Development of new A site KSK from RONGSAI JUNCTION TO BORJORATRI JUNCTION ON RONGSAI BAJENGDOBA ROAD KURUNG Dist WEST GARO HILLS MEGHALAYA in TURA Retail SA under Guwahati DO

Subject: Development of new A site KSK "FROM RONGSAI JUNCTION TO BORJORATRI-JUNCTION ON RONGSAI BAJENGDOBA ROAD", KURUNG, Dist: WEST GARO HILLS, MEGHALAYA in TURA Retail SA under Guwahati DO of IOAOD State Office.

Tender Ref. No.: MAC/ERO/37/2025-26/PT-69

e-Tender ID: 2026_ERO_188694_1

Bidder/Firm/Company Name:

Type of Firm (Please Select)

Name of DSC User for the subject Tender:

Son/Daughter of DSC User for the subject Tender:

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER 0

We confirm that we have quoted the rates in the tender considering Inter-alia the 1. Tender Document(s) 2. Additional Document(s) (if any) 3. BOQ Document (Price Bid Format) 4. Corrigendum (if any) 5. Pre Bid Meeting Minutes (if any)

We ………………………………………………………………………………………………………………………… (Name of the Tenderer) hereby certify that we have fully read and thoroughly understood the tender requirements and accept all terms and conditions of the tender including all corrigendum/addendum issued, if any. Our offer is in confirmation to all the terms and conditions of the tender including all corrigendum/addendum, if any and minutes of the pre-bid meeting. In the event our offer is found acceptable, and contract is awarded to us, the complete tender document shall be considered for constitution of Contract Agreement.

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION 0

1 . No insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed) under Insolvency and Bankruptcy Code, 2016 or any other applicable law.

2(a) No insolvency resolution process or liquidation / bankruptcy proceeding is initiated under the Code or any other applicable law (in case where Code is not applicable).

2(b) Insolvency resolution process or liquidation / bankruptcy proceeding has been initiated under the Code or any other applicable law (in case where Code is not applicable) but application has neither been admitted by Adjudicating Authority nor moratorium has been imposed nor IRP has been appointed. I/We undertake to bring to the notice of IOCL immediately if such application is admitted by the Adjudicating Authority or moratorium has been imposed or IRP has been appointed. (Attach details of proceedings with technical bid).

3 . I / We undertake to bring to the notice of IOCL immediately if any proceedings under Insolvency and Bankruptcy Code, 2016 or any other applicable law are initiated or filed at any stage of evaluation of the tender.

4 . I / We are aware that we are not eligible to submit bid or our bid is liable to be cancelled in the event any insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed).

It is understood that if this declaration is found to be false, Indian Oil Corporation Ltd. shall have the right to reject my/our bid & forfeit the EMD / invoke BSD clauses and, if the bid has resulted in a contract, the contract will be liable for termination without prejudice to any other right or remedy (including blacklisting or holiday listing) available to Indian Oil Corporation Ltd.

ANNEXURE – C COMPLIANCE CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA 0

(A) The bidder, ………………………………………………………………………………………………………………………… is not from a country which shares a land border with India;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and are registered with the Competent Authority. Certificate of registration is attached with the bid;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and Government of India has extended lines of credit or is engaged in developmental projects in this country, ………………………………………………………………………………………………………… (Name of the Country) and hence do not require any separate registration for participation in this tender.

(B) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached).

(C) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached].

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA 0

• I/We have not tampered or modified the subject tender document in any manner and before uploading, same has been cross-checked with documents hosted on your e-portal https://iocletenders.nic.in. In case, if same is found to be tampered/modified, I/We understand that my/our tender will be summarily rejected and EMD/SD may be forfeited and I am / We are liable to be banned from doing business with and/or prosecuted.

• I/We, hereby confirm that if any discrepancy observed in the submitted tender even at a future date, I/We will abide by all the terms and conditions as per all the documents hosted including Addendums/Changes/Corrigendum, on your e-portal related with subject tender. I/We further assure that we agree to all the decisions confirmed in Pre-Bid Conference of the subject tender.

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING 0

I/We are participating in the above referred Tender as:

I/We hereby declare that I/We are participating in the above referred Tender as 'Partnership Firm'

Complete Declaration shall appear here after you select any option from above i.e. 'Proprietary Concern' / 'Partnership Firm' / 'Company'.

Details given below:

It is understood that if this declaration is found to be false, IndianOil Corporation Ltd. shall have the right to reject my/our bid. If the tender has been finalized, the contract will be liable for termination without prejudice to any other right of remedy (including black listing or holiday listing) available to IndianOil Corporation Ltd.

ANNEXURE – F DETAILS OF RELATIONSHIP WITH IOCL’S DIRECTORS ETC. 1

(A) Name of the Tenderer

(B) Organizational Structure

D E C L A R A T I O N - `A'

(1). Residence Address

(2). Office Address

(3). State whether tenderer is related to any Director/(s) of the Indian Oil Corporation Limited

(3.1). If 'Yes' to (C), State the name of IOCL’s Director & Tenderer’s relationship with him/her (e.g. Abcd Efgh (Brother)).

D E C L A R A T I O N - `B'

(2). Name of Partners

Sl. No. Name(s)

(3). State whether any of the partners is a Director to the Indian Oil Corporation Limited

(3.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(4). State whether any of the partners is related to any of the Director(s) of the Indian Oil Corporation Limited

(4.1). If `Yes’ to 5, State the name(s) of IOCL’s Director & the Concerned partner’s relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N - `C'

(1). Registered Office Address

(2). Principal Office Address

(3). State whether the Company is Pvt. Ltd. Co. or Public Ltd. Co.

(4). Name of Directors of the Company

(5). State whether any of the Directors of the Tenderer Company is a Director of Indian Oil Corporation Limited

(5.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(6). State whether any of the Director of the Tenderer Company is related to any of the Director’s of the Indian Oil Corporation Limited

(6.1). If `Yes’ to (7), State the name(s) of IOCL’s Director & the concerned Director’s (of the tenderer Co.) relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N

I / We have not employed any retired Director and above rank officer of Indian Oil Corporation Ltd in their firm.

I / We have employed retired Director and above rank officer of Indian Oil Corporation Ltd in my/our firm as detailed below

(F) Sl. No. PARTICULARS DETAILS

1 Name of the Person

2 Post last held in IOC

3 Date of Retirement

4 Date of employment in the firm of Tenderer

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS 0

I/We hereby declare that I/We/M/s.

(A) We hereby confirm that we have not transferred our ownership rights either in whole or in part to another entity or under process of transfer.

