CONSTRUCTION OF NEW CRICKET STADIUM AT GOVT. COLLEGE OF EDUCATION (B.Ed) IN JALANDHAR UNDER MPLADs SCHEME

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR CONSTRUCTION OF CRICKET STADIUM GROUND IN BACKSIDE B.Ed JALANDHAR UNDER MPLADS SCHEME.

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 i) CIVIL WORKS:- 2 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

2 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical clause 201 of MORT&H specifications 3 Hactare Excess(+) Full Conversion INR

3 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. 4 Cum Excess(+) Full Conversion INR INR Five Thousand Six Hundred & Thirty Six Only

4 Cement concrete 1:8:16 With stone aggregates 40mm gauge by mechanical means using concrete mixer volumetric type 5 Cum Excess(+) Full Conversion INR INR Seventy Three Thousand One Hundred & Ninety Six Only

5 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth 6 Cum Excess(+) Full Conversion INR INR Two Lakh Sixty Three Thousand Two Hundred & Forty Nine Only

6 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 7 Cum Excess(+) Full Conversion INR INR Two Lakh Fifty Five Thousand Six Hundred & Twenty Eight Only

7 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 8 0.999 Qtl Excess(+) Full Conversion INR INR Seven Lakh Seventeen Thousand Nine Hundred & Forty One Only

8 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering ) 9 Sqm Excess(+) Full Conversion INR INR Thirteen Thousand Eight Hundred & Ninety Four Only

9 Centering and shuttering for columns (Square or ractangular or poly gonal in plain) 10 Sqm Excess(+) Full Conversion INR INR Forty One Thousand Six Hundred & Nine Only

10 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 11 Sqm Excess(+) Full Conversion INR INR Thirty Four Thousand One Hundred & Forty Only

11 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 12 Sqm Excess(+) Full Conversion INR INR Ninety Three Thousand Two Hundred & Sixteen Only

12 First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth 13 Cum Excess(+) Full Conversion INR INR One Lakh Seventy One Thousand One Hundred & Forty Three Only

13 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level 14 Cum Excess(+) Full Conversion INR INR Two Lakh Sixty Six Thousand One Hundred & Twelve Only

14 115 mm thick brick wall laid in cement mortor 1:4 without reinforcement in super structure. 15 Sqm Excess(+) Full Conversion INR INR Twenty Eight Thousand Four Hundred & Fifty Six Only

15 12.5 mm thick cement plaster 1:5 16 Sqm Excess(+) Full Conversion INR INR Forty Nine Thousand &Ninety Nine Only

16 12.5mm th C plaster in CM 1:4 17 Sqm Excess(+) Full Conversion INR INR Fifty One Thousand Two Hundred & Twenty Three Only

17 20mm thick cement plaster 1:5 in two coat work 18 Sqm Excess(+) Full Conversion INR INR Twenty Five Thousand &Sixty Eight Only

18 20mm thick cement plaster 1:4 in two coat work 19 Sqm Excess(+) Full Conversion INR INR Twenty Six Thousand Three Hundred & Fifty Six Only

19 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing 20 Sqm Excess(+) Full Conversion INR INR One Lakh Fifteen Thousand One Hundred & Seventy Nine Only

20 Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified 21 Rmt Excess(+) Full Conversion INR INR Three Thousand Five Hundred & Forty Nine Only

21 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 22 Each Excess(+) Full Conversion INR INR Four Hundred & Twenty Five Only

22 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) 23 Rmt Excess(+) Full Conversion INR INR Four Thousand One Hundred & Seventy Two Only

23 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. 24 Each Excess(+) Full Conversion INR INR One Thousand One Hundred & Thirty Eight Only

24 Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge 25 Each Excess(+) Full Conversion INR INR Seven Hundred & Eight Only

25 Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 26 Each Excess(+) Full Conversion INR INR Three Thousand Three Hundred Only

26 Earth filling under floors with surplus ordinary soil or soil containing gravel or premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres 27 Cum Excess(+) Full Conversion INR INR Six Lakh Nine Thousand Eight Hundred & Fifty Only

27 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 28 Cum Excess(+) Full Conversion INR INR Four Thousand One Hundred & Seventy Seven Only

