REPAIRS REPLACEMENT OF INTERNAL PLUMBING SANITARY FITTINGS FLOORING JOINERY WORKS SUNKEN SLABS AND OTHER RELATED WORKS TO TYPE A B C N AND J MARRIED ACCN ALONG WITH SCOOTER CYCLE GARRAGES UNDER AGE B R II AT PHASE I CV RAMAN NAGAR UNDER GE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for; including reinforcement cut as required to facilitate demolition, complete all as specified and as directed.

Removing demolished concrete materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and tacking at the destination exc 5.0 km total distance up to10KM complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and disposing of debris outside MD land complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4 sq m each all as specified and as directed.

Taking down shutters of any description of area not exceeding 1 sq m, complete all as specified and as directed.

Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 Sq m each complete all as specified and as directed.

Uprooting, scrubbing out shrubs / plant / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying (No Suggestions) acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. (Note : The height of walls is up to 16 m, necessary cost of scaffolding shall deemed to be included in quoted rate.)

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.

Material and labour for Plain Cement Concrete (1:5:10) type E2, using 40 mm graded stone aggregate as in sunken slab filling, mass concrete etc, complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 125 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 105 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC Sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings

Supply and fix, 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.

Supply and fix 35 mm thick plain framed paneled factory made shutters (two panel) with II nd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix 25 mm thick, Factory made flush door shutters, 25 mm thick, solid core construction, with block board core panels and plywood face panels, commercial type on both sides, complete all as specified and as directed.

Supply and fix 18/19 mm thick one side pre-laminated particle board, interior grade, with decorative choice lamination on other side, fixed with screws, including providing 6 mm thick teak wood edging etc.,including taking down unserviceable boards as in shelves of cupboards, doors, etc., complete all as specified and as directed.

Supply and fix 18/19 mm thick plywood, Grade 2 quality, interior grade, commercial type, fixed in shutters / shelves, including taking down unserviceable boards as in shelves of cupboards, doors, etc., complete all as specified and as directed.

Re-securing or easing or adjusting wooden door shutters of any description, of area exceeding 1 sq m but not exceeding 2 sq m each, including making good the disturbed surfaces to match the existing, complete all as specified and as directed.

Repairs to steel window / ventilator shutters of (area not exceeding 0.50 Sq m) any description, including replacing handles, steel hinges of any pattern, peg stay etc., and making window / ventilator absolutely working condition, including necessary welding, complete all as specified and as directed.

Supply and fix in repairs, Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.

Supply and fix in repairs Continuous (piano) hinges, mild steel, bright finish or electro-galvanized, width of flap when opened shall be not less than 40 mm, complete all as specified and as directed.

Supply and fix in repairs, single action spring hinges, 100 mm size, mild steel with steel wire spring, stove enameled black fixed in repair including necessary welding to door frame complete all as specified and as directed.

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 100 mm long all as specified and as directed.

Supply and fix 100 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix, 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

Supply and fix in repairs , Floor door stopper, 140 mm length of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs Beads using 2nd Class hard wood, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store

Taking down tubular curtain rod, supply and fixing drapery rod, decorative type, made of 25 mm dia mild steel pipe powder coated (wall thickness not less than 0.63 mm), bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Note : Price shall not be less than 100/- per RM, Make : Aerolux / Vista / MEC)

Taking down brackets for curtain rod, supply and fixing brackets suitable for drapery rod of 25 mm dia, with wall thickness of 0.63 mm thick, bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Make : Aerolux / Vista / MEC)

Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Supply and fix, mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour, Rolled mild steel framed work such as in doors or gates of angle, or tee sections with gusset plates, rails, braces, etc. completely drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (exclusive of steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete Gde Fe 410 - W (Grade-E- 250) quality-A complete all as specified and as directed.

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame not exceeding 0.5 Sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame exceeding 0.5 Sq m each and not exceeding 3 sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Material and labour, 25 mm thick, Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in flooring, complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in paving / plinth protection, laid in panels, finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in sub base of flooring, etc., finishing the surfaces even and rough complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIa), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour,joint free non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-II a), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour,Joint free non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-II a), area of exceeding 0.18 sqm but not exceeding 0.38 sqm, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour, joint free Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colored tiles, laid over and including provision of backing coat of 10 mm thick in CM 1:3, complete all as specified and as directed.

Material and labour, joint free non-skid Ceramic coloured tiles 7 to 8 mm thick , area of exceeding 0.18 sqm but not exceeding 0.38 sqm,, as in skirting/dado, set and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick in CM 1:3, complete all as specified and as directed.

Material and labour, for Glazed ceramic coloured tiles, of size 300 x 450 x 7-8 mm thick as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick in CM 1:3, complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position complete all as specified and as directed.

Providing material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, complete all as specified and as directed.

Material and labour, for rendering 10 mm thick in Cement mortar 1:6, on brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour, for rendering 15 mm thick in patches on walls of brick / stone / concrete surfaces in two layers (base layer 10 mm and finishing layer of 5 mm thick in CM 1:4, including mixing water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : Supply only water proofing compound will be measured and paid for separately under respective item.

Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour, for rendering 10 mm thick in CM 1:4, including mixing with liquid water proofing compound on concrete surfaces of roof fascia, chajjas, fins, etc., and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : Supply only water proofing compound will be measured and paid for separately under respective item.

Material and labour for, rendering 15 mm thick in cement mortar 1:3 on concrete surfaces, finishing even and smooth including mixing with water proofing compound and applying 1 mm thick Brush Bond, RFX Grey of FOSROC or techno-commercially equivalent as per user’s manufacturer’s instructions, complete all as specified and as directed. Note:- Supply only water proofing compound will be measured and paid for separately under respective items.

Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new or previously untreated plastered ceiling surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV Resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.

Supply and fix Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq m in each pane all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparation of new wooden surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide pink primer complete all as specified and as directed.

Supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed incl taking down unserviceable GI tubing. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed incl taking down unserviceable GI tubing. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking up or down 15 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking up or down 20 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings fixed on walls/ceiling or laying in floors complete all as specified including Taking up or down 20 mm dia, GI tubing and .”

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings fixed on walls/ceiling or laying in floors complete all as specified including Taking up or down 20 mm dia, GI tubing and .”

S&F in repairs CPVC Brass Elbow for 16mm pipe all as specified and as directed

S&F in repairs CPVC Brass Elbow for 20mm pipe all as specified and as directed

S&F in repairs CPVC Brass Elbow (3/4 X ½) for 20mm pipe all as specified and as directed

S&F in repairs CPVC Brass Tee for 16mm pipe all as specified and as directed

S&F in repairs CPVC Brass Tee for 20mm pipe all as specified and as directed

S&F in repairs CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) for 16mm pipe all as specified and as directed

S&F in repairs CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) for 20mm pipe all as specified and as directed

S&F in repairs CPVC Female Brass Threaded Adaptor (FTA/ FBTA) for 16mm pipe all as specified and as directed

S&F in repairs CPVC Female Brass Threaded Adaptor (FTA/ FBTA for 20mm pipe all as specified and as directed

S&F in repairs CPVC union for 16mm pipe all as specified and as directed

S&F in repairs CPVC union for 20mm pipe all as specified and as directed

S&F in repairs CPVC tank adapter for 20mm pipe all as specified and as directed

Supply and fix in repairs, Chromium plated, Wall mixer with bend pipe for overhead shower, built-in non return valve with CP wall flanges, as per Cera Cat Part No QT F2006402 or techno and commercial equivalent in other makes complete all as specified and as directed.

Supply and fix Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. HT F3001151 of Cera or equivalent in other makes specified complete after taking down old bib taps all as specified and as directed.

Supply and fix two way, bib taps, fancy type, 15 mm dia, cast copper alloy, chromium plated, with CP flange, screwed for iron pipe or for brass ferrule, all as per Cat No.HT F3001163 of Cera or equivalent in other makes specified complete after taking down old bib taps all as specified and as directed.

Supply and fix in repairs, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 grams), suitable for 15 mm dia pipe, complete all as specified and as directed.

Supply and fix Pillar taps in repair, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F3002101 of Cera or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.

Supply and fix in repairs, Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), suitable for 15 mm dia pipe, complete all as specified and as directed.

Supply and fix in repairs, Stop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as per Cat No.HT F4050103 & HT F3001351 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed. MAKE:- Cat No. HT F3001201 of CERA or techno-commercially equivalent model in any one of the make as mentioned in list of makes here-in-after.

Supply and fix in repairs, PTMT angular stop cock, for 15 mm dia pipe, with flange, high pressure, screwed both ends, (minimum weight 90 grams), complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe including necessary cutting/threading the old pipe and provision of new fittings such as Tee, socket, elbow, union if required complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 95 mm with swivel joints, over head shower arm of 230 mm long with wall flange, complete all as specified and as directed. Make : Cera Cat Part No F7020305 & F7040103 or techno and commercial equivalent in other makes specified after taking down old shower rose complete all as specified and as directed.

Supply and fix in repairs, Swivel shower with 225 mm long shower arm of PTMT any colour (Minimum weight 40gms), suitable for 15 mm dia pipe, complete all as specified and as directed.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed. Make : CERA, Model No F5003103 or techno and commercial equivalent complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long Make : Jaquar, Cat Part No ACN-CHR-1171N or equivalent in other makes specified complete all as specified and as directed.

Supply and fix in repairs, Corner glass shelf(medium) 225mmx225mm with chromium plated bracket superior quality complete Make : Cera, Cat Part No F5005102 or techno and commercial equivalent in other makes specified, complete all as specified and as directed.

