Thiruppathur Town Panchayat - MP Fund - 2023-2024

Amount

Earthwork excavation for foundation to the full depth as may be directed by departmental officers in all types of soils except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth in the places shown by the departmental officers with initial lead of 10 Meters and initial lift 2 Metres and clearing and leveling the site etc. complete complying with standard specification.SS20B

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) For drain side wall

Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3)

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Plastering with C.M.1:5 (One part of cement and five part of sand) mix using 12 mm thick including cost and conveyance of all materials and labour charges ete., complete complying with standard specifications as directed by the departmental officers

Supplying & fabrication of steel of all RCC work including cost of steel binding wire & labour charge for fabrication & placing in position etc. complete.

Reinforced Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)

Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 83mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of M- Sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the M- Sand to paver block etc., complete ISI 15658-2006.

Drilling of 150mm dia borewells in allivual soil or sedimetary strata using rig by first drilling a pilot bore of 150mm dia direct rotary and circulation method using rig tools, fuel, labour drilling, benotonite mud and water required for drilling at the site shown by the departmental officer, drilling of 150mm dia pilot bore upto 30 m depth and below ground level.

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by departmental officer upto 60m below ground level

Supply and delivery of 150mm blue plain PVC casing pipe (165mm dia OD -CS) as per standard specification(Cost including Excise duty

Labour charges for inserting PVC casing with or without slots into drilled hole including welding the joints etc complete and supplying and packing the annular spaces with pebbles of size and quality as approved by departmental officers for 150mm dia casing and stacking for premeasurement etc.

Charges for developing the borewell with air compressor of 600 cfm capacity (Minimum 8 hours) including transportation and fuel charges for compressor as directed by the departmental officers and conducting yield test by 'V' notch method etc complete

Drilling of 150 mm bore well in Hard rock formation using rig including transportation and fuel charges of Rig to site and all labour charges etc complete

Supply and delivery of 1000 litres capacity HDPE tank of ISI mark including transportation charges to site and all labour charges etc complete(Asper TWAD Board Rate-2022-2023)

Supply and delivery of following materials as per ISI specification including cost and conveyance to site and all labour charges etc complete .(Asper TWAD Board Rate-2022-2023)

1.5H.P submersible motor 15 lpmX90m head Single Phase (IS 8034.(Asper TWAD Board Rate-2022-2023)

Panel board for 1.5HP submersible motor)

2.5 sq.mm PVC insulted copper flat cable(IS-690/1990)

MS Bore clamp set using MS flat 10 x 3 mm for 6" bore pipe

M.s Bore cover

40mm UPVC Pipe

Nylon Rope

Errection for labours charges up to 5 HP submersible motor and pump set etc., completed

Supplying and Fixing of Good quality EB box (Size 0.75mX0.45mX0.75m using 50x50x4mm M.S.angle and 16Gauge M.S.Sheet and 25X3mm M.S.Plate)including cost and conveyance to site and all labour charges etc complete

Supply and run of 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD standard data No.SD. 64).

Supply and run of 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) suitably bent at both ends with necessary angle iron upright and end supports for mains(PWD standard data No.SD. 69).

Supply and fixing of 16A DP Switch with metal clad of 500V with F&N (Side Handle) on suitable TW Board with earth connection only. (PWD standard data No.SD. 141).

S VAIRAMANI