28 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 29 Sqm Excess(+) Full Conversion INR INR Sixty Eight Thousand Nine Hundred & Eighty Seven Only

29 Marble stone Flooring with 18-20 mm thick marble stone,as per sample of marble approved by Engineer-in-Charge over 20 mm (average)thick base of cement mortar1:4 (1 Cement:4 Coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with Udaipur Green Marble Tiles of Thickness 18 to 20 mm Slab Sizes above 0.50 sqm 30 Sqm Excess(+) Full Conversion INR INR Thirty Three Thousand Four Hundred & Eighty Three Only

30 Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and c onforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). 31 Sqm Excess(+) Full Conversion INR INR One Lakh Twenty Two Thousand Six Hundred & Eighty Seven Only

31 Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. 32 Sqm Excess(+) Full Conversion INR INR Fourteen Thousand Four Hundred & Thirty Three Only

32 Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. 33 Rmt Excess(+) Full Conversion INR INR Thirty Six Thousand One Hundred & Eighty Four Only

33 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash-welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 34 Kg Excess(+) Full Conversion INR INR Twenty Thousand Four Hundred & Thirty Nine Only

34 Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect 35 Rmt Excess(+) Full Conversion INR INR Two Thousand &Fifteen Only

35 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 36 Qtl Excess(+) Full Conversion INR INR Twenty One Thousand Nine Hundred & Twenty Two Only

36 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area. 37 Sqm Excess(+) Full Conversion INR INR Seven Thousand Nine Hundred Only

37 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) a) For fixed portion and chawkhats 38 Kg Excess(+) Full Conversion INR INR One Lakh Five Thousand Nine Hundred & Twenty Eight Only

38 For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required 39 Kg Excess(+) Full Conversion INR INR Sixty Thousand Two Hundred & Forty Seven Only

39 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one sides. 40 Sqm Excess(+) Full Conversion INR INR Nine Thousand Eight Hundred & Twenty Only

40 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) 41 Sqm Excess(+) Full Conversion INR INR Thirty Eight Thousand Three Hundred & Thirty Two Only

41 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x 16 mm 42 Each Excess(+) Full Conversion INR INR Eight Hundred & Thirty Nine Only

42 Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. 43 Kg Excess(+) Full Conversion INR INR Thirty One Thousand Five Hundred & Ninety Seven Only

43 Factory manufactured solid flush door fixed in position iron hinges, etc . (excluding the cost of any fittings other than specified above but including the labour for fxing the same in position a) comercial with elm or gujan facing on both/sides with laminated core and lipped edges. iv) 35mm thick. 44 Sqm Excess(+) Full Conversion INR INR Twenty Four Thousand Three Hundred & Seventy Seven Only

44 Providing & Fixing decorative laminated sheet 0.72mm thick and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 45 Sqm Excess(+) Full Conversion INR INR Seventeen Thousand Four Hundred & Ninety Eight Only

45 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area up to 0.50 sqm 46 Sqm Excess(+) Full Conversion INR INR One Thousand One Hundred & Seventy Three Only

46 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 47 Sqm Excess(+) Full Conversion INR INR Fifty Eight Thousand Three Hundred & Fifteen Only

47 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 48 Sqm Excess(+) Full Conversion INR INR Thirty Nine Thousand Eight Hundred & Eight Only

48 Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 49 Sqm Excess(+) Full Conversion INR INR Twenty Three Thousand Seven Hundred & Seventy Eight Only

49 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 50 Sqm Excess(+) Full Conversion INR INR One Thousand One Hundred & Twenty Six Only

50 Dismantling brick work tile, masonry or tile lining (b) In cement 51 Cum Excess(+) Full Conversion INR

51 Stripping and stacking slate or tiles of a roof. 52 Sqm Excess(+) Full Conversion INR INR Two Thousand One Hundred & Fifty Three Only

52 2nd Class mud Roofing 53 Sqm Excess(+) Full Conversion INR INR Twenty Nine Thousand Four Hundred & Ninety Five Only

