Construction of Valmiki Bhavan at Corporation Layout in Ward No. 53 In Kalaburagi city.2024-25 SFC UNTIED (TSP) EST COST. 20.40 LAKHS

Construction of Valmiki Bhavan at Corporation Layout in Ward No. 53 In Kalaburagi city.

Earth work in surface excavation by mechanical

means for lowering & leveling the ground for all

works other than foundation in all kinds of soils &

upto depth not exceeding 300mm as per drawing

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

FLOORING BED CONCRETE

PCC BELOW UCRS MASNORY UCRS OUTER PRIMETER OF BUILDING PPC BED BELOW EXERNAL SIDE ONLY

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

CHAJJA ON ABOVE ALL WINDOWS

Providing centering shuttering formwork scaffolding ect finished rate of concrete work of building CENTERING WORKS FOOTING FOR RCC

centring to colum appendix i corrigendum-3 additionalities for forwaork centering and scaffolding page no-2 kpwd sl no 8 volumn-1 dsr 2023-24 columns r qty sub structure

columns rcc qty super structure sub structure

centring to plinth beam providing centering hutting formwork scaffolding etc finished rate of concrete work is of building plinth beam total concrete quantity v-1 pg no: 15 item no: 2.2.1

centring beam and chajja to linter providing centering hutting formwork scaffolding etc finished rate of concrete work is of building plinth beam total concrete quantity v-1 pg no: 15 item no: 2.2.1

centring to roof beam providing centering hutting formwork scaffolding etc finished rate of concrete work is of building plinth beam total concrete quantity v-1 pg no: 15 item no: 2.2.1

centring to roof slab providing centering hutting formwork scaffolding etc finished rate of concrete work is of building plinth beam total concrete quantity v-1 pg no: 15 item no: 2.2.1

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) PG NO: 9 ITEM NO: 5.4 KPWD VOLUMN-2 2023-24

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

9 Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

9 Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and sid...

CLAMPMS (SL NO 541)

Providing and fixing in position fully panelled Mathi/Nandi wood shutters

for doors with stiles and rails of 40mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per dra...

DOOR FIXTURES LOACKING ARRANGEMENTS WITH HANDELS (IT 12.60 105)

HINGES 5'' HEAVY DUTY (ITE 12.74.1)

BRASS HANDELS 150 MM (ITEMS- 12.79.107)

TOWER BOLT 250 MM LONG (ITEM 12.76.1)

DOOR CATHER /9IT 12.64, 105)

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic

(FRP) panelled door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade unsatura...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi

chambered UPVC(Matching to RAL-9016) sections and with minimum

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

11.34A Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed t...

11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved steel...

11.3 Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with...

9.12 Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades...

9.35 Flooring with 25mm thick polished shahabad slabs using cement mortar

1:6, 25mm thick over existing cement concrete bed or top of roof laid to

line and level and jointed with cement slurry mixed w...

9.35 Flooring with 25mm thick polished shahabad slabs using cement mortar

1:6, 25mm thick over existing cement concrete bed or top of roof laid to

line and level and jointed with cement slurry mixed w...

9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to

IS : 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bott...

9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using gla...

8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners

wherever required smooth rendering, providing and ...

8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate

primer of approved brand and manufacture on steel galvanised iron/

steel works including preparing the surface after thorougly cl...

8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to gi...

8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 g/L and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required...

8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 g/L and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required...

8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 g/L and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required...

2.11 Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, lapi...