Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.4 L
EMD Value
₹58,800
Closing Date
10 Feb 2026, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Narender Kumar Payal
Construction Division-II
Special repair of Green Belt Sector-21 along National Highway Panchkula .Construction of Toe wall and Providing and fixing of fencing of weld mesh galvanized powder coated fence 1500 (5 ft height) with all fitting from village Maheshpur (Goga madi)
2026_HRY_499849_1
20260A109300 65E3 4EB3 AF89 4182EB6540D12239003
Open Tender
Civil Works
Works
180 days
Panchkula
2 documents required · 2 mandatory
₹1,000
₹58,800
Yes
30 Jan 2026
30 Jan 2026
10 Feb 2026
30 Jan 2026
10 Feb 2026
30 Jan 2026
30 Jan 2026 - 1 Feb 2026
[1.PM026] PM026. Tractor with trolley [Rate]
[10.7]Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 [Through Rate]
[11.25.2]Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 2. Raised and cut pointing [Through Rate]
[11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate]
[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]
[14.51.2]Hire charges for Hydraulic excavator/Loader like JCB/Pock lain, Hitachi etc with all accessories having bucket capacity 2. Hire Charges for excavator 0.40 to 0.75 cum bucket capacity [Through rate]
[34.50]Painting on Steel Surfaces Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade [Through Rate]
[4.1]Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. [Through Rate]
[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]
[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate]
[6.2.2]Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 2. 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]
[7.21.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]
[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]
Providing and fixing of RCC poles having size 0.10 x 0.10 m at base and top, 2.1 m high with 4 no MS bars (4 No 10mm dia) , 10 No 6mm dia MS Rings including painting the RCC pole, cost of excavation and CC Block 1:2:4 of size 0.45 x 0.45 x 0.45 mm and fixing at site complete in all respects as per satisfaction of EIC.
` Providing and Fixing 1.8 m high GI Barbed wire fencing with 5 No horizontal wires on existing RCC Poles fixed with GI staples, turn buckles etc complete in all respects as per satisfaction of EIC `
Detail for Fence Panel Size 1524 x 2500 mm, Detail for Fence post Size 60 x 60 x 2000 mm with anchorrod Nos of post sin 1 km = (1000/2.5) plus 1 = 401 nos Nos of anchorrods in 1 km = 401, Detail of Square clamp with Stainless steel Mushroom Head bolt andante the ft nut., Detail for Galvanizing of Metal, Detail for Powder coating of Metal, Welding by gas or electric plant including transportation of plant site complete, Cost of Concrete Block for fixing of each fence post Using M 20 Grade of concrete., Detail of Shuttering for casting CC blocks. complete in all respect.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_578447.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .