General fund 24-25Repair and Maintenance work of 8th ward Community Hall in Vadamadurai Town Panchayat.

Amount

Community Hall

Dismantling and Clearing away of Floor tiles including cost of all charges etc complete

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part ofM. Sand ), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Clean removal of cement Plaster from walls including cost of all charges etc complete

Plastering with cement mortar 1:3 (One part of Cement and Three part of M Sand ( 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supplying and fixing Teak wood Door Panelled shutter with frame for door fully panelled with 25mm thick T.W. Planks ,the door Shutter Styles will be of 75mm X 40mm & Top rail will be of 100 X 40mm the Lock rail will be of 125mm X 40mm and the bottom rail will be 150mm X 40 mm and Frame size 100 X 100 MM and both sides should be finished with 4mm thick venner, including cost of furniture fittings and cost of wind appliances and labour charges for fixing furniture etc., and fixing up shutters in position and Best French (lac) polishing with 2 coats T.W. Doors,Windows, Ventilators, including cleaning the surfaces etc. complete complying with standard specifications.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of M.Sand ), 20mm thick and pointed with same colour of cement etc., complete as per standard specification

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2 x1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V Garede in Suitable PVC rigid pipe on wall and celling with PVC accessories with 150 x 100 x 113 mm TW switch box for 5A 3 pin non inter nlocking wall socket with 5A flush type switch with Painting on Suitable colour with Continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point ( SD 36)

Wiring with 2 x1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V Garede in Suitable PVC rigid pipe on wall and celling with PVC accessories and with TW switch box and 5A FT switch with painting of Suitable colour for open PVC Light point/ Fan Point (SD 17)

MURUGAN CONTRACTOR (BID ID -1181363)