53 Dismantling of RCC slab 54 Cum Excess(+) Full Conversion INR INR Thirteen Thousand Seven Hundred & Ninety Two Only

54 Dismantling of CC flooring 55 Sqm Excess(+) Full Conversion INR INR Two Thousand Seven Hundred & Eighty Nine Only

55 Removing of doors 56 Each Excess(+) Full Conversion INR INR Four Hundred & Seventy Only

56 Removing of Windows 57 Each Excess(+) Full Conversion INR INR Two Hundred & Ninety Nine Only

57 Disposal of malba including loading and unloading 58 Cum Excess(+) Full Conversion INR INR Nine Thousand Two Hundred & Twenty Two Only

58 Credit of Old Material 59

59 Credit of Old Bricks 60 Each Excess(+) Full Conversion INR

60 Credit of Old Brick tiles 61 Each Excess(+) Full Conversion INR INR Minus Six Thousand One Hundred & Eighty Seven Only

61 Credit of Brick bats 62 cum Excess(+) Full Conversion INR INR Minus Five Thousand Three Hundred & Seventy Six Only

62 Credit of old steel 63 Kg Excess(+) Full Conversion INR INR Minus Eight Thousand &Twenty Three Only

63 Credit of Old doors as fuel wood 64 Each Excess(+) Full Conversion INR INR Minus One Thousand Only

64 Credit of Old windows as fuel wood 65 Each Excess(+) Full Conversion INR INR Minus One Thousand Only

65 ii) PUBLIC HEALTH WORK:- 66 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

66 Sub Head-1 Internal Water Supply System 67 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

67 CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 68 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

68 b) CPVC SDR 11 Pipe & fitting 20m mo/d 69 Mtr Excess(+) Full Conversion INR INR Four Thousand One Hundred & Ninety Seven Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

69 c) c CPVC SDR 11 Pipe & fitting 25mmo/d 70 Mtr Excess(+) Full Conversion INR INR Eighteen Thousand &Sixty Two Only

70 d) c CPVC SDR 11 Pipe & fitting 32mmo/d 71 Mtr Excess(+) Full Conversion INR INR Seven Thousand Two Hundred & Fifty One Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

71 e) cCPVC SDR 11 Pipe & Fitting 40 mm o/d 72 Mtr Excess(+) Full Conversion INR INR Ten Thousand Six Hundred & Forty Six Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

72 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm 73 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

73 qty same as CPVC P 20mm +25 mm 74 mtr Excess(+) Full Conversion INR INR Five Thousand Six Hundred & Seventy Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

74 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 75 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

75 Through wall 11.43 cm thick 76 nos Excess(+) Full Conversion INR INR One Thousand Five Hundred & Eighty Eight Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

76 Through wall 22.86 cm thick 77 nos Excess(+) Full Conversion INR INR One Thousand Five Hundred & Ten Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

77 Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 78 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

78 25mm i/d Brass Ball valves 79 4 Each Excess(+) Full Conversion INR INR Two Thousand Two Hundred & Twenty Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

79 32mm i/d Brass Ball valves 80 3 Each Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Eighty Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

80 40mm i/d Brass Ball valves 81 1 Each Excess(+) Full Conversion INR INR One Thousand One Hundred & Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

81 Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. 82 1 Each Excess(+) Full Conversion INR INR Three Hundred & Ninety Five Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

82 Sub Head-2 Internal Sewerage System 83 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

83 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 84

84 Single Socket Type B 85

85 b) 110mm o/d SWR UPVC pipe lines laid complete 86 Mtr Excess(+) Full Conversion INR INR Twenty Nine Thousand Seven Hundred & Twelve Only

86 Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects 87 Each Excess(+) Full Conversion INR INR Two Thousand Three Hundred & Thirty Two Only

87 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 88

88 For 110mm o/d pipes 89

89 ii) Single Tee With Door 90 Each Excess(+) Full Conversion INR

90 v) Elbow 90 Degree (all side socketed) 91 Each Excess(+) Full Conversion INR INR Nine Hundred & Seventy Five Only

91 vi) Vent Cowls 92 Each Excess(+) Full Conversion INR INR Six Hundred & Thirty Six Only

92 viii) Coupler 93 Each Excess(+) Full Conversion INR INR One Thousand Six Hundred & Sixty Six Only

93 ix) P Trap/Floor Trap 110mm x 110mm 94 Each Excess(+) Full Conversion INR INR Three Thousand Three Hundred & Eighty Four Only

