SPECIAL REPAIR CUM ADDN/ALTN OF BLDG NO F-1 (OFFRS MD ACCN) AT AATS UNDER GE (EAST) AGRA

Amount

Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster from roof surfaces etc including cleaning ,brushing and watering to joints and grooves and throwing the debris away from MoD land from the roof of height upto 9 meter etc complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

Material and labour for applying 10 mm thick screed bed in CM 1:4 including water proofing compound @ 3% by weight of cement finished even and smooth on fair face of wall complete all as specified and directed.

M&L for preparation of new surface of roof incl cleaning the surface and applying Asian Paints smart care damp proof ultra, a fibre reinforced elastomeric liquid water proofing membrane with resilient polymer having sun reflectivity index (SRI) of 105, hence reducing the slab temperature by 5-10 centigrade. Forms a thick seamless, durable membrane thus offering ultimate waterproofing in three coats @ 9.5 Sqft/ lts. One coat of self priming of elastomeric waterproofing liquid (dilution with water in the ratio 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). Insert smart care roof tape on all the joints of parapet walls and horizontal slab. Operational should be complete in all respect as per direction of Engr-in-Charge. Note : (a) The work under item No 4 shall be carried out by the authorized applicator of manufacturer by using modern techniques. The contractor shall also furnish warranty of quality , finish work and effectiveness of water proofing treatment under this item for a period of not less than 10 years from the date of completion along with manufacturer warranty of material for the same period. (b) From the taking down, preparation of the surface, Engr-in-Charge shall approve each and every stage before applying finishing coat.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting and including water proofing compound @ 3% by weight of cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

Taking down cement or cement lime plaster of any description on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on other than fair face of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of acrylic distemper with roller application over a coat of primer over a coat of average 3mm thick wall care putty on new plastered surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coat of acrylic distemper with roller on old decorated wall surfaces over 3 mm thick white putty complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for applying two coats of white wash on wall including preparation of old plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick or concrete surface with water proofing compound @ 3% by weight of cement finished even and fair complete all as specified and directed. Note : Water proofing compound will be measured and paid separately under respective item of Sch ‘A’.

Supply only integral water proofing compound complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surface incl preparing surface plastered or unplastered on wall complete all as specified and directed.

M&L for applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. on wall and sanding of the putty surface with sand paper or other means by skilled labour and to make the surfaces smooth and free from dust etc. complete all as specified and directed.

Material and labour for Rendering 5 mm thick plastering in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

M&L preparing old surfaces of ceiling and applying two coat of white wash on ceiling surface complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 20 mm thick cement screed bed of CM (1:6) complete all as specified and directed.

All as per item No. 23.00 above but with 10 mm thick rendering in CM 1:4 as in Skirting complete all as specified and directed.

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

M&L Granite stone 20 mm thick as in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 20 mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and as directed.

Taking up or down 15mm bore steel/UPVC tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed.

S&F 15 mm dia GI tubing medium grade with all fittings laid/fixed in any trenches complete all as specified and directed.

Taking up or down 20mm bore steel/UPVC tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified and directed.

S&F in repairs 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair single piece EWC with UF seat cover hinges, fixing accessories set, cistern fittings, rim less tornado flushing of size 385x720x715 mm complete all as specified and directed.

S&F in repairs oval type wash basin superior quality 537x439 mm size incl fitted with granite top/baroda green stone over precast RCC slab including waste coupling and incl suitable size CP bottle trap connected upto grating complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore CP Angle valve fancy type with wall flane, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore CP Angle valve two way fancy type with wall flane, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore, single lever brass chromium plated wash basin mixer wothout popup waste with 450mm braided hoses opal prime fixed to wash hand basin complete all as specified and directed.

S&F in repair 15 mm bore, brass chromium plated single lever sink mixer swinging spout type for making hot & cold water screwed down for pipe and fixed to wall incl connecting legs and wall flanges dimension 12 x 10 x 5 cm and weight 450gm complete all as specified and directed.