I/We have transferred my/our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

I/We are in process of transferring my/ our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

(B) I/We understand that Indian Oil Corporation Limited (IOCL) reserves the right to reject the tender of any entity, which has transferred its ownership rights in whole or in part or which is in process of transfer without assigning any reason for such rejection.

(C) I/ We also understand that refusal or failure to share the information regarding the status of any kind of business transfer process/restructuring etc. in this tender or at any later stage, as applicable, my/our tender is liable to be rejected by IOCL and without prejudice to any other remedy or action available with IOCL, IOCL shall forfeit the Earnest Money Deposit provided by the tenderer, in any form whatsoever.

ANNEXURE – H PARTICULARS OF BIDDER FIRM 0

(A) Name of the Bidders Firm

(B) Type of Firm

(C) Name(s) of Partners

Sl. No. Name(s)

(D) Partnership Deed

(E) Details of shareholders of firm holding at least 10% of share capital (Applicable in case of company)

Sl. No. Name(s) Total No of Shares held % of total Voting share Capital

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare:

I. I/We have not submitted multiple bids. i.e., more than 1 bid either individually or in any combination of person (individual capacity, proprietor, affiliates, partnership, association of persons, Company).

II. I/We am aware that, in case found that such multiple bids are submitted, all such bids are liable for rejection.

Note: The submitted bids shall be considered as multiple bids as explained in "PART - B" of tender document.

ANNEXURE – J UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII) 0

UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII)

I ………………………………………………………………………………, son/daughter of ………………………………………………………………………………, do solemnly affirm and state as under:

(1). That I am the authorized signatory of M/s ……………………………………………………………………………… and I am duly authorized to furnish this undertaking declaration on behalf of M/s ………………………………………………………………………………

(2). That M/s ……………………………………………………………………………… has submitted its bid against bidding document of above Tender reference.

(3). That the Firm/Company is fully aware of the provisions of Public Procurement (Preference to Make in India) (PP-MII), Order 2017 and its amendments.

(4). We hereby confirm that our offer is achieving the minimum local content of:

Minimum 50% (>=50%)

Deemed Class-II Local Supplier (As per Clause 2A of PP-MII Order Revision Dated 19.07.2024. I confirm that we are manufacturing the tendered item under PLI Scheme and have received incentive from concerned PLI ministry. This declaration is being made within the specific time period only, as notified by concerned PLI Ministry)

(5). Details of location(s) where the local value addition is made

(6). I confirm that I am aware of the implication of the above undertaking and our liability on account of wrong declaration.

Note: 1. This undertaking shall be certified by the authorized signatory of the bidder. Authorised signatory shall mean a) The Proprietor in case of a proprietorship firm. b) Any one of the partners having POA in case of a partnership firm. c) Power of Attorney holder in case of a company.

2. Preference is applicable only for suppliers claiming minimum 50 % Local Content.

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare that in the event:

I / We withdraw / modify our bid during the period of bid validity

I / We commit any other breach of tender conditions / contract which would have otherwise attracted forfeiture of EMD

I / We fail to / refuse to initiate the execution of the awarded Contract as per the terms of the Contract

then I / We could be debarred from being eligible for bidding / award of all future tender(s) of Indian Oil Corporation Limited for a period of SIX Months from the date of communication of such debarment.

Annexure Name Description Submission Status

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER NOT Submitted 0

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION NOT Submitted 0

ANNEXURE – C CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA NOT Submitted 0

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA NOT Submitted 0

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING NOT Submitted 0

ANNEXURE – F DECLARATION "A", "B", "C" & "D" NOT Submitted 0

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS NOT Submitted 0

ANNEXURE – H PARTICULARS OF BIDDER FIRM NOT Submitted 0

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING NOT Submitted 0

ANNEXURE – J UNDERTAKING ON PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA (PP-MII) NOT Submitted 0

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD NOT Submitted 0

Tender ref. RCC/ERO/37/2017-18/PT-52, Tender Id : 2017_ERO_66381_1

Technical bid opened on 02.01.2018

SN PARTY'S NAME K. MANI SINGH L Gandhi Singh Global Security and Placement Service A Oken Singh Kh. Gandhi Singh DAS AND SONS ENTERPRISE

1 Correspondance Address KHAGEMPALLI PANKHA, NEAR NGANAPPITHONG, P.O. - IMPHAL, P.S. - SINGJAMEI, IMPHAL WEST DISTRICT, MANIPUR - 795 001. Kangabam leikai, Imphal 795001 Shop No.35, Indira Enclave, Sector 21D Faridabad-121012 Awang Sekmai, Near LPG Bottling Plant, Sekmai P.O- Sekmai Bazar, Dist- Imphal West Manipur PIN-795136 Nagamapal Paonam Leikai, Imphal-795001 NEAR LOKENATH PETROL PUMP PANCHGRAM HAILAKANDI PIN-788802

Permanent Address do do do do do do

3 Mail ID [email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ) [email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ) [email protected] [email protected] [email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ) [email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 Type of organisation PROPRIETORSHIIP Sole Proprietorship Partnership Sole Proprietorship Sole Proprietorship Partnership

5 Authorised Person KONJENGBAM MANI SINGH Loukham Gandhi Singh Vinod Khera Mr. Ayangbm Oken Singh Mr. Maibam Sanjoy Meetei MR SATYENDRA CHANDRA DAS

6 EARNEST MONEY DEPOSIT (EMD ) of Rs. 57855.00 Payment ref. No.: 76392362033 Payment ref. No.:76392362055 Exemption cliamed Payment ref. No.:76392363717 Payment ref. No.:76392363959 Payment ref. No.:76392364118

