RENOVATION AND ADDITIONAL FACILITIES PROVIDING PAVER BLOCK ARRANGEMENTS TO THE OHT AT HASTHAMPATTY IN DIVISION No. 13, ZONE-II, IN SALEM CORPORATION.

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Pressed tiles & weathering course clearing and levelling away from the site, etc., complete complying with standard specification.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

In foundation and basement

In First floor

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying and fixing of M.S.Grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and laying Rubber moulded Hydraulic pressed Paver Block of 63mm thick approved design made out of 6 - 10mm thick HBGS chips in cm 1:2:4 properly occurred to attain the required strength laying the Rubber Moulded Paver Block over a sand cushion of 10cm thick and well compacted using 1-3 tonne capacity of manufacturing the inter locking blocks , loading, transportation , unloading and other incidential charges etc. complete complying with standard specification

Supply of Office Executive chair with arms following specification. The outer frames are made out of 20mm dia SS tubes, back rest with fabric finish and seat with cushion and arms are made out of PVC The cost is inclusive of materials, furniture fittings, labour, loading, unloading and conveyance charges etc.,, complete and as directed by the departmental officers.

Supply of office Table of size 1830x760x780mm with vertical enclosure on one side including a side table 900 x 460 x 780mm with cupboard arrangements. CPU tray arrangement, keyboard tray arrangement The rate is inclusive of all materials, labour charges, loading, transportation charges to site and unloading etc.,, complete and as directed by the departmental officers.

A Annadurai (BID ID -1418700)