Maintenance work

Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Paving the floor with best quality double charged vitrified Tiles of size 600x600x8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing the WPC door shutter with frame using 75mmx40mm solid outer frames, its covered with 25mm thick solid PVC sheets for shutter paneelling shall rigidly fixed in position, The rate includes for transport, fixing with necessary furniture fitting such as 3 nos 4" Stainless steel butt hinges, 2nos 6" Stainless steel tower bolts,2nos 4" Stainless handle, etc., complete complying with standard specification.Thickness: 25mm thick

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed interior Emulsion paint with thorough scraping of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Repainting old wood work with two coats of best synthetic enamel paint of approved quality and colour including ordinary scrapping and preparation of surfaces the rate includes the cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with std. specification (The make quality and colour of paint should be got approved by the EE before use on works)

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Best Varnishing Woodwork two Coats of approved quality in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality of paint should be got approved by the Executive Engineer before use on works.)

Collecting the scattered debries using tipper machinery from work spot and loading into the tipper lorry and conveying away the same to outside by lorry to a lead of 3km entirely with in city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. (200 cft volume capacity)

Please Enable Macros to View BoQ information