REPAIRS TO BOUNDARY / COMPOUND WALL, FENCING, BOUNDARY PILLARS AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Demolition of brick /stone masonary built in cemnt mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed.

Demolition of cement concrete (un reinforcement) in ground floors and pavings n.exc 15cm thick (below or above GL) including disposal off demolished materials & rubbish off of the premises all as specified.

Demolition of cement concrete (reinforced) of any description of any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) as in coping/ benching to roof including disposal off demolished materials & rubbish out of the premises all as specified.

M&L for brick work with old size flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 using old size bricks complete all as directed by EIC.

All as per item No 4 above but except bricks.

M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

M & L for walling of random rubble, uncoursed well bonded, and solidly hearted, built in cement morter 1:6 complete all as directed by EIC.

All as per item No 7 above but except stone.

M&L for cement concrete as in lintels Beam upto 1.5m span, 1:2:4 type B-1 (using 20mm graded aggregate) as in coping including necessary form work complete all as directed by EIC.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in lintels above 1.5m span beams bressumers, including glass coping complete all as directed by EIC.

Form work to sides at soffits of floor/roof beams, lentals for rough finished surfaces completed all as directed by EIC.

Taking down cement plaster on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

M&L for rendering 5 mm thick over 10mm in CM 1:4 on the external surfaces of brick work/Strone or concrete surface finishing fair and even without using extra cement including mixing of integral WPC( WPC will be measured and paid separately.)

M&L for rendering 10 mm thick in CM 1:6 on fair faces of the brick masonry surfaces and finished even and smooth without using extra cement complete all as directed by EIC.

M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in flooring finished the surface even and smooth with using extra cement complete all as directed by EIC.

S&F glass dividing strips 3mm thick and width of strip is 38mm complete all as directed by EIC.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base for pavings etc all as directed.

M&L for factory made chequered cement concrete tiles 300x300/400x400x20 to 25 mm thick in floors over 15mm thick cement screed bed in 1:6 set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as directed by EIC.

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed

Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil.

M&L PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in foundation for post holes.

M&L for reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts straining or terminal posts, struts etc for fencing averge sectional area exc 100 and n exc 250 sq cm with or without chamfered angles and flat, splayed rounded or mitered tops as directed and fixed.

S&F in repair galvanised 2 strand, steel barbed wire 2.2 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing and straining and fixing as directed by EIC.

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S & F steel work in such posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;etc., and similar work conforming to Fe-290 Gde E-165 rails, braces hold fast etc and similar work confirming to Fe 290 Gde-E-165

M&L for Plain cement concrete 1:4:8 type D-2 (using 20 mm graded stone aggregate) as in surface channel/drain finished even and smooth with using extra cement including necessary form work complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed by EIC.

Ditto as per itme No. 27.00 but 6mm to 8mm dia bar for striupps.

M&L for precast cement concrete louvers,jallies in PCC (1:2:4) type B0 (12.5 graded stone agg), 45mm thick (measured solid) set in CM 1:6 including all moulding etc and taking down old jally complete all as specified and directed by EIC.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed

M&L for granite (of any type)work (table rubbed and polished) 18 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Dismantling floor, hearth or wall tiling (glazed, non-skid, chequred, interlocking etc.) including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish of the premises.

S&F fully body/heavy duty 16mm thick vitrified tiles polished area of each tiles n exc 0.36 sqm in floors/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade over 15mm thick cement screed bed in 1:6 set.

M & L for preparation of new plaster surface of wall and applying 2 coat of cement base paint over a coat of primer.

M&L for preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by EIC.

M & L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome.

Extra for forming faire finished Drain channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as directed by EIC.

M&L for fixing broken glass coping on top of wall set in cement morter 1:3 complete all as directed by EIC.

Dismantling of fencing of any type

Supply only chain link fencing MS galvanished including line wires any mesh size &type standareds rail, stratighting bolts etc including providing of binding wire exceuding 4 kg/ sqm

Fixing chain link fencing MS galvanished including line wires any mesh size &type standareds rail, stratighting bolts etc including providing of binding wire exceuding 4 kg/ sqm

M & L for granite or trap Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush all as specified and directed by Engr-In-Charge

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but n. exc.15 cm long dia of neck in mm 16 mm to 20 mm.

M&L for preparation of newly plastered surface of wall and applying two coats of Acrylic weather proof exterior paint over water based primer complete all as specified and directed.

M & L for Hard core broken stone or boulders of gauge n exc 63 mm depossted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface .

M&L for preparing new or previously untreated surfaces of Brick,Stone work,Concerte of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by EIC.

M&L for preparing old surfaces of Brick,Stone work,Concerte of any description not otherwise described exc 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by EIC.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 46,046.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/s. JBSR ENTERPRISES.

M/S K. K. Construction

Alpha Construction

Anand Trading Co

Srujan Associates

SVT ENGINEERS AND CONTRACTOR.

Abhiraj Enterprises

Bidder Name

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

Alpha Construction

Anand Trading Co

Vinod Enterprises

M/s. JBSR ENTERPRISES.

Srujan Associates

Abhiraj Enterprises