L047-RD Road to Sindhagada road_Road_RCC Slab Culvert -1x3.0x1.50- and Protection wall _At 0.735 km

Earth work in excavation in foundation in hard soilincluding hard moorum, stony earth mixed with boulders except sheet rock & boulders requiring blasting with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, Cess and T and P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.

Providing and filling Foundation and Plinth with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, royality, of all materials and cost of alllabour and T and P as required for the item of work including Cess etc complete as per specification and direction of Engineer-in-charge.

Providing Cement Concrete with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering and levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, labour of all materials and including hire and running charges of machineries T and P required for the work including supplying and working of pumps and Cess as per the specifiction and direction of Engineer-in- charge.OPEN fOUNDATION

Plain Cement Concrete M15 nominal mix in levelling course below open foundation of Head walls as per drawings and Technical Specification Clause 802,803,1109,1202,1203 of MoRD

InSubstructure

Plain Cement Concrete M20 nominal mix in levelling course below open foundation of Head walls as per drawings and Technical Specification Clause 802,803,1109,1202,1203 of MoRD

Providing Concrete for reinforced cement concrete of M25 in Superstructure complete as per drawing and technical specifications Clauses 802,803,1202 and 1203 of MORD and asper direction of Engineer-in charge

Providing and supplying of HYSD bars confirming toapproved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification and jointing if neCessary by lapping and tying the grills and placing in position as required for RCC works as per the approved design placing the grills in position including cost and conveyance of tor steel and binding wires of 18 to 20 guage including Cess etc complete as per the specifiction and direction of Engineer-in- charge

Providing weep hole in brick masonry/ plain/ reinforcement concrete abutment/ wing wall/ return wall with 100mm dia AC pipe extending through the full width of the structure with slope 1(V) to 20 (H) towards drawing face including all cost, conveyance , all labour T and P sundries etc complete in all respect as per specification and direction of the E.I.C

Construction of guide posts of 250mm dia M 15 grade cast in situ with 20mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 as per direction of Engineer in charge.