94 xi) Single Y-Junction 95 Each Excess(+) Full Conversion INR INR Three Thousand Five Hundred & Ninety Eight Only

95 Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) 96

96 110mm o/d 97 50 Nos Excess(+) Full Conversion INR INR Five Thousand &Sixty Four Only

97 Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. . 98

98 M.S. Holder bats clamps for 100mm i/d H.C.I. pipes 99 Nos Excess(+) Full Conversion INR INR Three Thousand Two Hundred & Fifty Eight Only

99 Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm 100

100 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm 101 Nos Excess(+) Full Conversion INR INR Five Thousand Seven Hundred & Ninety Only

101 Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming toI.S.I complete as per standard design. 102

102 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal 103 Nos Excess(+) Full Conversion INR INR Thirty Five Thousand &Thirty Four Only

103 Cement concrete 1:2:4 104

104 a With stone ballast or shingle 105

105 mixing by mechanical means using concrete mixer volumetric type 106 cum Excess(+) Full Conversion INR INR Twenty Four Thousand Six Hundred & Twenty Six Only

106 Sub Work-3 Civil work, Flooring and Wall Tile 107

107 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 108 Sqm Excess(+) Full Conversion INR INR Twenty Thousand One Hundred & Sixty Seven Only

108 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 109 10 Sqm Excess(+) Full Conversion INR INR Twenty Five Thousand One Hundred & Eighty One Only

109 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 110 Sqm Excess(+) Full Conversion INR INR One Lakh Eighteen Thousand Nine Hundred & Eighty Only

110 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 111 Sqm Excess(+) Full Conversion INR INR Thirty Three Thousand Six Hundred & Twenty Eight Only

111 Sub Head-4 Sanitary Installation 112

112 Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked,PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge 113 Each Excess(+) Full Conversion INR INR Ten Thousand &Seventy One Only

113 Providing and fixing jet spray with 2'-6" long PVC pipe 114

114 With C.P. Brass nut 115 Each Excess(+) Full Conversion INR INR One Thousand &Three Only

115 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. 116

116 Size 550 mm 400 mm x 815 mm 117 Each Excess(+) Full Conversion INR INR Fifteen Thousand Two Hundred & Twenty Nine Only

117 Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. 118

118 Vitreous chinaware standard white pedestal for wash hand basin. 119 Each Excess(+) Full Conversion INR INR Eight Thousand Four Hundred & Seventy Only

119 Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) 120 Each Excess(+) Full Conversion INR INR Three Thousand Nine Hundred & Forty Only

120 Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. 121 Each Excess(+) Full Conversion INR INR Two Thousand Two Hundred & Eighty Four Only

121 Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. 122

122 C.P brass towel ring 123 Each Excess(+) Full Conversion INR INR Five Thousand Seven Hundred & Fifty Eight Only

123 C.P. brass towel Rails size 15mm dia 610mm long 124 Each Excess(+) Full Conversion INR INR Nine Thousand Seven Hundred & Twenty Eight Only

124 Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect 125 Each Excess(+) Full Conversion INR INR Five Thousand Three Hundred & Twenty Nine Only

125 Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) 126

126 Size 550mmx400mm 127 Each Excess(+) Full Conversion INR INR Four Thousand Seven Hundred & Three Only

127 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect 128

128 C.P. brass Bib cock long nose/long body foam flow without flange 129 3 Each Excess(+) Full Conversion INR INR Three Thousand Six Hundred & Forty Four Only

129 C.P. brass Bib cock foam flow without flange 130 3 Each Excess(+) Full Conversion INR INR Two Thousand Eight Hundred & Ninety Eight Only

130 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect 131

131 PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut 132 Each Excess(+) Full Conversion INR INR Three Thousand Eight Hundred & Thirty Five Only

132 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. 133 Each Excess(+) Full Conversion INR INR One Thousand One Hundred & Ninety One Only

133 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect 134

134 C.P.brass 15mm Concealed stop cock with flange. 135 Each Excess(+) Full Conversion INR INR Two Thousand Five Hundred & Thirty Seven Only

135 C.P.brass 15mm Angle valve without flange 136 Each Excess(+) Full Conversion INR INR Six Thousand Nine Hundred & Sixty Two Only

