PROVN OF UNDER GROUND SUMP (5000 Ltrs) FOR CHILLER PLANT, WATER SUPPLY AT GUARD POST OF WSA, WEATHER PROTECTING SHED AND RIFLE RACK FOR TECH BLDG AT AF STN UTARLAI

Amount

Demolition of cement Concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for pavement quality concrete (PQC) of flexural strength 40 kg/per square centimetre in field using minimum 400 kg of cement per cubic metre of concrete designed thickness 250 mm laying in bays as specified in drgs and adding 0.25 % by weight of cement with recron triangular fibre ,complete all as specified and directed.

Removing building materials etc. other than spoil payable under items to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M & L for PCC 1:3:6 Type C2 ( 40 mm graded stone aggregate Cement concrete in foundations,filling and mass concrete complete all as specified and directed.

M & L for 1:2:4 Type B2 ( 40 mm graded stone aggregate Cement concrete inshape including pilasters, buttresses columns, pillars,boundary pillars and embeded posts (including caps and bases) complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or duction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all specified and directed

S & f Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all specified and directed

M&L for mild steel bolts.purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed.

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

S & F Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S & F PVC (SWR) 150mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S & f 150mm PVC (SWR) bend /shoe any radius

M& L two coats syenthetic enamel paint of red oxide on new steel Surfaces of any description, over10cm in width orgirth,not otherwise described complete all as specified and directed

S & F PVC insulation panels 3 to 5mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of /M.S. as per specification and drawing

S & F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Supply and fix orion Neo LED street light of 70 Watt made up of pressure die cast aluminium housing with ploycarbonate cover and high power LEDs and secondary lenses with IP 66 protection 10KV SPD included. Efficiency >110 LPW and including junction box and PVC wire 2 core for connections from street light to junction box complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLSH, PVC insulated and unsheathed multi stranded FRLSH flexible copper conductor cable drawn in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer fixed flushed to the wall with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Samm FRLSH, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting chases in brick/ block/stone masonry wall, replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge.

S&F Switch piano flush type 5 amp single Pole one way 230 Volt complete all as specified & directed.

Supply and fix ceiling rose surface bakelite 65mm three terminal complete all as specified and directed.

Supply and fix of decorative post top 360 degree indirect light with IP-66 protection resistant to impact and corrosion , glare free and better uniformity complete all as specified and directed.

Supply and fixing of pressure die cast powder coated housing with PC diffuser efficent output LED with IP 66 protection complete all as specified and directed.

S&F sheet metal enclosures single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double fixed on flush to the wall including making the hole in the wall and fixing the DB including cement works and plastering complete all as specified and directed.

S&F MCBs single pole and neutral, 240 Volts 6 to 32 Amps, 'C' curve,10 KA complete all as specified and directed

SS MCB single pole, 240 volts 6 to 30 Amps 'C' curve, capacity 10 KA complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sqmm 2 core complete all as specified and directed.

Supply and lay Gl pipe 50mm dia, light grade ISI mark with all fittings laid in trenches, fixing in wall and pole including suitable Gl clamps for bracing the pipe with pole for cable protection complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25cm in depth

Providing dry tibba sand in trenches as sand cushioning to U/G cable including punning down of sand in layer all as speciied.

M & L for 40 to 50 mm thick rough fressed jodhpur type stone slab cover 25 to 30 cm wide and 40 to 50 cm in lenth laid sry abutting each other or under ground protection

Supply and fixing bracket for flood light fittings made put of 25mm bore pipe light grade GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm grade stone aggregate in coping, kerbs, bencing and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary from work complete

M&L for MS framed work of angle or other section with gusset plates rails braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (Exclusive of steel sheeting or other covering, runnings rails and guides) and hanging also fastening and fixing complete all as specified and directed.

Materials and labours for preapration of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer comlete all as specified and directed.

Dismantling timber frame work scantling 40 Sq cm and over in section in any position

Dismantling boarding, any description, fixed in any position with rails

M&L 2nd class hardwood plain fillets square rectrangular or traingular in section for rifle rack (drawing of rifle rack skirting) for rifel rack (Drawing of rifle rack approved by user) clean sawn, secured with nails complete all as specified and directed.

M&L 40mm thick hardwood 2nd class boarding, supplied & fixed with nails in any sitution (Except flooring and skirting) for rifle rack (Drawing of rifle rack approved by user) complete all as specified and directed.

M&L trating end of post, fencing post struts with black bituminous paint are exc 0.10 cm in width or girth complete all as specified and directed.

