 but new Mild Steel Lock of 06 lever

All as per item Sl No 2.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 25 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap.

Repairs to " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17) & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for removing of old unserviceable top then supply and fixing of Exterior Grade Teak wood finish 18 mm thick prelaminated particle board of size (400X700) mm top including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-.

S&F Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 20 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap.

Repairs to " Almirah Steel Large with shelves (Drg No FD-1031)" & replacement of following components as shown on drg complete all as specified and directed Eng-in-Charge :-

Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of a coat of red oxide primer and one coat of spray painting as per drawing

All as per Item No. 4.01 above but two way locking system with MS rod (with out Lock) .

All as per Item No. 4.01 above but of 150 mm long chromium plated mild steel handles

All as per item serial No 4.01 but new Stainless Steel Lock of 06 lever (Godrej Pattern)

Repairs to " Almirah Steel Small with shelves (Drg No FD-1032) " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of one coat of red oxide primer as per drawing.

All as per Item No.5.01 above but two way locking system with MS rod (with out Lock) .

All as per Item No. 5.01 above but of 150 mm long chromium plated mild steel handles

All as per item serial No 5.01 but new Stainless Steel Lock of 06 lever for Alimrah

Repairs to " Chair Varandha Steel (Drg No : FD/MAP-II/06) " & replacement of following components as shown on drg complete all as specified and directed :-

Removing US PVC Back & seat (As per draing ) with 4MM TH. (RIBS ON BACK SIDE) (weight not less than 1.5 Kgs Each), M&L for refixing the new seat as per drawing

S & F for replacement of old unserviceable Rubber Shoes of round bottom (for 20 Sq mm Leg)

Removing of broken / damaged / decayed part of steel furniture made of 20 mm dia MS tube then supply and refix new 20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces

Supply and fixing (welding as per standard workmanship) of 01 nos of 13 x 3 mm thick MS flat bar of 455 mm long (+- 5 mm) to side rails of seat at equal distance including a coat of red oxide primer and one coat of brush paint on steel surfaces and joints

Repairs to " Chair Varandha Steel (Drg No : FD-359) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable plastic newar / Plastic cane of varandah Chair with plastic cane of 4 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per mat pattern.

S & F for replacement of old unserviceable Rubber Shoes of round bottom (for 20 Sq mm Leg)

Removing of broken / damaged / decayed part of steel furniture made of 20 mm dia MS tube then supply and refix new 20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces

Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable 12 mm BWR ply of size (850 X 1974)mm including necessary fittings.

S & F for replacement of old unserviceable PVC Shoes (for 38 Sq mm Leg)

Cutting and removing of broken / damaged / decayed part of Bed made of 38 Sq mm MS tube then supply and fixing of new 38 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

Cutting and removing of broken / damaged / decayed part of bed made of 25 X 65 mm MS tube then supply and fixing of new 25 X 65mm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

Cutting and removing of broken / damaged / decayed part of bed made of 25 Sq mm MS tube then supply and fixing of new 25 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

Repairs to " Charpoy with hard top (FD: ED/MAP-II/01 " & replacement of following components as shown on drg Complete all as specified and directed by Eng-in-Charge.

Material & labour for replacement of old unserviceable 12 mm BWR ply of size (838 X 1916)mm including necessary nuts and bolts as per drawing,

S & F for replacement of old unserviceable PVC shoes (for 32 Sq mm Leg)

Cutting and removing of broken / damaged / decayed part of Charpoy made of 32 Sq mm MS tube then supply and fixing of new 32 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

Cutting and removing of broken / damaged / decayed part of Charpoy made of 25 X 65 mm MS tube then supply and fixing of new 25 X 65mm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

Cutting and removing of broken / damaged / decayed part of Charpoy made of 25 Sq mm MS tube then supply and fixing of new 25 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces

S & Fix 80 mm GI nuts and bolts for Charpoy with hard top & Bed hard Steel in replacement of US

Repairs to " Chair writing steel (FD: ED/E6/MAP/12 " & replacement of following components as shown on drg complete all as specified and directed :-

Supply and fixing of seat and back of chair writing as per existing shape and size as per drawing

MS frame of Chair writing with shoes

Material & labour for replacement of old unserviceable Hand rest as per drawing with necessary fittings

S&F Rubber stopper for 25 X 10 mm cantilever type MS tube.