7 EMD / EXEMPTION (MSE OR NSIC) NA NA NSIC/GP/FAR/2014/0011044 valid upto 03.03.2019 NA NA NA

8 PQC DOCUMENTS : Completed similar works during last 5 years ending 31.10.2017. (i) One Single work order of minimum value – Rs. 24,51,503.00 each (Rs.20,83,777.00 -MSE) (ii) Two single work orders of minimum value – Rs. 19,61,202.00 each(Rs.16,67,022.00 for MSE) (iii) Three single work orders of minimum value –Rs. 14,70,902.00 (Rs.12,50,266.00 for MSE) Similar job/works means experience in successful completion of Handling / Haulage / Carting & Cleaning / Housekeeping / manpower supply . WO NO. : 24696744 DT. 11.03.2016- IOCL WO VALUE : RS. 119.81 LAKH, CONSTRUCTION OF A-SITE RETAIL OUTLET DATE OF COMPLETION: 19.10.2016 COMPLETION VALUE: RS. 78,80,193.76 SAP GENERATED COMPLETION CERTIFICATE WO NO. 23997620 dtd. 28.10.2013-IOCL WO Value :Rs. 2943406.09 General Maintenance Contract (Haulage) at IOCL, Imphal Depot Completion Date : 30.09.2015 Submitted Completion Certificate ref. nil dtd. 21.09.2016 issued by Mr. D.Mephum Maring, Sr Depot Mgr/Imphal Depot without completion value As per SAP it is Rs.29.43 Lac Complete work order submitted against TQ. Completion certificate with executed value Rs.29.43 Lac submitted against TQ Letter of Award ref. no. NHEMD/CE©/2014/249 DT. 02.07.2014- NHPC Ltd, Haryana for Up keeping of NHPC office complex, Faridabad Period: 12 Months we.f. 07.07.2014 Value of WO: Rs. 98.01 lakh Extention: Ref. NH/EMS/MGR©/2015/627 dt. 22.6.2015, period: 07.07.2015-17.09.2015 Revised WO Value: Rs. 117.61 lakh Completion Certificate: ref. NH/EMS/MGR(C)/2015/1294 dt. 21.9.2015 Completion dt. 17.09.2015 (incl extension) for Rs.124.89 Lac WO NO. 24269948 dt. 12.10.2014-IOCL WO VALUE: RS. 96 Lac WORK: Cylinder Handling and Haulage Contract at LPG BP, Sekmai As per SAP executed value : Rs. 15.27 lakh Completion value does not match with the requirement of PQC of single work order Completion certificate submitted against TQ for Rs.85.45 Lac excluding Tax only work done certificate issued by Airports Authority of India , Imphal Airport submitted following details mentioned in above certificate : WO NO. AAI/IMP/AGM (E-C)/W.O.-4/2015-16/132 DTD. 29.6.2015 for Repair and maintenance rate contract (civil works) of terminal building and operational area at Imphal Airport during 2015-16 WO value : Rs. 40.00 lakh Date of Completion 14.7.2016 Completed value : Rs. 66.23 lakh Result: Satisfactory issue Date : 18.05.2017 Work order copy submitted against TQ Against TQ bidder has replied that item no 8,9 & 10 in the schedule of submitted work order meets the similar works IOC WO NO. IBP-BKH/GREEN BELT/TWO dt. 31.8.2013 for maintenance of green belt buffer zone drainage and water supply sustem for two yeara at LPG BP, Borkhola, Assam during 01.09.13 to 31.08.15 for Rs. Completion certificate dated 31.12.16 submitted for Rs. 33.45 lakh

9 Annual turnover of at least Rs.34,71,328.00 (Rs.29,50,629.00 for MSE) during any of the preceeding three financial years i.e 2014-15, 2015-16 & 2016-17 (RS. IN LAKH)

FY 2016-17 - Rs. 637.09 (Not signed by the auditor) 28.21

FY 2015-16 - Rs. 474.43 252.02 Submitted against TQ 73.69

10 PAN No ATLPS9724K- KONJENGBAM MANI SINGH ATLPS8146B-Loukham Gandhi Singh AAFFG9354A AULPS6581R-A OKEN SINGH BCDPS3243K-Mr. Gandhi Singh AAFFD6537J

11 GST No 14ATLPS9724K1Z0 14ATLPS8146B2ZK 06AAFFG9354A1ZM 14AULPS6581R1ZJ 14BCDPS3243K2ZJ 18AAFFD6537Z6

12 PF Registration AS/3134 NE/GHY/9341 PF: HR/FBD/11328, AS/5110 NEGHY1193887- Submitted against TQ NE/GHY/10062

13 Declaration A,B,C & D -Annexure-B Submitted Submitted Submitted against TQ Submitted Submitted Submitted

14 Black listing declaration -Annexure-D (to be submitted on letter head) Submitted Submitted Submitted against TQ but not on letter head Submitted Submitted Submitted

15 Undertaking for Nontampering of data -Annexure-E (to be submitted on letter head) Submitted Submitted Submitted against TQ but not on letter head Submitted Submitted Submitted

16 Tender acceptance Submitted Submitted Not submitted Submitted Submitted Submitted

17 Power of Attorney PROPRIETORSHIIP, MR. K. MANI SINGH NA-proprietorship firm submitted, Mr. Vinod Kumar NA-proprietorship firm Submitted Mr. Maibam Sanjoy Meetei submitted - Partner - Sri Satyendra Chandra Das (not mentioned in tender participation), signed by other partner Smt. Reena Rani Das

18 Registered Partnership deed or Certificate of Incorporation with Memorandum & Articles of Association Affidavit Submitted Affidavit Submitted Deed of Partnership , Form-C- Acknolwedgement of Registraton of Firms, Registration Certificate of , Labour Department , Haryana grant of Licnence for employment of 71 labourers, ref. 46(L-425)/2014/ALK dt. 26.9.2014 Affidavit submitted Sole Proprietorship -NA submitted Partnership deed

18 Statement of Credential - Annexure-A Submitted Submitted Submitted against TQ Submitted Submitted Submitted

19 Bank Mandate- Annexure-F Submitted Submitted Submitted against TQ Submitted Submitted Submitted

20 No dues Certificate - Annexure-O Submitted Submitted Submitted against TQ Submitted Submitted Submitted

23 e-Tender Bid ID 362033

24 Tender Uploaded using DSC of Konjengbam Mani Singh Loukham Gandhi Singh VINOD KUMAR Ayangbam Oken Singh SINGH KH GANDHI SATYENDRA CHANDRA DAS

TQ1 TQCQ_293503- Replied TQCQ_293505- Replied TQCQ_293506- Replied TQCQ_293509- Replied TQCQ_293511- Replied

TQ2 TQCQ_293504- Replied TQCQ_293508- Replied TQCQ_293512- Replied

Sr. No Bid ID Name of the Bidder PNR No/ Certificate Amount Remarks Digital Signature

1/6 362033 K. MANI SINGH 76392362033 57855 Konjengbam Mani Singh

2/6 362055 L Gandhi Singh 76392362055 57855 Loukham Gandhi Singh

3/6 362750 Global Security and Placement Service Exemption VINOD KUMAR

4/6 363717 A Oken Singh 76392363717 57855 Ayangbam Oken Singh

5/6 363959 Kh. Gandhi Singh 76392363959 57855 SINGH KH GANDHI

6/6 364118 DAS AND SONS ENTERPRISE 76392364118 57855 SATYENDRA CHANDRA DAS

Tender Reference Number: MAC/ERO/37/2025-26/PT-69

(A) Incorrect/ false declaration will result in disqualification. (B) Necessary supporting documents to be enclosed. (C) Corporation reserves the right to assess the tenderer’s capacity and capability if necessary by visiting/ inspecting recently executed / under execution of works.

