GE863/EWS-T-57 OF 2022-23

Amount

Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

Demolition of stone slabs and tiles of any description Or Thickness in floor aprons etc. laid bedded and pointed in any mortor complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite complete all as specified and directed.

M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material & labour for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection, finishing fair and even without using extra cement complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

Dismantling framed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and directed.

Dismantling framed timber scantlings under 40 Sq. cm in section and in any position complete all as specified and directed.

M&L for 2nd class hard wood in scantling timber framed work fixed clean sawn complete all as specified and directed.

S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought, bull nosed splayed chamfered or rounded on one edge or face sectional area xceeding 3 and not exceeding 6 Sq. cm complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coat of cresote complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for providing precast cement concrete block masonry exc. 10cm width Type C1 1:3:6 using 20mm graded stone aggregate and set in cement mortar 1:6 complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed.

M & L for rendering 15mm thick on stone walling in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed.

M&L for 9mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face fixed with screw for timber framed work complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavation in trenches not exc 1.5 mitre wide and n.exc 1.5 mitre in depth for foundations etc, or shafts, wells, cseepit, manhole, pier holes, etc not exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement mixed with water proofing compound @ 3% by weight of cement or as per manufacture's instructions complete all as specified and directed. Note: WPC shall be measured & paid seperatly as 'Supply only' under respective item.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork In cement concrete 1:2:4, type B-0 , using water proofing compound as per manufacture's instructions complete all as specified and directed. Note: WPC shall be measured & paid seperatly as 'Supply only' under respective item.

M&L Reinforced cement concrete M-25 design mix (using 20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M &L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.38sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match color of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for 6 mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work as in partitions / shutters, ceiling etc complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion on surface of walls complete all as specified and directed.

S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified and directed.

S & F 35 mm thick factory made, second class hard wood, kiln seasoned and chemically treated Plain framed, panelled shutter (two panel) with lock rail and panel of 10 mm thick bison panel complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks including form work complete all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in ends of posts, back of chowkhats etc. area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each complete all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in small articles such as stop, covers, gully gratings, holdfasts, ende of posts, back of chowkats, etc. area tarred not exc. 0.10 Sqm each complete all as specified and directed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane. complete all as specified and directed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square exc 0.5 sqm in each pane. complete all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned stacks, or galvanised wire staples complete all as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

S & F in repair 20 mm dia aluminium alloy anodised curtain rails with bracket complete all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M&L for removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc including making good to the disturbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed.

All as per Srl item No 59 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm .

All as per Srl item No 59 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm .

All as per Srl item No 59 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed .

S&F lamp holder, PVC/ Polycarbonate type with back plate suitable of batten fittings complete all as specified and directed.

Supply and fixing in replacement surface & wall mounted LED 20W tube light fitting batten 4 feet, made of high quality material and design. Extruded aluminum housing enhanced safety, high quality PC diffuser, reliable and robust housing structured, maximize the endurance over the life time slim integrated desiged, with lumen out put of 125 lumen/ watt, alongwith accessories complete all as specified and directed. Make: Crompton Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent of Makes in Appx 'B' as approved.

Supply and fixing in replacement of SKYLUX recess mounted 2 x 2 Luminaire , white powder coated CRCA housing with LEDs of capacity 36 watt, Seamless front frame with white coloured flat acrylic cover, Luminaire type WH complete all as specified and directed. Make: BAJAJ Cat No. BZRSQL 36W GZ1 WH or equivalent of Makes in Appx 'B' as approved.

Supply and fixing in replacement surface/ Wall mounted LED 10 W Bulkhead fitting, with IP65 protection, energy saving, all as specified and directed. Make: Crompton Cat No. LBHP-10-CDL or equivalent of Makes in Appx 'B' as approved.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed..

Supply and fixing in replacement of MCBs, SPN, 40 Amps, 10 KA, 'B' curve, 230V, complete all as specified and directed..

Supply and fixing in replacement of MCBs, SP, 6-30 Amps 10KA, 'B' curve, 230V, complete all as specified and directed.

Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm dia suspension wire, one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed.

Material & labour in repair earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below ground level at any type of strata) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. Connected with galvanised iron earth wire 4mm dia by means of bolts, nuts hook nuts and washers as earth lead including concrete chamber of PCC 1:3:6 type C1 (using 20mm graded stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mmx300mm, 15mm thick plaster in CM 1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size in (1:2:4) Type B1 (using 20mm graded stone aggregate ) reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1 (2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm bore dia light grade GI pipe for protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire, including testing on completion complete all as specified and directed. Note : (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.

Supply and fixing 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed. Make: Crompton Cat No. LED9WDFINV4CDL or equivalent in Havells LHLDEGEDML8O009 or Wipro Cat No.NE9001

Supply & Fixing bulk head light with 10 W LED Lamp complete all as specified and directed. Make: Bajaj Cat No BIBWP 10W LED or equivalent of Wipro / crompton / Philips as approved

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed.

S&F in Replacement recessed mount LED 7 Watts downlight with in built driver, injection moulded housing and made of high translucent frosted optically efficent for anti-glare and smooth light distribution, complete all as specified and directed. make -crompto Cat NO LDRDLJ7-WWor equivelent in havells or wipro as approved.

Note:- The total shall subject to adjustment of credit of Rs 22,574.00 for old Materials as per Schedule of Credit.