Repairs to " Chair Computer (FD: ED/E6/MAP/12) " and revolving chairs (TP) (Equivalent to Chair Computer )& replacement of following components as shown on drg complete all as specified and directed :-

Hand rest of black integral shine made out of polyurethane with 75-85 shore "A" hardness and reinforced with MS insert with minimum 230 mm high hand rest incliding necessary fittings

Pedestal assembly of Chair Computer of injection moulded in black 30% glass filled nylon, 10.5 mm dia forged bright zinc plated 600 mm pitch-center dia with press fitted 05 nos of castors (ISI Marked)

Seat of Chair Computer of size 510 X 470 X 60 mm along with MS holder for lift operation and fixing of seat with hydraulic system as described in drawing

Back rest of Chair Computer and fixing new back rest with contour lumber support and hight adjustment handel as described in drawing

Hydraulic system (ISI Marked) as per drawing

Repairs to " Table bed side (Drg No FD/E6/MAP/15 (R) " & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable parts of the furniture of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading

S&F for replacement of 18mm Square pipe including a coat of red oxide primer on replaced steel surfaces

All as per Item No.12.01 above but 06 mm BWR back ply of size (400 X 420) mm

S & F for replacement of old unserviceable PVC Shoes (for 18 Sq mm Leg)

Repairs to " Table Steel 900 X 600 (Drg No FD-1007, FD-1008) " & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 600 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all roung , all as per drawing

M&L for replacement of broken / damaged part of steel furniture made of 24 Sq mm pipe and S&F new 24 Sqmm pipe having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces

S & F for replacement of old unserviceable PVC Shoes (for 24 Sq mm Leg)

Sch 'A' Part-II (Repairs to wooden furniture):- Repairs to " Table Centre Drawing No FD- 274" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all round all as per drawing

Repairs to "Chair Dining Officers (Drg No : FD/MAP-II/04)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable 75 mm thick 40 Density cushion of size 450 X 450 mm along with the leatherised rexine fabric costing not less than Rs 350/- per meter along with re fixing with the plywood at bottom as per drawing

Repairs to "Chair Dining OR (Drg No : FD-279 /228)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable plastic cane of Dining Chair of any type with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern

Repairs to "Chair Dining OR (Drg No : FD/E6/MAP/05)" & replacement of following components as shown on drg complete all as specified and directed :-

M&L for removing of Old unserviceable PVC Seat of diining Chair then S & F new PVC Seat with necessary stainless steel screws

M&L for two new 440 X 25 X 3 mm flat iron plate (Single brush painted over a coat of red oxide primer) with two holes at each end to the side rails of dining chair after minor cutting of the PVC seat for adjustment after bending at required length including 08 nos of 1 inch stainless steel screws and washer at the bottom of PVC seat of the chair

Repairs to " Table dining 6 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 1500 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all round

Repairs to " Table dining 4 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 1200 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all round

Repairs to " Table Peg (Drg No FD-384) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all round

M&L for replacement of leg of 1st class seasoned teak wood of Size 30 X 50 X 380 mm.

All as per Item No. 20.02 but long rail of seasoned teak wood of size 20X40X450 mm.

All as per Item No. 20.02 but new short rail / Bottom rail of seasoned teak wood of size 20X40X380 mm.

Repairs to " Teapoy (Drg No FD-382) " & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 450 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all round

Repairs to " Table bed side (Drg No FD-76" & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable with new side of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 510 X 230 mm with 4mm teakwood beading 510 mm long

S&F for replacement of old unserviceable with new top/middle self / bottom of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 450 X 230 with 4mm teakwood beading 450 mm long

All as per Item No.22.01 above but 06 mm BWR back ply of size (510 X 450) mm

Repairs to "Table writing (Drg No : FD-275)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 1145X 600 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all round

S&F for replacement of old unserviceable parts of the furniture of 6 mm thick BwR Plyood

Repairs to " Chair Easy (Drg No FD-229)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable plastic cane of seat/back of Chair Easy then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern

Repairs to " Chair Writing (Drg No FD-280)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable plastic cane of seat of Chair Writing then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern

Supply , fixing & setting of 100 mm thick (40 density) foam cusion (Kurlon /Sleepwell/ Feather Foam) for seat of Sofa set four / five / single seater (FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed by Eng-in-Charge.

Supply , fixing & setting of cover of cushion of size 21" X 22" X 4" made of tapestry cloth (Costing not less than Rs 320 per meter) of approved quality and providing zip excluding one side for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed by Eng-in-Charge.

M&L for replacement of 6 mm BWR ply to subject furniture as per drawing complete all as specifice and directed by Eng-in-Charge.

S&F for replacement of old unserviceable with new Stainless Steel Pegs (Minimum 120 mm long) complete all as specified and directed by Eng-in-Charge.

Material & labour for fixing of 4 mm th teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed by Eng-in-charge.

Material & labour for replacement of "Nylon Buffers " of Wooden furniture (Chair Dining offr, Chair Easy, Teapoy, Table Centre, Table Peg, Table dining, Table card etc ) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 75 mm fancy SS handels " to be fixed from inner side with secres & washer to subjected furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 100 mm long stainless Steel handel" to be fixed with secrews to the furniture ( Side Board and Bin Solid etc) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 70 X 70 X 30 mm wooden corner after polishing with 02 Nos of screws" to various wooden furniture (Chair Dining, Chair Dining Officers, Chair Writing, Table Writing, Dining Table etc), complete all as specified and directed by Eng-in-charge.

M&L for replacement of 18 mm thick prelaminated particle board exterior grade teak wood finish to subject furniture as per drawing complete all as specifice and directed by Eng-in-Charge.