S. No. DETAILS ABOUT TENDERER

1 Name of the Firm / Company

2 Social Category of the Firm / Company

2 Category of the Business SELECT

3 Name of the person who's DSC is being used for digital signing as per IT ACT 2008

4 Power of Attorney Issued to [If bid not submitted by "Proprietor"]

5 Date / Year of Establishment of the Firm / Company

6 Name of the Proprietor / Partners / Directors 1

7 Income Tax Returns Acknowledgement (If applicable) Filed for last three assessment years (i.e. corresponding financial years):

a. ITR Assessment Year 2025-26 (FY 2024-25)

b. ITR Assessment Year 2024-25 (FY 2023-24)

c. ITR Assessment Year 2023-24 (FY 2022-23)

8 EMD Amount INR 25,000/- : EMD submission Details

9 SIMILAR WORKS EXPERIENCE: Experience of having successfully completed similar works as per PRE-QUALIFICATION CRITERIA of Tender GIVE PROPER DETAILS TO AVOID REJECTION WORK ORDER #1 WO Issued by: WO No.: ........................... Dated DD.MM.YYYY Sub.: .................................................................................................................................. WO Value: Rs. .......................... Completion Certificate No.: ........................... Dated DD.MM.YYYY Completion Value: Rs. .................... Completion Date: DD.MM.YYYY

WORK ORDER #2 WO Issued by: WO No.: ........................... Dated DD.MM.YYYY Sub.: .................................................................................................................................. WO Value: Rs. .......................... Completion Certificate No.: ........................... Dated DD.MM.YYYY Completion Value: Rs. .................... Completion Date: DD.MM.YYYY

WORK ORDER #3 WO Issued by: WO No.: ........................... Dated DD.MM.YYYY Sub.: .................................................................................................................................. WO Value: Rs. .......................... Completion Certificate No.: ........................... Dated DD.MM.YYYY Completion Value: Rs. .................... Completion Date: DD.MM.YYYY

10 ANNUAL TURNOVER The annual turnover of the Tenderers during ANY of the preceding three financial years should be as per PRE-QUALIFICATION CRITERIA of Tender

A2. Unique Document Identification Number (UDIN) for FY 2024-25

B2. Unique Document Identification Number (UDIN) for FY 2023-24

C2. Unique Document Identification Number (UDIN) for FY 2022-23

D2. Unique Document Identification Number (UDIN) for FY 2021-22

E. MAXIMUM TURNOVER AMOUNT

OTHER COMMERCIAL DOCUMENTS

12 Provident Fund (PF) Registration Number

13 Tax Quotation / Declaration

(a) GST Registration Number

(b) Applicable Service Category (for GST purposes)

(c) Applicable % of GST SELECT

(d) Service Accounting Code (SAC) for selected Service Category

(e) Whether Service Covered under Reverse Charge? [At present Services of GTA, Legal and Sponsorship, among others, are covered under GST Laws]

(f) Whether the bidder is exempted from registration under GST (Turnover of less than Rs 20 Lakh/ 10Lakh in case of special category States)

(g) Whether Bidder is under Composition Scheme as defined under section 10of CGST Act, 2017?

14 • Undertaking for Sole Proprietorship OR • Partnership Deed OR • Certificate of Incorporation with Memorandum and Articles of Association SELECT

15 Power of Attorney SELECT

16 Submission confirmation of all the "Other Mandatory Documents" as per 'Declaration / Undertaking" Sheet SELECT

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par Less (-)

Tender Inviting Authority: General Manager I/c (Materials & Contracts), Eastern Regional Office

Name of Work: Development of new A site KSK "FROM RONGSAI JUNCTION TO BORJORATRI-JUNCTION ON RONGSAI BAJENGDOBA ROAD", KURUNG, Dist: WEST GARO HILLS, MEGHALAYA, Pin - 794109 in TURA Retail SA under Guwahati DO of IOAOD State Office.

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 LAND DEVELOPMENT item code 1

2 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth within premises item code 2 M2 Excess(+) Full Conversion INR

3 CONSTRUCTION OF SALES BUILDING item code 3

4 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 4

5 i) All kinds of Soil item code 5 M3 Excess(+) Full Conversion INR

6 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item code 6 M3 Excess(+) Full Conversion INR

7 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item code 7 M3 Excess(+) Full Conversion INR

8 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 8

9 i) Local Fine Sand within grading zone IV item code 9 M3 Excess(+) Full Conversion INR

10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item code 10 M2 Excess(+) Full Conversion INR

11 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 11 M2 Excess(+) Full Conversion INR

12 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 12

13 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item code 13 M3 Excess(+) Full Conversion INR

14 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item code 14 M3 Excess(+) Full Conversion INR

15 viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 40mm) item code 15 M3 Excess(+) Full Conversion INR

16 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 16

17 i) Foundations,footings,bases of column item code 17 M2 Excess(+) Full Conversion INR

18 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 18

19 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 19 M3 Excess(+) Full Conversion INR

20 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : item code 20

21 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 21 M3 Excess(+) Full Conversion INR

22 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) item code 22 M3 Excess(+) Full Conversion INR

23 Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). item code 23 M3 Excess(+) Full Conversion INR

24 Centering and shuttering including strutting, propping etc. and removal of form for : item code 24

25 i) Foundations,footings,bases of columns, etc. for mass concrete item code 25 M2 Excess(+) Full Conversion INR

26 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item code 26 M2 Excess(+) Full Conversion INR

27 vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards item code 27 M2 Excess(+) Full Conversion INR

28 viii) Suspended floors, roofs,landings balconies and access platform with water proof ply 12mm thick item code 28 M2 Excess(+) Full Conversion INR

29 ix) Lintels, beams, plinth beams, girders, bressumers cantilevers and with water proof ply 12mm thick item code 29 M2 Excess(+) Full Conversion INR

30 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 30

31 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 31 KG Excess(+) Full Conversion INR

32 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 32

33 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item code 33 M3 Excess(+) Full Conversion INR

34 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item code 34 M2 Excess(+) Full Conversion INR

35 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item code 35 M2 Excess(+) Full Conversion INR

36 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item code 36 KG Excess(+) Full Conversion INR

37 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover item code 37 M2 Excess(+) Full Conversion INR

38 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement item code 38 M2 Excess(+) Full Conversion INR

39 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item code 39 M2 Excess(+) Full Conversion INR

40 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item code 40 M2 Excess(+) Full Conversion INR

41 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified item code 41

42 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 item code 42 M2 Excess(+) Full Conversion INR

43 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 43

44 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item code 44 M2 Excess(+) Full Conversion INR