136 Providing and fixing in position automatic brass Ball Cock intanks. iii)25mm i/d 137 Each Excess(+) Full Conversion INR INR Two Thousand Eight Hundred & Fifty Three Only

137 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 138 Each Excess(+) Full Conversion INR INR One Thousand Five Hundred & Twenty Seven Only

138 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. 139

139 C.P. Brass extension piece, 25mm long to 50mm long 140 Each Excess(+) Full Conversion INR

140 Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. 141 litres Excess(+) Full Conversion INR INR Twenty Two Thousand Seven Hundred & Sixty Only

141 Construction of Plateform complete as per specification & as desired by Enginer-in-charge 142 Nos Excess(+) Full Conversion INR INR Eighteen Thousand Seven Hundred & Ninety Eight Only

142 Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. 143 3 Each Excess(+) Full Conversion INR INR Two Hundred & Sixty Two Only

143 Supply and Erection of Heavy Duty Exhaust Fan (HDEF ) (300mm-900RPM) Single Phase Of make Crompton Model EXHD300-6-1 or its Equivalent Make Havells turbo Force SP/Orient (12" H.D. EX ) ISI Marked Heavy Duty Motor With die Cast Aluminium Motor Mounted On Two Ball Bearing including Erection, Connections and louver Shutter Complete In all Respects 144 2 Each Excess(+) Full Conversion INR INR Eight Thousand Five Hundred & Forty Five Only

144 Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. 145 6 Each Excess(+) Full Conversion INR INR Forty One Thousand Four Hundred & Nine Only

145 Providing and fixing partition for different type of urinals. 146

146 Vitreous white Chinaware Partition ii) Large partition size 75 x 16.5 x 36.5 cm 147 6 Each Excess(+) Full Conversion INR INR Twenty Nine Thousand Four Hundred & Five Only

147 Providing and installing in position of domestic water pressure boosting pump of approved make (To the approval of Engineer- in-charge) including all pump accessaries but excluding cost of G.I pipe & specials complete in all respects. 148

148 Pressure pump of 0.5 HP with 2700 LPH, 35meter head with C.I pump & 19 litre capacity Tank 149 2 Each Excess(+) Full Conversion INR INR Thirty Nine Thousand One Hundred & Seventy Nine Only

149 Providing and fixing Stainless steel health faucet complete in all respect. 150 2 Each Excess(+) Full Conversion INR INR Two Thousand Three Hundred & Forty Nine Only

150 Providing and fixing divertors of approved make (to the approval of Engineer-in-charge 151

151 Single lever concealed divertor of bath and shower system (with body and upper part) 152 2 Each Excess(+) Full Conversion INR INR Nine Thousand Six Hundred & Fifty Eight Only

152 Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer- in-charge) complete in all respect. 153

153 CP Brass rain Fall Shower without arm 8" round 154 2 Each Excess(+) Full Conversion INR INR Four Thousand Three Hundred & Forty Seven Only

154 Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. 155

155 CP Brass rain Fall Shower arm 15" length square chrome 156 2 Each Excess(+) Full Conversion INR INR Three Thousand One Hundred & Thirty Three Only

156 Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. 157

157 Aluminium khunti with 6 pegs 158 2 Each Excess(+) Full Conversion INR INR Five Hundred & Forty Two Only

158 Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. 159

159 25 litre capacity water heater 160 2 Each Excess(+) Full Conversion INR INR Eighteen Thousand Six Hundred & Forty Eight Only

160 Providing & Fixing in postion CP Brass bath tub spout with wall flange of approved make (to the approval of Engineer-in-charge) complete in all respect. 161 2 Each Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Forty Nine Only

161 Sub Head -5 Water Cooler 162

162 Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. 163

163 Water Cooler semi Steel Body 80/120 ltr Capacity without Stablizer 164 1 Each Excess(+) Full Conversion INR INR Thirty Seven Thousand Five Hundred & Ninety One Only

164 AUTOMATIC VOLTAGE STABLIZER: 165

165 Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- 166

166 Automatic Voltage Stablizer 2 KVA 167 1 Each Excess(+) Full Conversion INR INR Three Thousand Eight Hundred & Fifty Three Only

167 Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect. 168 1 Each Excess(+) Full Conversion INR INR Forty Thousand Two Hundred & Twenty Seven Only