S&F in repair 15 mm bore wall mixer brass chromium plated 3 in 1 with provn of both hand shower and over head shower with 115mm long bend pipe side connecting legs and wall flange weight 600gm and size 20x20x20 cm fixed complete all as specified and directed.

S&F 32/40 mm dia PVC waste pipe for wash basin /sinks complete all as specified and directed.

S&F in repairs 5mm thick glass beveled edge mirror fixing to wall with suitable assembly or bolts complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts, 600 mm long complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail 20 mm dia D type 600 mm long between flanges complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel, chromium plated or stainless steel with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.

S&F in repairs CP shower rose 125mm dia alongwith long bend shower arm of length 450mm complete all as specified and directed.

S&F in repair CP soap dish brass chromium plated, size 100 x 60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair 150 mm square/circular CP grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixed in repair 10 mm thick glass corner shelf set of 3 nos (size 200mm, 250mm & 300 mm) complete all as specified and directed.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified and directed.

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F Brass nipple 15 mm bore for RO water purifier complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F in repair plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, overall size 786mm X 914mm X 254mm and assembled with using brass nuts, bolts and washers complete all as specified and directed.

S&F in repair factory made 18mm thick 100% Solid WPC (Wood polymer Composite) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required frame as per site requirement. Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

S & F in repair Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304, gloss chrome, SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F Stainless Steel 304 grade wire Basket (avg. weight 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position complete all as specified and directed.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type Stainless steel brackets including CP knobs fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for issue under schedule of credit measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturb portion to match the existing complete all as specified and directed.

S & F CI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75 mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified and directed.

S & F CI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 100 mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified and directed.

S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.

M&L for Factory made WPC (Wood Polymer Composite) single Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed.

Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge (without sash bars) with plain, chamfered or rounded, mitred beads for glass etc, size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed.

S&F aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc complete all as specified and directed.

S&F for 200mm long brass tower bolt complete all as specified and directed.

S&F for 300mm long brass handle, oval type, stove enamelled complete all as specified and directed.

S&F for 200mm long brass handle, oval type, stove enamelled complete all as specified and directed.

S&F for 100mm long bright finished brass mortice latch and lock 6 levers with and pair of lever handles of approved quality with necessary screws, complete all as specified and directed.

S&F for 300mm long brass sliding door bolt complete all as specified and directed.

S&F for 150mm long brass floor door stopper complete all as specified and directed.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for 100 mm long stainless steel Butt hinges medium weight complete all as specified and directed.

S&F for 100mm long aluminium handle, cast type complete all as specified and directed.

S&F for 150mm long aluminium tower bolt complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, clamps, hold fasts, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

Supply and fixing factory made UPVC white colour sliding window three track size not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm), sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured or payment purpose).

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gas kit suitable for aluminum frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 5 mm thick figured glass, pin head type fixed with aluminum beading and gas kit suitable for aluminum frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for Boring holes through granite cooking platform lining for pipes etc n.exc 50mm dia and making good complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection (75 mm thick) laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand and finished even and smooth without using extra cement complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L preparation of old concrete surface and applying two coats of synthetic enamel paint on complete all as specified and directed.

M&L for Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds mitred/stopped ends etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed.

S&F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and including taking out existing unserviceable conduits or battens of any description with sunken boxes/junction boxes and all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia medium grade with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and suitable size of modular sunken box and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note : Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point/Exhaust fan point controlled by one switch.

(b) One 5 pin socket outlet 5 Amps on independent board complete all as specified and directed.

(c) One 5 pin socket outlet 5 Amps on same board complete all as specified and directed.

(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

(e) One telephone point wiring with cables 0.4 sq mm 2 core complete all as specified and directed.

(f) One TV socket point wiring with cables RG-6 Coaxial cable complete all as specified and directed.

All as per item No 115.00 here in before but with cable size 4 Sq mm FRLSH for one 5 pin 15/16 Amps socket out let on independent board and multi strand insulated copper earth continuity conductor of size 4 sqmm complete all as specified and directed.

