SPECIAL REPAIRS TO JCOS AND OR ACCN BLDG NO T 41 TO T 43 AND T 18 26 TO 28 33 34 AND TOILET BLOCK AT SINH YODHA CAMP AT BABINA

Amount

Taking down chowkat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down shutters of any description exc 1 sqm but n exc 2 Sqm each etc complete all as specified and as directed

Taking down shutters of any description nexc 1 sqm each etc complete all as specified and as directed

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S&F, aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed

S&F, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300mm long etc complete all as specified and as directed

S&F, Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete.

S&F, locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S&F, 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

Ditto as above but 30 mm thick windows, ventilators etc provided with stiles and rails as specified in SSR Pt-I Sec 8 clause 8.20 (b) etc complete all as specified and as directed

S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed

S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of apparture 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed

S&F, butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed

S&F, Mild steel pressed handles, oval type, stove enamelled black 100mm size etc complete all as specified and as directed

S&F, Mild steel barrel tower bolts, stove enamelled black, with bright bolt 125mm size etc complete all as specified and as directed

S&F, Mild steel pressed handles, oval type, stove enamelled black 200mm size etc complete all as specified and as directed

S&F, mild steel slliding door bolts, plate type, stove enamelled black with bright bolt not less thatn 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed

M&L, prepairing surfaces of wood and wood based material, steel and iron work, new or old, of any description and girth not otherwise desctibed and treated with tar or coal tar black paint etc complete all as specified and as directed

S&F, mild steel flat iron 25x3 mm as in hold fasts etc all as specified, Confirming to Fe 410-0 or Fe 310-0 etc complete all as specified and as directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall etc complete all as specified and as directed

M&L, PCC 1:3:6 type C1 as in coping or bed plates for filling in holes of hold fasts or in pressed steel frame including necessary use and waste of form work etc complete all as specified and as directed

M&L preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L, two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F, in repair 225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed

M & L preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying three coats of white wash complete all as specified and directed.

M&L, Preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for complete removal of existing treatment from wall and coping and applying two coat of oil bound distemper over one coat of JK/Birla wall care putty including prepration of surface etc complete all as specified and as directed by the Engineer-in-Charge

M&L preparing old decorated surfaces of wall but complete removal of existing treatment and applying two coats cement base paint over one coat of JK/Birla wall care putty complete all as specified and as directed.

Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level.

M&L 40mm thick PCC 1:2:4 type B0(using 12.5 mm grd agg) in floors finishing complete.

Dismantling plain or corrugated Asbestos cement sheets, any thickness, in roof coverings.

Dismantling mild steel work as in wind Tie , grill grabbing etc complete all as specified and directed.

S&F Mild steel works as in fillets, posts and struts, balusters, nosing to steps wind ties, purlines, grills, gratings guard bars etc incl securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to 410-0 or Fe 310-0, complete all as sfd and directed.

S & F 6mm thick non asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. fixed with 'L' or 'J' type hooks

M&L for non asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts etc

Taking down steel tubing and connection incl cleaning for refixing or removal to store 15mm bore.

Taking down steel tubing and connection incl cleaning for refixing or removal to store 20mm bore.

S&F GI tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in trenches/floors 15mm bore.

S&F GI tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in trenches/floors 20mm bore.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms)

S&F PVC connections 15mm size with PTMT nuts of length 450mm.

S&F, Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F, PVC valveless , syphonic action type, flushing cistern 10 ltrs capacity low level, white with inlet, ball valve float valve and handle including brackets complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy, cromium plated with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore

S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete.

S&F towel rail 600mm long PTMT fixed with & incl CP brass screw and wooden/plastic cleats (min wt 190 gms).

S&F, vitreous china wash basin white, flat back size 630x450mm including one pillar cock cp 15mm bore, brackets of MS angle 25x3mm waste pipe 32mm, CP coupling etc complete all as specified and directed.

S&F, Vitreous China Squatting pan orrissa patteren size 580x440mm white with integral foot rest with S or P trap complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for the following sizes:- (a) 150 mm Internal dia of pipe

(b) 100 mm Internal dia of pipe

Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed for the following sizes:- (a) 150 mm Internal dia of pipe

(b) 100 mm Internal dia of pipe

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the following pipes:- (b) 150 mm Internal dia of pipe

(c) 100 mm Internal dia of pipe

M&L, 100mm thick, PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

M&L, sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment.

M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in kerb complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L, Joint free coloured non skid ceramic tile 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, Rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.

M&L, Joint free Glazed ceramic dark/light coloured tiles 300mm x 450mm and 7 to 8 mm thick, in skirting, dados(incl border on top) , risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles dark/light patern complete all as specified and directed.

Dismantling of water tanks (PVC/RCC of any description) exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S& F gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density platic ball screwed for iron pipe and fixed complete all as specified and directed.

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for point wiring complete with PVC insulated and unsheathed flame retardant los smoke low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with PVC moulded boxes terminal boxes of required size (not less than 1.0 mm thick) and including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following (Note : new point wiring will be done on the direction of Engineer -in- Charge. (a) One light point controlled by one switch

(b) one fan point controlled by one switch & regulator.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 78 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

Re- fixing of old servicable switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.(obtained from siteIwill be re- used )

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

Re- fixing of old socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.the items (obtained in servicable condition will be re -used )

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directedby Engr -In- Charge.

Re fixing of old Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directedby Engr -In- Charge.(obtained in servicable condition will be re -used)

S&F light fitting 1 x 10 watt bulkhead luminaries with LED 10 Watts, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make : Havells Cat No LHKL01160099 or Equivalent in C.G, Bajaj, Philips or Surya

S & F 10W LED ball lamp B-22, 3000K holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make Havels Cat part No-LHLDEBHEUEMD8X010 B22 ball lamp or equivalent of C&S/Bajaj

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 4.00 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S & F Regid non-metallic PVC conduit not less than 20 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 10 /20Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs

S&F in Repair 18 LED 6000K Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with integrated electronic driver and 18W LED lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No LHEXBLP7PN1W018(E-LITE PRIDE PLUS) or equivalent in Philips Cat No BN 108C LED 20S PSU NW WH / GE

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 16 Sq mm to be connected to existing MCB box / Main switches complete all as specified as dircted.

S & F House service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos. 90o bends, M.S. hook and stay or guy

MS RAJ KUMAR SINGH

M/S Ritu Tandon

M/S DEVINDER ENTERPRISES

m/s krishan kumar

M/s Ravi Traders

ROHIT ENTERPRISES