REPAIR / MAINTENANCE OF CEILING FANS AND GEYSERS IN ZONE-I AREA UNDER GE JAIPUR

Amount

Rewinding the motor of table / pedestal / cabin fan 400 mm of all types and make with super enamelled copper wire of existing gauge and approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of exhaust fan 375/450 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of wall mount air circulator fan of size 400 to 600 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete.

Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.

Renewal of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.

Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required.

M&L for painting of table / pedestal / cabin fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc

M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No in a height of minimum 30 mm with black paint as required .

M&L for scraping completely fresh air / exhaust fan of any sweep and make and providing with two or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade over a coat of red oxide primer and polishing with rubbing compound and wax polish.

Transportation of ceiling fan / exhaust fan from store to site or site to store as required

M&L for Installing, testing and commissioning repaired ceiling fans at any location in cantonment Jaipur including connection complete.

Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.

Renewal of PVC canopy suitable for ceiling fan of any size and make as required.

Renewal of down rod of ceiling fan made of MS pipe 15 mm bore including cutting, threading, painting etc as 30 cm to 60 Cm required.

M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete.

Renewal of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required.

Taking down carefully storage type water heater (geyser) any make and capacity from clamp/bolts including disconnecting water and electric connection including checking defects and re fixing the same and connecting up after cleaning of geyser and repair complete. (Note - Repair work shall be measured separately).

Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25/ 50 litre capacity geysers of any type as required.

Supply only thermostat ISI marked suitable for 25/50 litres geysers as required.

Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.

Supply only stainless steel inner tank suitable for 50 litre capacity geysers housing complete.

Repair of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete.

Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.

Supply only dis cut out switch suitable for 25 litre capacity geysers ( make of geyser MARC) complete.

Supply only capillary thermostat set suitable for 25 litre capacity geysers ( make of geyser MARC) complete.

Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.

M&L for painting of geyser 25/50 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete.

Renewal of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete.

Supply and fixing in replacement hot water tank made out of 2.5mm thick MS sheet duly welded with seamless welding, water leak proof with all accessories such as inlet water connection, outlet water connection, normal water connection, overflow water connection etc including fixing PUF insulation 32 mm thick capacit 200 ltr all as required.

Supply and fixing in replacement hot water tank made out of 2.5mm thick MS sheet duly welded with seamless welding, water leak proof with all accessories such as inlet water connection, outlet water connection, normal water connection, overflow water connection etc including fixing PUF insulation 32 mm thick capacit 300 ltr all as required.

S&F in replacement hot water pipe duly insulated with glass wool and aluminium cladding 15mm bore.

Servicing of solar collector panel of capacity 200/ 300 ltrs, cleaning the entire panel thoroughly after opening it, minor repair like nuts, bolts, washer, clamps etc as required and testing.

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete.

Supply and fix in replacement PVC fresh air fan 200 mm sweep with louvers, fan motor and accessories complete including making connections.

Supply and fix in replacement PVC fresh air fan 250 mm sweep with louvers, fan motor and accessories complete including making connections.

Supply and fix in replacement PVC fresh air fan 300 mm sweep with louvers, fan motor and accessories complete including making connections.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x 4.0 Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x 6.0 Sqmm + 1x6.0 Sqmm earth wire in 20mm dia conduit.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x 10.0 Sqmm + 1x10.0 Sqmm earth wire in 25mm dia conduit.

S & F 20 amps single pole and neutral socket outlet with 2 pole and earty metal enclosed plug top in poweder coated CRCA steel ssheet enclosre recess mounted with chained matel cover for socket out let with and incl one no single pole MCB 20 Amps.

Schedule of Credit

Anshu electrical and works

SHREE BHAGWATI ENTERPRISES

M/S Sheeba Enterprises

M/S JALANDRA CONSTRUCTIONS

S.R.Enterprises

J.J.ENGINEERING