SPECIAL REPAIRS TO CERTAIN SMQs P-10 P-11 P-13 P-14 P-15 P-96

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specifed and directed. .

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed. .

M&L 10 mm thick rendering in CM (1:6) on stone masonry surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of white cement based wall care putty finish (3mm thick) for smooth finish.etc complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles

Glazed ceramic tiles in Dado/ Skirting in vertical surface 350x250mmx7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with surface

M & L for vetrified Ceramic tiles of any shades 10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Ditto as per item 5 above but in skirting over 10 mm thick rendering in CM 1:4 as in backing coat for laying wall tiles

M&L for preparation of old painted surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss; efflorescent salts & trading oil, greasy spots and applying two coat of white wash on the ceiling etc complete all as specified and directed .

M&L for complete removal of existing treatment and applying old plastered surfaces of walls,Pillars, cornices etc and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including wherever necessary filling of nail holes/inequalities with 3mm white cement based wall care putty for smooth finish.etc complete all as specified and directed.

Complete removal of existing treatment of external surface of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush,cleaning, washing and removing dust, . Cracks less than 2 mm, should be cleaned free of dust with a vaccum cleaner and apply Dr. Fixit Primeseal (Efflorescence resistant penetrating primer.) let it dry. Then pour Dr. Fixit Raincoat into these cracks and wait for it to dry Apply the first coat of Dr. Fixit Raincoat without any dilution at the rate of 2 sqm per litre and allow it to dry before taking up the second and third coats, the rate of application being the same, Drying time between coats will be 6 to 8 hrs, A total thickness of 1 to 1.2 mm must be achieved when Dr. Fixit Raincoat is dry and including necessary scaffoldings etc , complete all as specified and directed Note:- Application of primer and paint shall be done by the authorised applicator of the manufacturer of the paint and a certificate to this effect shall be produced by the contractor.

Taking down doors/ chowkats with shutters (without taking off shutters from the frame) not exc 1.5 sqm each all as specified and directed.

Taking down doors/chowkats with shutters( without taking off shutters from the frame) exc1.5 sqm and n exc 4 Sqm each all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification complete all as specified and as directed.

M&L for 30 mm thick factory made solid PVC moulded door shutters, wood free, consisting of frame made out of MS tube of size 25 x 25 mm made out of 19 gauge MS sheet for top and bottom rail coated with steel primer, inner panel shall be 25 mm thick high density EPS, bonded with 2 mm thick termite, water and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain/prelaminated colour on one side and 2.00 mm thick plain/prelaminated PVC sheet on other side. The edges of shall be sealed with lipping of 10 mm wide PVC sheet batton with PVC Solvent cement and stile sides 25 mm thick and 30 mm thick PVC sheet fitted along MS tube for lock provision and PVC sheet of size 150 mm x 100 mm fitted on upper and lower face of inner side of EPS panel all as per manufacturers instructions complete all as specified and as directed.

Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F plain framed panelled shutter 2nd class hard wood with panels of 9mmthick plywood BWP grade in two panels ,35mmthick.

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking down steel/aluminium windows/ventilator complete with frames and shutters (without taking off the shutters) of area not exc 1.5 sqm complete all as specified and as directed.

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Unit rate quoted shall be deconed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 ,complete all as directed

Dismantling Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc.

M & L for Machine cut cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

M&L for full Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S&F Butt hinges, cast ss, with mild steel hinge pin, bright polished and fixed, type B-11

S&F aluminium handles cast type anodised 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors

Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors

Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.

Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets

S &F PVC connections 15 mm size with PTMT nuts of length 450 mm

S & F Bib taps, fancy type chromium plated with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore

S & F Pillar taps, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore

S & F Stop valves, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed

S&F vitreous china orissa pattern W.C of ISI branded /approved make long pan size 580 mm with 'P' or 'S' trap front or back inlet for fixing with foot rest etc complete. Incl lime or cement concrete for fixing W.C. pan etc complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern) white with trap including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, fixing bolts (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm X 1mm thick (18 gauge) conforming to the sample kept in the office of the AGE B/R I, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes of 75mm/100mm dia , jointed in cement mortar

PVC (SWR) pipes Double socketed, in any length with rubber ring joints, as in floors or fixed to walls 75 mm bore

PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or fixed to walls 110 mm bore

PVC (SWR) bends any radius 75 mm bore

PVC (SWR) bends any radius 110 mm bore

PVC (SWR) junction single, (Single T) equal or unequal 75 mm bore

PVC (SWR) junction single, (Single T) equal or unequal 110 mm bore

PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75 mm

S&F in repair PVC (SWR) `P’ trap 110/110 mm bore

Dismantling of roof terracing cement concrete (un-reinforced) including existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and washing with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material outside MD land complete all as specified and as directed. Note :- Quoted rate shall deemed to include the cost of diconnecting and refixing of PVC water tank in position.

M/L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment .

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reniforcement weighing not less than 4.00 Kg/Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.

DWARKESH STRUCT-CON

RK AND SONS CREATION

M/s S.D Construction Co

VIJAYA ENTERPRISES