Supply and fixing modular telephone jack RJ-11 white colour fixed in 1 M box comprising of flush metal box, inner plate and outer cover, all conforming to IS 3854:1997 with finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified and directed.

Supply and fixing modular TV coaxial socket outlet fixed in 1 M box comprising of flush metal box, inner plate and outer cover complete all as specified and directed.

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator heavy duty 120watts 240 volts complete all as specified and directed.

Supply and fixing Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fixing call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

S&F for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 1 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 6 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 2x6 (12) module for mounting switch and sockets complete all as specified and directed.

Supply and fixing blank spacer plate for single module complete all as specified and directed.

Supplying and fixing 20 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified and directed.

Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified and directed.

Supply and fix Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair post top lantern LED type 25 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver, lamp including grouting of GI pipe medium grade not less than 50mm and provide & fix suitable size of anti monkey cage in square shape made of 4mm GI wire of suitable size for protection of post top lantern from monkey complete all as specified and directed.

Supply & fixing LED security light compact & trendy of 35 watt with aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps of suitable size to be tightened with suitabe size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

Disconnecting & taking up or down existing unserviceable sub main wiring of copper/aluminium conductor of any description, any size & in any position including taking out existing unserviceable conduits or battens of any description and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

M&L for sub main wiring using 4 x 10 sqmm single core PVC insulated, unsheathed stranded copper conductor cable FRLSH of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of dia not less than 32 mm with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor FRLSH of size 10 Sqmm as earth continuity conductor connected to earth dolly complete all as specified and directed. (Note : Four run of single core PVC cable with one run of earth conductor and conduit /batten shall be measured as one unit.)

Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. TPN 415 volts 6 way with IP-43 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug top with one SP MCB 20 Amp 240 volt complete all as specified and directed.

Supply and fixing MCB SP 1 to 32 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing one way sheet metal enclosure suitable for MCCB, 4 pole, 160-200 Amps, As per IEC 61439-3 complete all as specified and directed.

Supply and fixing MCCB 4 pole, 160 Amps, 50 Hz, Icu=35 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified and directed.

Supply and fixing MCB TPN 100 Amps, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering, GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. Notes:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply, fixing and connecting in repair for Electric circuits for size of 1.0 sqmm copper FRLS wire for inverter in existing conduit/casing capping complete all as specified and directed.

Dismantling, taking down existing ceiling fan/Exhaust fan and deposited to E/M store and complete all as specified and directed.

Supply, fixing, connecting & testing Exhaust fan heavy duty, CI body single phase 230V, of size 300 mm sweep, 1400 rpm with louvered shutters including necessary fixing arrangements on wall with & including bracket nut and bolts and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Supply & Fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) operate with remote control and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose & Fan hook with hanging clamp suitable size of nut & bolts and also writing MES No with black paint complete all as specified and directed.

Supply and fix in replacement electric water heater, storage type steel body with S/S inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, 02 Nos connection pipes etc also writing MES No with black paint complete all as specified and directed.

S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as specified and directed.

Supply and fixing GI Tubes, 'Medium grade' 40mm dia complete to walls and ceilings for hanging of ceiling fan complete all as specified and directed.

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified Width : 60cm, Suction Power : 1298 m3/hr, Function Type : Auto clean, 6 way suction, Filter type: Baffle filter, Finish : Black Tampered Glass. Control: Gesture & 3 speed touch speed, Led : 2x1.5W LED, Warranty: 5 Years on product, 12 Years on motor, Product Dimension (WxDxH) (In mm) 600x425x595mm, complete all as specified and directed.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core, complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm as in soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all as specified and directed.

Supply and lay HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 40 mm including all fittings complete all as specified and directed.

M/s Krishna Construction Company (BID ID -3270069)

C P Singh and Co (BID ID -3274452)

m/s shanti consruction co (BID ID -3274234)

Captainkomalchaharconstructions (BID ID -3274026)

M/S RISHI RAJ AGRAWAL (BID ID -3271888)

M/S A A DRILL EXPERT (BID ID -3273661)

M/s United Engineers (BID ID -3274179)