M&L for removing old paint using paint remover and from following steel furniture and apply one coat of spray painting of synthetic enamel paint (Colour as decided by Eng-in-Charge) over a coat of red oxide primer as per drg complete all as specified and directed :-

All as described at sl No 36 above for "Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 )

All as described at sl No 36 above for "Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 )

All as described at sl No 36 above for " Almirah Steel Large with shelves (Drg No FD-1031)"

All as described at sl No 36 above for " Almirah Steel Small with shelves (Drg No FD-1032) "

All as described at sl No 36 above for " Locker Steel ( Drg No : CWE(P)V/SK/18) "

All as described at sl No 36 above for " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)"

All as described at sl No 36 above for " Chair Varandha (Drg No : FD/MAP-II/06) " & " Chair Varandha (Drg No : FD-359) "

All as described at sl No 36 above for " Metal Shelving Racks of Size 1875 X 900 X 500 mm"

All as described at sl No 36 above for " Side rack with Tray "

All as described at sl No 36 above for " Table with drawer 600 X 900 FD-1008 "

All as described at sl No 36 above for " Table without drawer 600 X 900 FD-1007 "

All as described at sl No 36 above for " Rack Shoe Steel FD/E6/MAP/02/R "

All as described at sl No 36 above for " Charpoy Steel (FD: ED/MAP-II/01 "

All as described at sl No 36 above for " Bed Hard Steel (FD: E6/MAP/08(R)) "

M & L for French polishing to wooden furniture after removing the dirt and dust using mechanical grinder and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed by Engr-in-Charge

All as described as per Item No. 37.00 hear-in above for " Table Centre Drawing No FD- 274"

All as described as per Item No. 37.00 hear-in above for "Chair Dining Officers (Drg No : FD/MAP-II/04)"

All as described as per Item No. 37.00 hear-in above for "Chair Dining OR (Drg No : FD-279 /228)"

All as described as per Item No. 37.00 hear-in above for " Table dining 6 person (Drg No FD/ MAP-II/03)"

All as described as per Item No. 37.00 hear-in above for " Table dining 4 person (Drg No FD/ MAP-II/03)"

All as described as per Item No. 37.00 hear-in above for " Table Peg (Drg No FD-384) "

All as described as per Item No. 37.00 hear-in above for " Teapoy (Drg No FD-382) "

All as described as per Item No. 37.00 hear-in above for "Table writing (Drg No : FD-275)"

All as described as per Item No. 37.00 hear-in above for " Chair Easy (Drg No FD-229)"

All as described as per Item No. 37.00 hear-in above for " Chair Writing (Drg No FD-280)"

All as described as per Item No. 37.00 hear-in above for " Sofa Five Seater FD- 281 & FD / MAP-II/02"

All as described as per Item No. 37.00 hear-in above for " Sofa Four Seater FD- 281 & FD / MAP-II/02"

All as described as per Item No. 37.00 hear-in above for " Sofa Single Seater FD- 281 & FD / MAP-II/02"

Replacement of wooden part of peg set of six (size 910x75x20mm) (FD-80) with hooks for hanging then fixing the existing usable pegs.

Replacement of wooden part of peg set of six (size 460x75x20mm) (FD-80) with hooks for hanging then fixing the existing usable pegs.

Replacement of 810 mm long legs of Rack Side Steel (FD-408) of size 40 X 40 X 3 mm after removing selfs and then refixing the same as per drawing and as specified and directed by Engr-in-Charge.

Replacement of shelf of size 450 X 890 mm of Rack Side Steel (FD-408) made of 1mm thick MS sheet as per drawing and as specified and directed by Engr-in-Charge.

Replacement of top shelf of size 450 X 890 mm with three spaces of Rack Dide Steel (FD-408) made of 1mm thick MS sheet as per drawing and as specified and directed by Engr-in-Charge.

Replacement of shelf of size 550 X 950 mm of Metal shelving racks of size 1875 X 900 X 500 mm (Equivalent to rack closed steel 4 tier) made of 1mm thick MS sheet with necessary corner clamps and 04 numbers of suitable MS nuts and bolts as per drawing and as specified and directed by Engr-in-Charge.

Replacement of 1875 mm long leg of Metal shelving racks of size 1875 X 900 X 500 mm (Equivalent to rack closed steel 4 tier) made of 40 X 40 X 3 mm thick MS Slotted angle as per drawing and as specified and directed by Engr-in-Charge.

Replacement of back of size 1875 X 900 mm of Metal shelving racks of size 1875 X 900 X 500 mm (Equivalent to rack closed steel 4 tier) made of 1mm thick MS sheet with necessary corner clamps and 08 numbers of suitable MS nuts and bolts as per drawing and as specified and directed by Engr-in-Charge.

Replacement of side of size 1875 X500 mm of Metal shelving racks of size 1875 X 900 X 500 mm (Equivalent to rack closed steel 4 tier) made of 1mm thick MS sheet with necessary corner clamps and 08 numbers of suitable MS nuts and bolts as per drawing and as specified and directed by Engr-in-Charge.

RPL SYNDICATE CO (BID ID -3457054)

ARIN AND COMPANY (BID ID -3460015)