45 25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) item code 45 M2 Excess(+) Full Conversion INR

46 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item code 46

47 ii) 110 mm diameter item code 47 M- Excess(+) Full Conversion INR

48 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 48

49 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item code 49 M2 Excess(+) Full Conversion INR

50 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item code 50

51 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item code 51 M2 Excess(+) Full Conversion INR

52 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item code 52 M2 Excess(+) Full Conversion INR

53 Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete. item code 53 M2 Excess(+) Full Conversion INR

54 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item code 54 M2 Excess(+) Full Conversion INR

55 Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm) item code 55 M2 Excess(+) Full Conversion INR

56 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item code 56 M2 Excess(+) Full Conversion INR

57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item code 57 M2 Excess(+) Full Conversion INR

58 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. item code 58 EA Excess(+) Full Conversion INR

59 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: item code 59

60 i) W.C. pan with ISI marked white solid plastic seat and lid item code 60 EA Excess(+) Full Conversion INR

61 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : item code 61

62 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item code 62 EA Excess(+) Full Conversion INR

63 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : item code 63

64 i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps item code 64 EA Excess(+) Full Conversion INR

65 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item code 65 EA Excess(+) Full Conversion INR

66 Providing and fixing toilet paper holder : item code 66

67 i) C.P. brass item code 67 EA Excess(+) Full Conversion INR

68 Providing and fixing soil, waste and vent pipes : item code 68

69 i) 100mm dia Sand cast iron S&S pipe as per IS: 1729. item code 69 M- Excess(+) Full Conversion INR

70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall item code 70

71 i) 15 mm nominal outer dia Pipes item code 71 M- Excess(+) Full Conversion INR

72 ii) 20 mm nominal outer dia Pipes item code 72 M- Excess(+) Full Conversion INR

73 iii) 25 mm nominal outer dia Pipes item code 73 M- Excess(+) Full Conversion INR

74 v) 40 mm nominal outer dia Pipes item code 74 M- Excess(+) Full Conversion INR

75 Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall. item code 75

76 ii) 20 mm nominal outer dia Pipes item code 76 M- Excess(+) Full Conversion INR

77 iii) 25 mm nominal outer dia Pipes item code 77 M- Excess(+) Full Conversion INR

78 Providing and fixing brass bib cock of approved quality : item code 78

79 i) 15 mm nominal bore item code 79 EA Excess(+) Full Conversion INR

80 Providing and fixing brass stop cock of approved quality : item code 80

81 i) 15 mm nominal bore item code 81 EA Excess(+) Full Conversion INR

82 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : item code 82

83 i) 25 mm nominal bore item code 83 EA Excess(+) Full Conversion INR

84 iii) 40 mm nominal bore item code 84 EA Excess(+) Full Conversion INR

85 Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : item code 85

86 i) 100mm inlet & 100mm outlet SCI S&S as per IS - 3989. item code 86 EA Excess(+) Full Conversion INR

87 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item code 87 L- Excess(+) Full Conversion INR

88 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) item code 88

89 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item code 89 KG Excess(+) Full Conversion INR

90 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item code 90 KG Excess(+) Full Conversion INR

91 Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : item code 91

92 ii) 12mm thick particle board with Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, Grade I item code 92 M2 Excess(+) Full Conversion INR

93 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): item code 93

94 ii) With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm) item code 94 M2 Excess(+) Full Conversion INR

95 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item code 95

96 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item code 96 KG Excess(+) Full Conversion INR

97 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item code 97 M2 Excess(+) Full Conversion INR

98 Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality). item code 98 EA Excess(+) Full Conversion INR

99 Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item code 99

100 i) 250x10 mm item code 100 EA Excess(+) Full Conversion INR

101 ii) 200x10 mm item code 101 EA Excess(+) Full Conversion INR

102 Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item code 102

103 i) 125 mm item code 103 EA Excess(+) Full Conversion INR

104 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. item code 104

105 i) With stainless steel cover plate minimum 1.25 mm thickness item code 105 EA Excess(+) Full Conversion INR

106 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge. item code 106

107 i) Powder coated minimum thickness 50 micron aluminium tubular handle bar item code 107 EA Excess(+) Full Conversion INR

108 Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge item code 108

109 i) Non Decorative finish item code 109 M2 Excess(+) Full Conversion INR

110 CONSTRUCTION OF SEPTIC TANK & SOAK PIT item code 110

111 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 111

112 i) All kinds of Soil item code 112 M3 Excess(+) Full Conversion INR

113 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 113 M2 Excess(+) Full Conversion INR

114 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 114

115 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 115 M3 Excess(+) Full Conversion INR

116 Centering and shuttering including strutting, propping etc. and removal of form for : item code 116

117 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item code 117 M2 Excess(+) Full Conversion INR

118 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 118

119 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 119 KG Excess(+) Full Conversion INR

120 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 120

121 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item code 121 M3 Excess(+) Full Conversion INR

122 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 122

123 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item code 123 M2 Excess(+) Full Conversion INR

124 Providing Neat cement punning item code 124 M2 Excess(+) Full Conversion INR

125 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 125

126 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item code 126 M2 Excess(+) Full Conversion INR

127 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 item code 127 EA Excess(+) Full Conversion INR

128 CONST. OF Catch Water Drain item code 128

129 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 129

130 i) All kinds of Soil item code 130 M3 Excess(+) Full Conversion INR

131 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 131 M2 Excess(+) Full Conversion INR

132 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 132

133 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 133 M3 Excess(+) Full Conversion INR

134 Centering and shuttering including strutting, propping etc. and removal of form for : item code 134

135 i) Foundations,footings,bases of columns, etc. for mass concrete item code 135 M2 Excess(+) Full Conversion INR

136 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 136

137 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 137 KG Excess(+) Full Conversion INR

138 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 138

139 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item code 139 M3 Excess(+) Full Conversion INR

140 Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. item code 140 KG Excess(+) Full Conversion INR

141 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item code 141

142 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item code 142 M2 Excess(+) Full Conversion INR

143 Providing Neat cement punning item code 143 M2 Excess(+) Full Conversion INR

144 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item code 144

145 ii) 110 mm diameter item code 145 M- Excess(+) Full Conversion INR

146 CONSTRUCTION OF DRIVEWAY, APPROACH & BUFFER STRIP item code 146

147 Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge. item code 147

148 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item code 148 M3 Excess(+) Full Conversion INR

149 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item code 149 M3 Excess(+) Full Conversion INR

150 Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) item code 150

151 ii) M40 grade 80 mm thick reflective type Lacquered finish item code 151 M2 Excess(+) Full Conversion INR

152 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 152

153 i) All kinds of Soil item code 153 M3 Excess(+) Full Conversion INR

154 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 154 M2 Excess(+) Full Conversion INR

