Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID. | |
| 2 | L2₹18.1 L+₹18,789 (1.05%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID. | |
| 3 | L3₹18.6 L+₹72,199.15 (4.04%)Rejected-Finance 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L3 | Rejected-Finance DUE TO HIGHER BID. | |
| 4 | L4₹19.4 L+₹1.5 L (8.52%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID. | |
| 5 | L5₹20.4 L+₹2.6 L (14.3%)Rejected-Finance | L5 | Rejected-Finance DUE TO HIGHER BID. |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Ferozepur Cantt
GE (West) Ferozepur Cantt
Certain B R repair in Md JCOs OR qtrs in E AND F zone Satluj Enclave under AGE B R I OF GE (West) Ferozepur Cantt
2023_MES_605993_1
802023/GE-37/E8
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Ferozepur Cantt
₹50,000
Yes
19 Oct 2023
9 Aug 2023
7 Sept 2023
9 Aug 2023
5 Sept 2023
23 Aug 2023
Amount
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exceeding 2 sqm each and removing from site complete all as specified and directed.
Taking down Shutter of any description exceeding 2 sqm and refixing in same opening complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening complete all as specified and directed.
S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item no 7 above here-in-before but size 125mmx60mm with double rebate.
All as per ser item no 7 here-in-before but size 75mmx50mm with single rebate.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including making good disturbed surfaces of wall complete all as specified and directed.
S&F factory made 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.
S&F factory made 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified and directed.
M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.
S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 125mm extruded Aluminium alloy handle complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 250mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.
S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
S&F 3 mm thick ordinary quality sheet glass and glazing with oil putty and glazing clips fixed complete to wooden/steel window not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, in repair complete all as specified and directed.
S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/steel window not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L for cutting holes in brick wall exceeding half bricks but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
Dismantling wrought iron/mild steel work in any position complete all as specified and directed.
S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 (Gde-E-165) complete all as specified and directed.
M&L forming jambs etc built in cement mortor 1:6 to openings including cutting toothing and properly bonding into to old work also facing, jointoing and pointing to match to existing work complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repair complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010)complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.
M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wight not less than 150 gm/sqm) land on primed surface by forced apllication complete all as specified and directed.
M&L PCC 1:5:10, type E2 (using 40mm graded stone aggregate) in filling under sunken floor portion complete all as specified and directed.
M&L 30mm thick PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in floor finished even and rough to receive top layer complete all as specified and directed.
Supply only water proofing compound.
Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.
M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.
All as per ser item No. 45 here-in-before but using old bricks retrieved from demolition under item 44 here-in-before including cleaning and removal of mortar from old bricks.
Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.
M&L rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed.
M&L rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
Dismantling of floor hearth and wall tiling including mortar beding and throw rubbish out the premises complete all as specified and directed.
M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7 mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
S&F vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L glazed coloured ceramic tiles of size 300mmx200mm and 6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L glazed coloured designer ceramic tiles of size 450mmx350mm and 6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed.
M&L Granite 18mm-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L 16mm-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and directed.
M&L machine cut kota stone slab flooring 20mm-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.
M&L Kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in cement mortar 1:4 and jointed with d as per ser item no 62 here-in-before.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.
All as per ser item No. 66 here-in-before but 20mm dia.
Demolition of boarding of any description and in any position complete all as specified and directed.
Supply and fixing 2nd class hard wood 25 mm thick boarding clean sawn with butt joints fixed with nails in any situation, fixed in shelves, partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and smilar work complete all as specified and as directed.
S&F hasp and staple of Aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.
S&F Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified and directed.
S&F 100mm size, extruded Aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above GL) complete all as specified and directed.
M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling as mass concrete or in sub base of floors complete all as specified and directed.
M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed. Note : Sand cushioning will be measured and paid separately.
M&L fine sand bed under paver block, complete all specified and directed.
M&L 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floors finishes complete all as specified and directed.
M&L hardcore of broken bricks of guage exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B -1 all around the interlocking tiles to fix in position as in kerbs complete all as specified and directed.
S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe in repair complete all as specified and directed.
S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-90gms) and fixed in repair complete all as specified and directed.
S&F bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.
S&F 500 litre rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed.
S&F gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 210 gms) and fixed in repair complete all as specified and directed.
S&F mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.
S&F 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup in repair complete all as specified and directed.
S&F PVC connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.
S&F low density polyethylene (LDPE) pipes of pressure rating 6 kg/sqcm, 32mm bore as fixed complete all as specified and directed.
S&F 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified and directed.
S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified and directed.
S&F vitreous China white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.
S&F vitreous China white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.
S&F health faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook all as specfied and directed.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
S&F wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F vitreous China bowl urinal flat back, size of 465mmx355mmx265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.
S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38mm/40mm dia PVC waste pipe and including 38mm/40mm dia chromium plated waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.
S&F chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified and directed.
Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/sqcm) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.
M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @ 3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed. Note: WPC shall be measured and paid separately
S&F 50 micron thick polythene film, laid on a roof with side lap 150mm including preparation of roof surfaces complete all as specified and directed.
M&L 80mm thick average consolidated thickness mud phuska on flat roof including 25mm thick mud plaster complete all as specified and directed.
M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.
All as per ser item No 122 here-in-before but except tiles.
M&L covet fillet in plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) minimum radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including form work complete all as specified and directed.
S&F central hole basin mixer for wash hand basin including all fittings i.e including connection pipe as per manufaturers specification as in repair complete all as specified and directed.
S&F chromium plated fancy type wall mixer 2 in-1, connecting legs and wall flange complete all as per manufacturer's instruction as in repair complete all as specified and directed.
M&L welding in running for thickness of metal to be welded not exceeding 6mm, complete all as specified and directed.
M&L preparing new surfaces of wood and wood based surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing new surfaces of steel of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new plastered surfaces wall and applying two coats of oil bound distember over a coat of primer complete all as specified and directed.
M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.
M/S KRISHNA ENTERPRISES
M/S Manmohan Singh Contractor
Manjeet Singh Contractor
M/s Surjit Singh and bros
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .