Providing and laying 75 mm thick compacted bituminous macadam on damaged road portion and 30mm thick compacted SDBC on T3, T4, T5 Colony roads, Maal road, Workshop road, Kerb stones of Shahpurkandi Township

Amount

Providing and applying Tack Coat @ 0.40kg per sqm: Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications

Providing and laying bituminous macadam 75mm thick with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid Over a reviously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications complete in all respects

Providing and laying semi dense bituminous concrete 3Omm thick with batch type HMP using crushed aggregates of specified grading. premixed with bituminous binder VG-30 @ 5%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per IRC-111 (2009) specifications Complete in all respect.

Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications

Supplying and fixing of single mould twin shank reflective road studs made out of poly arbonate/ABS moulded body and reflective panels with micro prismnatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall Conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body The marker shall Support a load of 13635 Kg tested in accordance with ASTM 909 kgf D4280. The marker shall withstand flexural strength force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to 2 years warranty for ASTM D788. The supplier shall provide satisfactory field performance as per clause 804.7.3 of ORT&H 5th revision specifications

Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications

Dismantling concrete Lime Concrete, cement concrete of 1:612 or leaner mix

Kassi work undressed involving an average horizontal throw up to 20 metres and an average vertical lift up to 0.5 metres including breaking of clods.

Cement concrete 1:4:8 mixing by mechanical means using Concrete mixer volumetric type

V.S. Saini (BID ID -637809)

KOHINOOR CONSTRUCTION CO (BID ID -639384)