155 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 155

156 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item code 156 M3 Excess(+) Full Conversion INR

157 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 157

158 i) Foundations,footings,bases of column item code 158 M2 Excess(+) Full Conversion INR

159 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 159

160 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 160 M3 Excess(+) Full Conversion INR

161 Centering and shuttering including strutting, propping etc. and removal of form for : item code 161

162 i) Foundations,footings,bases of columns, etc. for mass concrete item code 162 M2 Excess(+) Full Conversion INR

163 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 163

164 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 164 KG Excess(+) Full Conversion INR

165 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 165

166 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item code 166 M3 Excess(+) Full Conversion INR

167 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 167

168 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item code 168 M2 Excess(+) Full Conversion INR

169 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/perlite respectively conforming to IS:2547 (Part - I & II), applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : item code 169 M2 Excess(+) Full Conversion INR

170 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item code 170 M2 Excess(+) Full Conversion INR

171 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item code 171 M2 Excess(+) Full Conversion INR

172 CONSTRUCTION OF CANOPY OF 14M*9M SIZE item code 172

173 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 173

174 i) All kinds of Soil item code 174 M3 Excess(+) Full Conversion INR

175 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 175

176 i) Local Fine Sand within grading zone IV item code 176 M3 Excess(+) Full Conversion INR

177 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 177 M2 Excess(+) Full Conversion INR

178 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 178

179 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 179 M3 Excess(+) Full Conversion INR

180 Centering and shuttering including strutting, propping etc. and removal of form for : item code 180

181 i) Foundations,footings,bases of columns, etc. for mass concrete item code 181 M2 Excess(+) Full Conversion INR

182 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 182

183 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 183 KG Excess(+) Full Conversion INR

184 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item code 184

185 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate item code 185 EA Excess(+) Full Conversion INR

186 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item code 186 EA Excess(+) Full Conversion INR

187 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty item code 187

188 ii) 150 mm dia. R.C.C. pipe item code 188 M- Excess(+) Full Conversion INR

189 iv) 300 mm dia. R.C.C. pipe item code 189 M- Excess(+) Full Conversion INR

190 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item code 190

191 iv) Pipes, Cable etc. > 80mm < 300m dia item code 191 M- Excess(+) Full Conversion INR

192 Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) /Super Durable Polyester (SDP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP /SDP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP/SDP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. item code 192

193 ii) Plain Sheet for Ridges (500 - 600mm). item code 193 M- Excess(+) Full Conversion INR

194 iii) Plain sheet for Flashings/ Aprons (Upto 600 mm) item code 194 M- Excess(+) Full Conversion INR

195 iv) Plain Sheet for Gutter (600 mm over all girth) item code 195 M- Excess(+) Full Conversion INR

196 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item code 196

197 iii) 160 mm diameter item code 197 M- Excess(+) Full Conversion INR

198 Providing & fixing BARE Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.55 mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge. item code 198 M2 Excess(+) Full Conversion INR

199 Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa & 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 120 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure. item code 199 M2 Excess(+) Full Conversion INR

200 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item code 200 KG Excess(+) Full Conversion INR

201 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 201

202 iii) 3 Core x 1.5 sq. mm. (copper) item code 202 M- Excess(+) Full Conversion INR

203 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 203 M- Excess(+) Full Conversion INR

204 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 204

205 vii) 3 Core x 2.5 sq. mm item code 205 EA Excess(+) Full Conversion INR

206 Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing. item code 206

207 i) For cables 2.5 to 4 sqmm XLPE / AYFY item code 207 EA Excess(+) Full Conversion INR

208 S/F Under Canopy recess mounted Linear LED Lights item code 208 EA Excess(+) Full Conversion INR

209 CONSTRUCTION OF SINGLE SIDED HOARDING item code 209

210 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 210

211 i) All kinds of Soil item code 211 M3 Excess(+) Full Conversion INR

212 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item code 212 M3 Excess(+) Full Conversion INR

213 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 213 M2 Excess(+) Full Conversion INR

214 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 214

215 ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm) item code 215 M3 Excess(+) Full Conversion INR

216 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 216

217 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item code 217 M2 Excess(+) Full Conversion INR

218 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item code 218 KG Excess(+) Full Conversion INR

219 Painting on G.S. sheet with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade, 2 or more coats,including a coat of approved steel primer but excluding a coat of mordant solution item code 219 M2 Excess(+) Full Conversion INR

220 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 220

221 i) Foundations,footings,bases of column item code 221 M2 Excess(+) Full Conversion INR

222 Supply and fixing of 30 W LED (Light Emitting Diode) light fixture with fittings and accessories for hoarding light purposes having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item code 222 EA Excess(+) Full Conversion INR

223 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 223

224 vi) 3 Core x 1.5 sq. mm. item code 224 EA Excess(+) Full Conversion INR

225 vii) 3 Core x 2.5 sq. mm item code 225 EA Excess(+) Full Conversion INR

226 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 226

227 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 227 M- Excess(+) Full Conversion INR

228 i) 2 Core x 1.5 sq. mm. (copper) item code 228 M- Excess(+) Full Conversion INR

229 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item code 229

230 v) 25 x 3 mm GI strip item code 230 M- Excess(+) Full Conversion INR

231 Supply & fixing of weatherproof 125 mm dia junction box (4 way entry) of BALIGA/CEAG-FCG/FLEXPRO/FEPL make including clamping arrangement, all complete as per specification & direction of Engineer In-charge. item code 231 EA Excess(+) Full Conversion INR

232 TRANSPORTATION AND INSTALLATION OF TANKS item code 232

233 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item code 233

234 iii) 15/20 KL Tank with fittings : 0 - 30 Km item code 234 LS Excess(+) Full Conversion INR

235 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km item code 235 KM Excess(+) Full Conversion INR

236 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item code 236

237 iv) In brick masonry pit with RCC matt under driveway including RCC top slab as per standard Drg. ENG/318. Manhole cover plates and frame to be paid separately . item code 237 LS Excess(+) Full Conversion INR

238 Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125. item code 238 M- Excess(+) Full Conversion INR

239 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 239

240 i) Local Fine Sand within grading zone IV item code 240 M3 Excess(+) Full Conversion INR

241 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item code 241 EA Excess(+) Full Conversion INR

242 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve item code 242

243 iii) S/I Screwed type GM Ball Valve of 50 mm dia item code 243 EA Excess(+) Full Conversion INR

244 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein item code 244

245 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein item code 245 EA Excess(+) Full Conversion INR

246 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. item code 246

247 i) Making Flange joint between Slip on,blind and flange etc.of 100mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding item code 247 EA Excess(+) Full Conversion INR

248 Supplying and installation of the following threaded coupling item code 248

249 i) 80 mm dia Aluminium camlock coupling - Male only item code 249 EA Excess(+) Full Conversion INR

250 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. item code 250

251 i) Supply & installation of U type CS bend on vent pipe of 80 mm dia item code 251 EA Excess(+) Full Conversion INR

252 Providing stainless steel wire mesh 32 SWG, 11 mesh per linear cm of of non corrosive metal in two layers on existing vent hoods ‘U’ type (on both ends) including brazing, etc. complete item code 252

253 i) 32SWG SS wire mesh both sides of existing U vent hood 80mm dia item code 253 EA Excess(+) Full Conversion INR

254 Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval. item code 254 EA Excess(+) Full Conversion INR

255 Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping item code 255

256 ii) S/L Welded U/G HD MS Pipes of 80mm dia with fittings,doping item code 256 M- Excess(+) Full Conversion INR

257 iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping item code 257 M- Excess(+) Full Conversion INR

258 iii) S/L Threaded A/G HD MS Pipes of 50 mm dia with fittings,Painting item code 258 M- Excess(+) Full Conversion INR

259 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item code 259 M2 Excess(+) Full Conversion INR

260 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item code 260 M2 Excess(+) Full Conversion INR

261 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item code 261 KG Excess(+) Full Conversion INR

262 Providing and fixing of lifting handle foot lever for use with flat sealed cover and trench panels of OPW Fiberlite or equivalent make make as per specification and direction of Engineer in charge. item code 262 EA Excess(+) Full Conversion INR

263 CONSTRUCTION OF PUMP ISLAND & DU INSTALLATION item code 263

264 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item code 264

265 xi) MPD/MPP pumps upto 2 nos., 0-30 Km item code 265 LS Excess(+) Full Conversion INR

266 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km item code 266 KM Excess(+) Full Conversion INR

267 vii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km item code 267 LS Excess(+) Full Conversion INR

268 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km item code 268 KM Excess(+) Full Conversion INR

269 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump item code 269

270 i) 2 product - 4 nozzle MPPs/MPDs item code 270 EA Excess(+) Full Conversion INR

271 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge item code 271 EA Excess(+) Full Conversion INR

272 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 272

273 i) All kinds of Soil item code 273 M3 Excess(+) Full Conversion INR

274 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 274

275 i) Local Fine Sand within grading zone IV item code 275 M3 Excess(+) Full Conversion INR

276 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 276 M2 Excess(+) Full Conversion INR

277 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 277

278 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item code 278 M3 Excess(+) Full Conversion INR

279 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item code 279 M3 Excess(+) Full Conversion INR

280 Centering and shuttering including strutting, propping etc. and removal of form for : item code 280

281 i) Foundations,footings,bases of columns, etc. for mass concrete item code 281 M2 Excess(+) Full Conversion INR

282 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 282

283 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item code 283 M3 Excess(+) Full Conversion INR

284 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item code 284 M2 Excess(+) Full Conversion INR

285 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 285

286 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item code 286 M2 Excess(+) Full Conversion INR

287 Supplying and fixing of 10mm thick mirror polished black granite tiles for pump island edges etc. over 12mm thick CM 1:4 including cost of all materials and labour etc. complete. item code 287 M2 Excess(+) Full Conversion INR

288 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 288

289 iii) 3 Core x 1.5 sq. mm. (copper) item code 289 M- Excess(+) Full Conversion INR

290 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 290 M- Excess(+) Full Conversion INR

291 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 291

292 vi) 3 Core x 1.5 sq. mm. item code 292 EA Excess(+) Full Conversion INR

293 vii) 3 Core x 2.5 sq. mm item code 293 EA Excess(+) Full Conversion INR

294 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item code 294

295 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item code 295 M- Excess(+) Full Conversion INR

296 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings. item code 296

297 iii) 500VA CVT item code 297 EA Excess(+) Full Conversion INR

298 iv) 5KVA stabilizer item code 298 EA Excess(+) Full Conversion INR

299 PROVIDING INTERNAL WIRING item code 299

300 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item code 300 EA Excess(+) Full Conversion INR

301 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item code 301 EA Excess(+) Full Conversion INR

302 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box of following size with door and locking arrangement with lock and key. Box to be mounted on ISA 40x40x5 (Painted with black synthetic enamel paint) frame having 2 legs of length 800 mm (500 mm above ground and 300 mm below ground which is to be grouted with PCC 1:2:4). Bottom of box should have opening for incoming earth GI strips all complete, as per specification and direction of Engineer-in-charge. Note: EARTHING BOX in RED should be boldly written over the box. The box should have a hood at the top extending outwards such that no water should seep through inside the box during rainy season to avoid rusting. item code 302

303 i) 450 X 300 X 250 mm item code 303 EA Excess(+) Full Conversion INR

304 i) 50 x 10mm G.I. Strip item code 304 M- Excess(+) Full Conversion INR

305 ii) 32 x 6 mm G.I.strip item code 305 M- Excess(+) Full Conversion INR

306 v) 25 x 3 mm GI strip item code 306 M- Excess(+) Full Conversion INR

307 PROVISION OF ELECTRIC PANEL & ALLIED ELECTRICAL WORKS item code 307

308 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. item code 308

309 Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. item code 309 EA Excess(+) Full Conversion INR

310 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 310

311 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item code 311 M- Excess(+) Full Conversion INR

312 PROVIDING INTERNAL WIRING item code 312

313 i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item code 313 EA Excess(+) Full Conversion INR

314 Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete. item code 314

315 i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. item code 315 M- Excess(+) Full Conversion INR

316 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item code 316

317 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item code 317 M- Excess(+) Full Conversion INR

318 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item code 318 M- Excess(+) Full Conversion INR

319 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item code 319 M- Excess(+) Full Conversion INR

320 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item code 320 M- Excess(+) Full Conversion INR

321 SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. item code 321

322 iii) 4 module frame item code 322 EA Excess(+) Full Conversion INR

323 viii) 15 A Modular switch item code 323 EA Excess(+) Full Conversion INR

324 xi) 2 Pin Telephone Modular Socket item code 324 EA Excess(+) Full Conversion INR

325 xii) Fan Regulator of stepped modular type item code 325 EA Excess(+) Full Conversion INR

326 Supply and Installation of Flame Proof ESD Push Button item code 326 EA Excess(+) Full Conversion INR

327 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: item code 327

328 iii) 1200 mm sweep item code 328 EA Excess(+) Full Conversion INR

329 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). item code 329

330 ii) 9" dia light duty, make Khaitan or equivalent item code 330 EA Excess(+) Full Conversion INR

