REPAIR AND MAINTENANCE TO WOODEN AND STEEL JOINERY, REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS, ROOFING AND FALSE CEILING AND OTHER MISC WK IN SMQ AREA UNDER GE (AF) SRINAGAR.

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each, complete all as specified and as directed by Engineer-in-Charge

Taking down & Re-fixing shutters of any description in same opening, area exceeding 1 sqm and not exceeding 2.00 sqm each, after Resecuring or easing & adjusting complete all as specified and as directed by Engineer-in-Charge

Resecuring or easing & adjusting old wooden shutters of any description area exc. 1 Sqm and not exc. 2 Sqm each without taking down shutters, complete all as directed by Engr-in-charge.

M&L for Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

M&L for Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F 35 mm thick, second class hard wood plain, framed, panelled shutters (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S&F 35 mm thick, 2 nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metered beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat molded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F second class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, , complete all as specified and directed by Engineer-in-Charge.

S&F Plain, framed, paneled shutters (any number of panels), 30 mm thick with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; in second class hardwood, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 18 / 19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cup board shutters, shelves etc., including supply & fix teak wood lipping, 4 mm thick fixed with nails on edge complete all as specified and directed by Engineer-in-Charge.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open 30 mm, complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed by Engineer-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Butt hinges, medium weight, cold rolled mild steel 100 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 100 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium, anodised, barrel tower bolts 100 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 100mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium handles, cast type, anodised 100mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300 mm length, fixed with screw / welding complete all as specified and directed by Engineer-in-Charge.

S&F in repair Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length, fixed with screw / welding complete all as specified and directed by Engineer-in-Charge.

S&F Floor door stopper of aluminium alloy body, double legged with rubber shoe fixed to door, Overall length of cover plate 140 mm all as specified and directed by Engineer-in-Charge

S&F Box Type Steel windows with MS tubular frame, side hung shutters including hinges, tower bolt, handle and 100 mm long and steel peg stay, hold fast complete with glazing and gauged panel and guard bars, dovetailed or welded, complete all as specified & directed by Engr-in-Charge.

S&F Box type steel ventilators with bottom hung or top hung shutters with glazing / gauged panels with guard bars, including hinges, steel side arms or peg stays, hold fast and locking arrangements, complete all as specified & directed by Engr-in-Charge

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

S&F Figured glass 3 mm thick, pin head type and glazing with oil putty in squares in exc 0.5 Sqm in each pane, glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with wooden beading / oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, complete all as specified and directed by Engineer-in-Charge

S&F Figured glass 3mm thick, pin head type and glazing with wooden beading / oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for fixing of hold fast, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge

M&L for repairing steel windows by adjusting and welding the hinges, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs steel handles left / right for steel windows 150 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs steel stays 300 mm length for steel windows fixed with welding, complete all as specified and directed by Engineer-in-Charge.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat, concealed type lock for all three shutters, PVC roller etc all as specified below, including taking down old window complete all as specified and directed.

(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A

S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (section No 20036), half portion glazed with 4 mm thick frosted glass with rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass with aluminium louver patti including S.S wire gauge of 0.36 mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete. Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in Appx A

S&F Solar control film 25 micron thick reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

All as per Srl item no.54 above but except brick using serviceable bricks obtained from Srl item No. 53 here-in-before, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only integral water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for applying 2 mm thick cement base wall care putty on plastered surface of wall, and making the surface even & smooth for receiving distemper / paint of any description all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid separately

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old decorated surfaces of ceiling, by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying two coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified..

M&L 15 mm thick screed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendering / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

S&F 20 mm Stainless steel curtain rod with stainless steel bracket and stainless steel finials, fancy type as approved by GE, as in curtain rods including taking down the old curtains rods complete all as specified and directed by Engineer-In-Charge.

Dismantling wall and ceiling boards, fiber pulp insulation etc, including cover fillets & snap grid, complete all as specified and directed by Engr-in-Charge.

S&F false ceiling of Non asbestos fiber cement building designer boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed over and including mild steel galvanised powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1 mm thick in square pattern of grid size 600mm X 600mm . The GI Powder coated fram work will supported on side wall with the used of mild steel galvanised powder coated 'L' section of size 25 mm x 25 mm x 1 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including two coat of OBD complete all as specified directed by the Engineer-in-Charge.

S&F in repair Gypsum Board 12 mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions including necessary jointing and taping, and applying two coat oil bound distemper over one coat primer and 1 mm thick cement base putty complete all as specified and directed by Engr-in-Charge.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete. Note Fixing of wind tie will be measured & paid separately.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern complete all as specified and directed by Engineer-in-Charge

Taking down wooden roof trusses, coupled rafters or trussed beams above 4 mtrs and up to 8 mtrs, complete all as specified and as directed by Engineer-in-Charge.

Taking down wooden roof trusses, coupled rafters or trussed beams above 4 mtrs and up to 8 mtrs, for renewal of any defective members and reassembling, housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc. complete all as specified and as directed by Engineer-in-Charge. Note:- Timber renewed will be measured & paid separately.

M&L for second class hard wood clean sawn timber framed as in roof truss / purlins & similar work and hosted & fixed in position, complete all as specified and as directed by Engineer-in-Charge.

Dismantling Mild steel works of any description complete all as specified and directed by Engineer-in-Charge.

Dismantling framed steel trusses not exceeding 10 mtr span, complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and similar work conforming to Fe-410W Gde E-250 A, complete all as specified and directed by Engineer-in-Charge.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161, grade St.-240, complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel framed work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts and including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc, complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 89 above).

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 90 above).

M&L for Lagging to pipes 15 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Supply and fix in repair 1000 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms), complete all as specified and as directed by Engineer-in-Charge.

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25 mm bore (Minimum weight 455 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair PVC lids for water storage tank of any capacity, complete all as specified and directed by Engineer in Charge.

S&F in repairs bib taps, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down, with high pressure screwed for iron pipe & fixed 15 mm bore , all as specified and directed by engineer in charge.

S&F in repairs Angle valve, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down, with high pressure screwed for iron pipe & fixed 15 mm bore , all as specified and directed by engineer in charge.

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repair 15mm bore dia Gun-metal blobe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, , complete all as specified and directed by Engineer in Charge.

S&F in repair 20mm bore dia Gun-metal blobe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, , complete all as specified and directed by Engineer in Charge.

M/S A.R.TANTARY

M/S FAROOQ AND SONS

M/S Abdul Ahad Rather

M/S WANI AND SONS

NAJAR ENTERPRISES