Materials and labours for preapration of new wooden surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 10mm dia 15 to 22.5 cm long screw bolt machine made with Kgs hexagonal or square head at one end and screwed the other, screwed ed fixed with washer complete all as specified and directed.

M&L for 12mm dia 15 to 22.5 cm long MS screw machine made with Kgs hexagonal or square head at one end and screwed the oter screwed end fixed with washer complete all as specified and directed.

Cutting holes into or through brick walls built in cement martar and Per making good in cement 1:3 cement concrete 1:2:4 type B-l as of Depth ( required exc 150 Sqcm but n exc 400 sqcm

Renewing tiles in patches area n exc 05 Sqm including removing and cleaning of old tiles, preparing beds and laying or setting jointing and pointing, New or old tiles complete all as specified and directed.

S&F extruded aluminium alloy barel tower bolt 150mm long type anodized ISI marked.

Surface excavation in hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed by Engineer-In-Charge

Excavating over areas, in hard/dense soil, n exc 1.5 m deep and getting out complete all as specified and as directed by Engineer-In-Charge

Removing excavated material to a distance exc. 1.5 KM and not exc. 5 KM complete all as specified & directed.

M&L for cement concreteType D-2 1:4:8 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd.

M&L for M-30 reinforced cement concrete (design mix) for foundations Complete all as specified and as directed by Engineer-In-Charge

M&L for M-30 reinforced cement concrete (design mix) for foundations, footings and ring beam complete all as specified and as directed by Engineer-In-Charge

Formwork to curved sides of concrete foundations, footings, bases of columns & similar work, vertical or to batter complete all as specified and as directed by Engineer-In-Charge

M&L for M-30 reinforced cement concrete (design mix) for sump wall and ring beam complete all as specified and as directed by Engineer-In-Charge

Formwork to curved surface of RCC wall and similar work, vertical complete all as specified and as directed by Engineer-In-Charge

M&L for M-30 reinforced cement concrete (design mix) for domes and ring beams of vent complete all as specified and as directed by Engineer-In-Charge

Formwork to sides and soffits of domes (curved in two planes) fair finished surfaces complete all as specified and as directed by Engineer-In-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-In-Charge

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-In-Charge

M&L for Mild steel TMT bars 5mm dia and over for stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-In-Charge

M&L for hardcore broken store or of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engg-in-charge

M&L for 150 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) for plinth course complete all as specified and as directed by Engg-in-charge

Removing excavated material exc. 250 m but n exc. 500m and depositing where directed

M&L for rendering 15mm thick in 1:4 on brick work or PCC block masonary surface (finished evn and smooth) using water proofing compound complete all as specified ans directed by Engineer-in-Charge (WPC will be paid seprately)

Supplying only water proofing compound

M&L for preparation of newly plastered surfaces and applying two coats of plastic emulsion paint over a coat of primer

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L APP based polymeric membrane minimum weighing 3kg /sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M & L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m

S &F Structural steel, rolled section such as joist, beam, channel, angle, tee, in available lengths Fe-290 (Gde E- 165) complete all as specified and directed

S& F Plain, black, mild steel sheeting 1 mm thick , in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed

S& F 150mm Cast iron pipes with flanged bends, centrifugally cast, class A, in any length laid in trenches / suction pipe as in sump complete all as specified and directed

S& F 100 mm bore Cast iron pipes with flanged bends, centrifugally cast, class A, in any length type of work complete all as specified and directed

M& L upto 150mm Bends CI (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or ocket and spigot) collars, caps and plugs

M&L for preparation for new steel surface of any description over 10cm in width or girth not other wise described applying two coats of synthetic enemel paint over one coat of red oxide primer all as specified.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting in any type of soil.

Excavation in trenches in exc 1.5 m wide and not exc 1.5 M depth for foundation and getting out in soft /loose soil complete all as specified and directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exc 25 cm (soil) complete all as specified and directed.

Removing excavation materials not exc 50 Metre and deposition where directed at a level not exc 1.5 M above the starting point (soil) complete all as specified and directed.

M&L 40 mm thick cement concrete type B1 1:2:4 (20 mm graded aggregate) as damp proof course and including formwork complete all as specified and directed.

M & L for 25mm thick cement concrete 1:2:4 type B0, under floor for tiling as bedding concrete complete all as specified

M&L Pre-cast cement concrete1;3:6 type C1 using 20mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar,complete all as specified and directed

M&L Providing cement concrete (nominal mix) Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and in shelves and the like.

Formwork to soffits of suspended slabs, such as roof slabs, floor slabs landing and similar work not exceeding 200mm thick (Horizontal & sloping) fair finished surfaces.

From work to edges of concrete flates treads breaks in floors, window cill concrete railing, opening in convert valley floor and roof exc 5 but n.exc 10 cm wide and sides RCC/PCC band in walls.

Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified

M & L for bands, straps, support of mild steel for clamps and hold fasts wall ties etc.

M & L applying tack coat of bitumen 85/25 @ 1.20 KG/Sqm including cleaning roof surface, and 100 mm thick average thickness mud phuska on roofs including 25mm thick mud plaster and 40mm thick brick tile laid on mud mortar & joints grouted flush in CM 1:3 with 5% of crude oil all as specified .

S & F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tubes , S&F in opening as per specification & drawing given in SSR-2004.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 bent edge having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets 5 mm thick for top rail, lock rail & bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheets to be fitted in the MS frame walded/sealed to the stiles & rails with suitable PVC sheet beading and joined to getger with solvent cement supplying & filling in the frame at site as per specification & drawing given in SSR-2004.

S & F butt hinges, medium weight, cold rolled mild steel size of hinges 100mm long

S & F Aluminium handle cast type anodized 150 mm size.

S & F steel windows or ventilators, fixed type, with glazing bars all as specified .

S & F 3mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified .

M&L for coloured Non skid ceramic tiles 7 to 8mm thick , area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry pointed in coloured cement to match shade of tiles with and including 15mm thick screed bed in CM 1:6 all as specified.

M & L coloured glazed ceramic tiles as on vertical surface of the 450 mm x 300 mm x 7 mm such as in skirting dado etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface with floor laid over with and including 10 mm thick cement rendering in cm 1:4 complete all as specified and directed.

M & L rendering 5 mm thick on ceiling in cm 1:3 finished even and smooth surface without using extra cement including three coats of white wash including preparation of surface

M & L rendering 15 mm thick in cm 1:6 on brick wall surface finished even and smooth without using extra cement with and including three coats of white wash including preparation complete all as speicifed and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 plaster on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement & with & including two coats of cement base paint over a coat of white wash with preperation.

S & F Vitreous China wash down water closet pan (pedestalpattern), white (excludingfixing bolts, flushing cisternand flush pipe) complete and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), finishing all as specified .

M & L Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified .

S&F for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S & F vitreous china wash basin, white, flat back, size 550 x 400mm with 15mm bore pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, 32mm bore waste fitting of PTMT, 32mm bore PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete fix in repair all as specified .

M & L vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm 'white' (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including fixing in new works

S&F sand cast iron waste and vent pipe in any length with or without ear with cement joints fixed to wall or in floor 100mm dia.

-ditto- all as per above but 75mm bore

S&F cast iron bend ( any radius) dimenshing pieces or tappers ( large bore measured) 100mm bore

-ditto- all as per above but 75 mm bore

S&F cast iron cowl 50mm bore complete all as specified and directed.

S&F cast iron floor trap 75mm dia incl jointing to waste pipe fixed in cement concrete type B-1 1:2:4) 75mm dia .

S & F 15mm bore 'medium grade' tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor all as specified .

S & F 20mm bore 'medium grade' tube galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified .

S & F rotational moulded polyetlene water storage tanks (cylindrical vertical with closed top) 500 ltrs cap hoisted and fixed in position all as specified. Note:-PVC tank shall be ISI marked and laying two layers.

S&F 20mm bore float Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight / 2 0 m m - 2 1 0 g m s.)

S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F bib taps long shank 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .

S&F 15mm bore pillar Tap Fancy type cast coppeer alloy with captan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore fixed complete all as specified and directed.

S & F 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed .

S & F 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup ( concealed type ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed .

S & F 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .

S & F 20mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .

S & F PVC connection 15mm size with PTMT nuts of length 450mm all as specified.

S&F 25mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-partions cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit

S & F PVC pipes 40 mm dia single socketted in any length as in waste pipe of WHB.

S & F brass chromium plated tubular towel rail 20 mm dia 'D' type 600 mm long between flanges imp all as specified.

Removal of excavated any type of soil to a distance exc 250 M but not exc 500 M and depositing where directed at a level not exc 1.5 meter above the starting point complete all as directed.

M & L providing pre cast cement concrete 1:2:4 type B1 using 20 mm graded aggregate in man hole cover set in cement mortar 1:4.

M & L cement concrete bed to drain pipe including packing under haunching of pipe after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) bore of pipe 150mm.

M & L, 150mm bore reinforced concrete pipes, class NP-2, laid in trenches and jointed complete with collers pipes all as specified.