Supply and fix in repairs hand shower for Health faucet, 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), complete all as specified and as directed.

Supply and fix in repairs Health faucet gun complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe) Make : Cat Part No S1050101 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified complete all as specified and directed.

Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix in repairs, PVC long bend, and connecting to flushing cistern and IWC, complete all as specified and as directed.

Supply and fix in repairs, PVC short bend, and connecting to flushing cistern and EWC, complete all as specified and as directed.

Supply and fix in repairs, 32 mm dia, PVC waste pipe of length not less than 800 mm, complete all as specified and as directed.

Supply and fix in repairs, 40 mm dia, PVC waste pipe of length not less than 800 mm, complete all as specified and as directed.

Supply and fix in repairs, PVC waste coupling assembly of 32 mm dia suitable for wash hand basin, complete all as specified and as directed.

Supply and fix in repairs, CP waste coupling assembly of 32 mm dia suitable for wash hand basin, complete all as specified and as directed.

Supply and fix in repairs, 40mm CP waste coupling assembly, suitable for Kitchen sink, complete all as specified and as directed.

Supply and fix in repairs, Vitreous china snow white, wash hand basin (without pedestal) of size 550 mm x 400 mm all as per Cat No. No. S2040103 of Cera or techno and commercial equivalent makes specified including 32 mm dia PVC waste pipe of minimum 800 mm long with PTMT waste coupling 32 mm dia, all as specified and as directed.

Supply and fixing Stainless steel sink with draining board in repair, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and as directed.

Supply and fix new Stainless steel plate rack of size 600 mm x 750 mm and fixed with CP screws and PVC cleats including Taking down unserviceable plate rack, complete all as specified and as directed. Make: Blue star, Model No. SSKPR-311.or techno-commercially equivalent make of NIRALI / ANJALI / JAYNA / DIAMOND.

Supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position incl Dismantling of water tanks of 500 litres capacity from roof top and complete all as specified and as directed.

Supply & fixing polyethylene water tank cover with hinges and locking arrangement suitable for tanks up to 500 liters capacity, including taking down old water tank cover all as specified and as directed.

Supply and fix in repairs Ball valves of 20 mm dia , (minimum weight 210 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall including taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and as directed.

Same as above item No.129 but 75mm dia

Supply and fix in repairs, Chromium plated grating, 100 mm dia, including fixing with white cement complete all as specified and as directed.

Supply and fix PVC(SWR) floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement including dismantling of unserviceable floor trap, complete all as specified and as directed.

Supply and fix PVC(SWR) multi floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement including dismantling of unserviceable multi floor trap, complete all as specified and as directed.

Supply and fix in repairs, PVC (SWR) bends any radius 75 mm dia with access door, fixed in pipes, complete all as specified and as directed.

Same as item No 133 but 110mm dia

Supply and fix in repairs, PVC (SWR) branch piece single T equal or unequal 75mm dia with access door including taking down old branches all as specified and as directed.

Same as item No 136 but 110mm dia

PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia with access door including taking down old branches all as specified and as directed.

Same as item No 138 but 110mm dia

Supply and fix in repairs, UPVC (SWR) vent cowl of bore 110 mm dia, complete all as specified and as directed.

S&F in repairs, EWC seat covers white closed patter with recessed bottom, including screws and connections complete all as per Cera makes or equivalent in other makes, removing debris outside MD land, complete all as specified and as directed

Refixing Aluminum shutter including taking down of any dscription exc 1.00 Sqm n exc 2.50 sqm each after Easing and adjusting by opening all side members and refix with cleats and screw in true alignment including existing fitting/fixtures as in the same opening complete with Aluminum frame all as specifed & directed

S & F Magnetic door catches with sticking plate of standard size for cupboard doors approved by GE

S&F for Door Seal, Door Draft Stopper, Aluminium strip with Nylon Brush fixed to door bottom with screw all as specified and directed by Engr-in-Charge sample approved by GE

S & F teak wood beading of size 18/19 mm x 6 mm on the exposed/edges surfaces of the block board complete all as specified and as directed

S&F in repairs butt hinges 100mm, cold rolled medium weight mild steel all as specified.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished

S&F in repairs 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete

S&F in repair SS chromium plated, peg set of four/five fixed with screw complete all as specified and directed.

S&F in repair float valve for low level syphonic action type flusing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair Plastic Lever Handle for low level syphonic action type flusing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair grating round 125 mm size of PTMT (Minimum weight 40 gms) with single hole as , complete all as specified and directed.

S&F in repair bib taps long body, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair Spindal No 5 for CP bib tab/pillar tap etc complete all as specified and directed.

S&F in repair 3inch Spindal for conceled CP stop cock complete all as specified and directed.

S&F in repair 20mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.

SHANMUGA CONSTRUCTION (BID ID -3316959)

VARALAKSHMI CONSTRUCTIONS (BID ID -3332139)