168 Estate Sewerage System 169

169 Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 170

170 160 mm i/d pipe 171 mtr. Excess(+) Full Conversion INR INR Sixty Two Thousand Six Hundred & Seventy Only

171 Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work 172 cum Excess(+) Full Conversion INR INR Six Thousand Five Hundred & Seven Only

172 Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer- in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. 173

173 For depths not exceeding 3.0 metre B.G.L. For all classes of soil except rocky 174 cum Excess(+) Full Conversion INR INR Three Thousand Seven Hundred & Ninety Five Only

174 Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda 175

175 Sewer connections upto 300 mm id 176 No Excess(+) Full Conversion INR INR Six Thousand Three Hundred & Eighty Four Only

176 Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design 177 No Excess(+) Full Conversion INR INR Twenty Three Thousand Five Hundred & Twenty Six Only

177 iii) ELECTRICAL WORK:- 178 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

178 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: 179

179 Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 180

180 Wiring fan point (With fan box) 181 Each Excess(+) Full Conversion INR INR Nine Thousand Six Hundred & Eighty Two Only

181 Wiring light point 182 Each Excess(+) Full Conversion INR INR Twenty Two Thousand Eight Hundred & Seventy Four Only

182 Wiring 6Amp. wall socket point 183 Each Excess(+) Full Conversion INR INR Two Thousand Four Hundred & Seventy Six Only

183 Wiring 6Amp. Plug control comprising wall socket point 184 Each Excess(+) Full Conversion INR INR One Thousand Four Hundred & Eighty Five Only

184 Wiring 16/20Amp. power plug control point 185 Each Excess(+) Full Conversion INR INR One Thousand Nine Hundred & Twelve Only

185 RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 186

186 Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 187

187 Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. 188 Each Excess(+) Full Conversion INR INR One Thousand Six Hundred & Fifty Four Only

188 PVC INSULATED FR COPPER CONDUCTOR CABLES: 189

189 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 190

190 Overall size 1.5sq.mm (Un-sheathed) 191 P.Mtr Excess(+) Full Conversion INR INR Two Thousand Seven Hundred & Thirty One Only

191 Overall size 2.5sq.mm (Un-sheathed) 192 P.Mtr Excess(+) Full Conversion INR INR Eight Thousand &Fifty Five Only

192 Overall size 4sq.mm (Un-sheathed) 193 P.Mtr Excess(+) Full Conversion INR INR Four Thousand &Seventy Six Only

193 XLPE INSULATED UN-ARMOURED CABLES (LOOSE): 194

194 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- 195

195 Overall size 16sq.mm (4Core) Un-armoured (Loose) 196 P.Mtr Excess(+) Full Conversion INR INR Twelve Thousand &Ten Only

196 XLPE INSULATED ARMOURED CABLES (ON SURFACE): 197

197 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- 198

198 Overall size 10sq.mm (2Core) Armoured (On-Surface) 199 P.Mtr Excess(+) Full Conversion INR INR Fifteen Thousand Seven Hundred & Sixty Three Only

199 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: 200

200 Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 201

201 Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 202 P.Mtr Excess(+) Full Conversion INR INR Six Thousand Three Hundred & Seventy Two Only

202 Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed) 203 P.Mtr Excess(+) Full Conversion INR INR Two Thousand Five Hundred & Sixty Six Only

203 G.I. EARTHING: 204

204 Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). 205

205 Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 14Metre in length) 206 Each Excess(+) Full Conversion INR INR Ten Thousand &Sixty One Only

206 G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (Flushed in wall and floor) with sockets, elbows and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface):- 207

207 Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (Flushed) 208 P.mtr Excess(+) Full Conversion INR INR Four Thousand Four Hundred & Fifty Four Only

208 MINIATURE CIRCUIT BREAKERS: 209

209 Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 210

210 MCB Single Pole 6-32amp. (10kA, Curve-C) 211 Each Excess(+) Full Conversion INR INR One Thousand Six Hundred & Ninety Four Only

211 MCB Double Pole 50, 63amp. (10kA, Curve-C) 212 Each Excess(+) Full Conversion INR INR Two Thousand &Sixty Seven Only

212 MCB Four Pole 50, 63amp. (10kA, Curve-C) 213 Each Excess(+) Full Conversion INR INR One Thousand Nine Hundred & Forty Five Only