331 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works: item code 331

332 iii) Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works item code 332 EA Excess(+) Full Conversion INR

333 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) item code 333 EA Excess(+) Full Conversion INR

334 Supplying and fixing of MV Lightining Arrestor horn gap type as required item code 334 EA Excess(+) Full Conversion INR

335 Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job) item code 335 EA Excess(+) Full Conversion INR

336 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc item code 336

337 i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. item code 337 M2 Excess(+) Full Conversion INR

338 iv) 11 KV grade hand gloves, ISI mark item code 338 EA Excess(+) Full Conversion INR

339 Formation of lighting protection arrangement with supply of 1.0 M height spike and erection at top most portion of structure/building and connecting the same to earthpit by 40x6mm GI strip (excluding supply and laying of GI strip) item code 339 EA Excess(+) Full Conversion INR

340 SUPPLY AND INSTALLATION OF YARD LIGHTS item code 340

341 Supply & laying of Heavy Duty type, High compression strength, IP 67 rated (DWC) Double wall corrugated HDPE Conduits as per IS:14930/ IS:16205. Laying includes with GI pull wires inside the conduits & necessary ends to be filled with sealants, of all complete and as per drawing & specification. item code 341

342 ii) 63 mm OD / 50 mm ID item code 342 M- Excess(+) Full Conversion INR

343 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item code 343

344 iv) Pipes, Cable etc. > 80mm < 300m dia item code 344 M- Excess(+) Full Conversion INR

345 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item code 345 EA Excess(+) Full Conversion INR

346 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 346

347 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 347 M- Excess(+) Full Conversion INR

348 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item code 348 M- Excess(+) Full Conversion INR

349 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 349

350 vii) 3 Core x 2.5 sq. mm item code 350 EA Excess(+) Full Conversion INR

351 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item code 351

352 v) 25 x 3 mm GI strip item code 352 M- Excess(+) Full Conversion INR

353 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : item code 353

354 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item code 354 EA Excess(+) Full Conversion INR

355 iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item code 355 EA Excess(+) Full Conversion INR

356 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. item code 356

357 ii) S/E Arm " Y " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge item code 357 EA Excess(+) Full Conversion INR

358 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. item code 358

359 i) "Y" Pole item code 359 EA Excess(+) Full Conversion INR

360 ii) "L" Pole item code 360 EA Excess(+) Full Conversion INR

361 Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item code 361 EA Excess(+) Full Conversion INR

362 i) All kinds of Soil item code 362 M3 Excess(+) Full Conversion INR

363 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item code 363 M2 Excess(+) Full Conversion INR

364 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 364

365 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item code 365 M3 Excess(+) Full Conversion INR

366 Centering and shuttering including strutting, propping etc. and removal of form for : item code 366

367 i) Foundations,footings,bases of columns, etc. for mass concrete item code 367 M2 Excess(+) Full Conversion INR

368 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 368

369 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 369 KG Excess(+) Full Conversion INR

370 STANDARD DISPLAY BOARD-EGRESS SIDE item code 370

371 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 371

372 i) All kinds of Soil item code 372 M3 Excess(+) Full Conversion INR

373 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item code 373 M3 Excess(+) Full Conversion INR

374 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying & curing, excluding the cost of centering, shuttering finishing including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge, ALL WORKS UPTO PLINTH LEVEL. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. item code 374

375 i) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum item code 375 M3 Excess(+) Full Conversion INR

376 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 376

377 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item code 377 M3 Excess(+) Full Conversion INR

378 Centering and shuttering including strutting, propping etc. and removal of form for : item code 378

379 i) Foundations,footings,bases of columns, etc. for mass concrete item code 379 M2 Excess(+) Full Conversion INR

380 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 380

381 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 381 KG Excess(+) Full Conversion INR

382 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item code 382

383 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item code 383 EA Excess(+) Full Conversion INR

384 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 384

385 i) Hot finished welded type tubes item code 385 KG Excess(+) Full Conversion INR

386 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item code 386

387 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item code 387 KG Excess(+) Full Conversion INR

388 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item code 388 M2 Excess(+) Full Conversion INR

389 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 389

390 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 390 M- Excess(+) Full Conversion INR

391 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item code 391

392 i) Pipes,cables etc. not exceeding 80mm dia item code 392 M- Excess(+) Full Conversion INR

393 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 393

394 vii) 3 Core x 2.5 sq. mm item code 394 EA Excess(+) Full Conversion INR

395 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item code 395

396 i) for 2.5 sq.mm. cable entry size with 9 terminals item code 396 EA Excess(+) Full Conversion INR

397 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item code 397

398 ii) 2+8 way SPN item code 398 EA Excess(+) Full Conversion INR

399 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 399

400 ii) Upto 32A DP MCB item code 400 EA Excess(+) Full Conversion INR

401 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item code 401 EA Excess(+) Full Conversion INR

402 STANDARD DISPLAY BOARD-INGRESS SIDE item code 402

403 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item code 403

404 i) All kinds of Soil item code 404 M3 Excess(+) Full Conversion INR

405 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item code 405 M3 Excess(+) Full Conversion INR

406 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying & curing, excluding the cost of centering, shuttering finishing including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge, ALL WORKS UPTO PLINTH LEVEL. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. item code 406

407 i) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum item code 407 M3 Excess(+) Full Conversion INR

408 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 408

409 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item code 409 M3 Excess(+) Full Conversion INR

410 Centering and shuttering including strutting, propping etc. and removal of form for : item code 410

411 i) Foundations,footings,bases of columns, etc. for mass concrete item code 411 M2 Excess(+) Full Conversion INR

412 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 412

413 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item code 413 KG Excess(+) Full Conversion INR

414 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item code 414

415 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item code 415 EA Excess(+) Full Conversion INR

416 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 416

417 i) Hot finished welded type tubes item code 417 KG Excess(+) Full Conversion INR

418 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item code 418

419 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item code 419 KG Excess(+) Full Conversion INR

420 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item code 420 M2 Excess(+) Full Conversion INR

421 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 421

422 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item code 422 M- Excess(+) Full Conversion INR

423 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item code 423

424 i) Pipes,cables etc. not exceeding 80mm dia item code 424 M- Excess(+) Full Conversion INR

425 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 425

426 vii) 3 Core x 2.5 sq. mm item code 426 EA Excess(+) Full Conversion INR

427 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item code 427

428 i) for 2.5 sq.mm. cable entry size with 9 terminals item code 428 EA Excess(+) Full Conversion INR

429 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 429

430 ii) Upto 32A DP MCB item code 430 EA Excess(+) Full Conversion INR

431 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item code 431 EA Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information