M&L cutting into existing man holes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching for 150mm bore of pipe

M& L septic tanks , excavation in any type , foundation in PCC 1:2:4 type B-2, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around /fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 10 users. Note:- All as shown on Drg No. CEAA/TD/116 sheet 1/6 to 6/6 and as directed by Engir-in-charge(Drawing attached)

M& L Soakage wells excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 cocrete , including intercepting chamber screen chamber brick work in CM 1:4, RCC cover slab in M-25 /RR masonary / filling with brick bats complete of size 1.2 m dia X 3.m deep. Note :- All as shown on Drg No. CEAA/TD/80 sheet 1/2 and 2/2 and as directed by Engir-in-charge(Drawing attached)

M&L for 100 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in path/floor with and incl use and waste of form work and finishing thesurface even and fair including necessary form work complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M & L PCC 1:2:4 Type B2 ( 40 mm graded stone aggregate Cement concrete in foundations,filling and mass concrete complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation

Supply and lay steel water tubing GI 25mm bore 'medium grade' ISI marked with all fittings laid in trenches etc complete

Cutting existing steel tubing for alterations or additions (Each cut measured) of dia 40 to 50 mm complete all as specified and directed

S&F for Gun - metal, globe or gate valve ISI marked 25mm dia with iron wheel head, screwed at both ends for iron pipes and fixed with suitable size of union complete all as specified and directed.

S&F for Gun - metal, globe or gate valve ISI marked 50mm dia with iron wheel head, screwed at both ends for iron pipes and fixed with suitable size of union complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm single core multistandard copper conductor fire resistant low smoke and low halogen (FRLSH) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etx fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLS PVC insulated unsheathed copper earth wire for :-

One light point controlled by one switch

One ceiling fan/exhaust fan point controlled by one switch

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular white cover plate with frame 6 module complete all as specified and directed.

S&F Modular white cover plate with frame 2 module complete all as specified and directed.

S&F Metal flush box 2 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

S&F, two feet,white LED light fitting 9/10 Watt, illuminiation more than 120 lumen per watt, 6000K decorative ultra slim along with linear LED Tube lighting fixture with extruded heat shrink environmental friendly energy efficient complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete of all as directed by Engr-in-Charge.

S&F, LED, light fitting, 18 /20 Watt, illuminiation more than 120 lumen per watt 6000K, decorative ultra slim LED tube fixture with extruded heat shrink environmental friendly energy efficient complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as directed by Engr-in-Charge.

S&F exhuast fan, steel body AC single Phase. 230V of size 230mm sweep with, blades, and frame and louvers complete all as specified and directed.

M & L for submain wiring with two runs of 2.5 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC concealed conduits heavy duty grade ISI marked 25 mm dia (External) with wall thickness not less than 1.8 mm with conduit accessories and one run of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable as earth conductor complete all as specified and directed. Note: All runs of cables and 1 run of conduit shall be measured and paid as one metre length of unit.

S&F MCB distribution board (DB), double door type made out of sheet metal enclosure (CRCA sheet) dust and vermin proof DB, SPN 4 way with 200 Amps rated copper busbar, 250 Volts, earth bar IP 43 protection, flush to wall complete all as specified and directed.

Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Note:- MCB will be the same make as of DB.

Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 32 Amp in the MCB DB complete with connection testing and commissioningcomplete all as specified and directed. Note:- MCB will be the same make as of DB.

M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level connected to and including GI wire 4mm dia as earthing lead, by means of nuts, bolts, checknuts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil, PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.00 kg/Sqm with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 metre GI pipe 15mm bore for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. Any addition in length shall be measured and paid through seperate item.

S & F Building security light 18W made up of pressure die cast housing with integrated lenses and high power LEDs with IP66 protection. Illumination not less than 100 lumen per watt. Make : Crompton Cart Part No TRP-400-18-57-SL-LM-NSR of equivalent in Havells/Jaquar/Phillips

M&L for bracket for street light fitting made out of 25 mm bore pipe medium grade GI tube bent to shape required, fixed on wall with and including MS flat iron clamps and fasteners complete all as directed by Engr -in - charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 2 core complete all as specified and directed.

M & L for sand cushioning all around the cable for protection by natural tibba sand complete all as directed.

Supplying and Laying stone patti 40-50 mm thick, 25- 30 cm wide abutting each other for cable protection complete all as directed.

S & Laying in trenches for road/plinth and fixing alongwith pole/wall GITube 50 mm light grade for protection of cable complete all as speicifed and directed.

S&F pf polythenflim 150 micron laid on rammed earth complete all as specified and directed.

Devi Engineeing