213 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: 214

214 Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 215

215 TP&N Horizontal Double Door Distribution Board 4 way each 216 Each Excess(+) Full Conversion INR INR Two Thousand Nine Hundred & Fifteen Only

216 Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:- 217

217 Copper thimble cable Core size 4 - 6sq.mm 218 Each Excess(+) Full Conversion INR INR Two Hundred & Eighteen Only

218 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 219

219 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- 220

220 Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) 221 P.Mtr Excess(+) Full Conversion INR INR Nine Thousand Three Hundred & Sixty Five Only

221 SINGLE ARM BRACKETS FOR GI PIPE POLE: 222

222 Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:- 223

223 Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia. 224 Each Excess(+) Full Conversion INR INR Three Thousand One Hundred & Eighty Eight Only

224 Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- 225

225 SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement 226 Each Excess(+) Full Conversion INR

226 Supply and erection of AC Ceiling Fan 1200mm (48")-3star suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body 3Nos of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The product should be complete in all aspects with fan motor, bladeset down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. 227 Each Excess(+) Full Conversion INR INR Twenty Eight Thousand One Hundred & Sixty Only

227 Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as approved and desired by the Engineer-in-charge of site. 228 Each Excess(+) Full Conversion INR INR Nine Thousand Six Hundred & Ninety Two Only

228 Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %. complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 229 Each Excess(+) Full Conversion INR INR Nine Thousand Four Hundred & Twenty Four Only

229 Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %. complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 230 Each Excess(+) Full Conversion INR INR Twelve Thousand Nine Hundred & Ninety Two Only

230 Supply and erection of LED Street Light 45 watt (including LED driver) with pressure die cast aluminium housing with control gear ( IP 66 protection),THD< 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021. 231 Each Excess(+) Full Conversion INR INR Twelve Thousand &Twenty Eight Only

231 GALVANIZED STEEL OCTAGONAL POLES FOR WIND VELOCITY OF 169 Km/ HOUR: 232

232 Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-10025S-355J or ASTM-572A (GR-50)) and thickness of galvanization (70mm thick) conforming to IS:2629/ IS:2633/ IS:4759, BSEN-ISO-1461-1991 OR ASTM-A123/A123M-02. The pole shall be in single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The octagonal pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level as required:- 233

233 Galvanized Octagonal Pole Overall Length 9 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 155mm, Foundation size below G/L 600mm x 600mm x 1700mm, 4Nos. Foundation Bolts size 24mm dia., Length≥750mm with Base Plate Dimensions 275mm x 275mm x 16mm Thick 234 Each Excess(+) Full Conversion INR INR One Lakh Eight Hundred & Fifty One Only

234 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 235

235 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- 236

236 Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) 237 Mtr Excess(+) Full Conversion INR INR Thirty Three Thousand Four Hundred & Forty Eight Only

237 M.S. FLAT/ CHANNEL BRACKETS: 238

238 Supply and erection of M.S. Channel bracket made from 100mm x 50mm of length 600mm and height 600mm with M.S. angle iron 40mm x 40mm x 5mm for installing metal halide flood light fitting on it. Bracket should be fixed/ welded with the existing pipe of cover shed. The bracket should be painted with one coat of primer and two coats of approved paint. 239 Each Excess(+) Full Conversion INR INR Four Thousand &Nine Only

239 XLPE INSULATED UN-ARMOURED CABLES (LOOSE): 240

240 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- 241

241 Overall size 10sq.mm (2Core) Un-armoured (Loose) 242 P.Mtr Excess(+) Full Conversion INR INR Thirty Four Thousand Eight Hundred & Thirty Only

242 G.I. EARTHING: 243

243 Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- 244

244 GI Earth rod 20 mm dia., 3 mtr. Long 245 Each Excess(+) Full Conversion INR INR Three Thousand Eight Hundred & Twenty Four Only

245 Supply & Erection Of 200Watt LED Flood Light Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highlighting architectural features.complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 246 6 Each Excess(+) Full Conversion INR INR Fifty Eight Thousand Five Hundred & Forty Two Only

Total in Figures INR Forty Nine Lakh Forty Five Thousand Four Hundred & Fifty Nine Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Please Enable Macros to View BoQ information