UPGRADATION AND IMPROVEMENT TO HYGIENIC CONDITION OF KITCHEN, BATH AND TOILET OF MARRIED ACCOMMODATION C-1 TO C-10 (40 QTRS) AT DRDO TOWNSHIP, KANCHANBAGH, HYDERABAD

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster up to the height 7.0 M includng disposal of rubbish to the dumping ground within 50 metres lead as per direction of Engr -in- Charge

Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 meter leads as per direction of Engr -in- Charge

M&L Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor 2nd floor level in all shapes and sizes in cement mortar 1:4 complete as per direction of Engr -in- Charge

Providing Half brick masonry with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in super structure above plinth level upto floor 2nd floor level in cement mortar 1:4 as per direction of Engr -in- Charge

M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete .

Distempring Two or more coats on new work over a coat wall primer with Ist quality acrylic distemper , having VOC ( Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture of required shade and colour incluidngapplying 1mm thick wall care putty complete as per manufacturer's specification

Distempering on old work ( wall/ ceiling) ( one or more coats) with 1st quality acrylic distember ( Ready mix ) having VOC content less than 50 grams/ litre of approved brand over a coat of water thinnable cement primer and manufacturer to give an even shade as per direction of Engr -in- Charge

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. Exposed on wall ,This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. and Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and laying rectified Glazed Ceramic non skid floor tiles of size 300x300mm or any size, more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments,as per direction of Engr -in- Charge

Providing and fixing Ist quality ceramic glazed wall tiles of size 450x300mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade.

Providing and laying vitrified tiles 10mm thick, size 600 x 600mm in floor in different size with water absorption less than 0.08 % and conforming to IS : 15622 of approved brand & manufacturer, in all colours and shade , laid on 20mm thick screed bed of cement mortar 1:4/chemical jointing with grey cement slurry @ 3.3 kg/Sqm incluidng grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, hacking out the surface, levelling system and rubber mallet for placing the tiles gently and easily.

Providing and laying vitrified tiles 10mm thick, in different sizes ( size of tiles 600 x 600 mm) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & shade , in skirting, riser of steps , over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments, Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge etc., complete

Providing and laying Polished Granite stone flooring kitchen platform in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, 15 mm nominal bore including taking down old fiting.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter including taking down old fiting

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, 15 mm nominal bore including taking down old fiting as per direction of Engr -in- Charge

Providing and fixing uplasticised PVC connection 15mm nominal bore x 60 cm length pipe with PTMT nuts, collar and bush of approved and colour including taking down old fiting as per direction of Engr -in- Charge

Providing and fixing 75mm dia sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm complete incluindg cost of cutting and making good the walls and floors, as per direction of Engr -in- Charge

Resecuring the shutters of any description of area exc 1sqm and n exc 2sqm each after carrying out necessary repair complete all as per direction of Engr -in- Charge

M/S PAVANI ENTERPRISES (BID ID -3123382)

vvcenterprises (BID ID -3123747)

Ravi Enterprises (BID ID -3123875)

Venkat Sai Enterprises (BID ID -3123966)

SUN LIGHT HOUSE (BID ID -3122820)

SRI SAI ENTERPRISES (BID ID -3123286)

sri vishnu enterprises (BID ID -3124168)