CONSTRUCTION OF DEVLOPMENT OF BERASIYA BUS STAND ARIF NAGAR WARD 16 ZONE 04

Amount

CONSTRUCTION OF BERASIYA BUS STAND AT ARIF NAGAR NEAR TRANSFER STATION WARD NO 16 ZONE NO 04

SUPPLYING TESTING INSTALLATION AND COMMISSIONING OF DISTRIBUTION TRANSFORMERS 200 KVA BIS CERTIFIED EE LEVEL-III

Anti Climbing Devices

11 KV Pin Insulator (Polymer)

11 KV Disc Insulator (Polymer)

11 KV Strain Hardware fitting

11 KV D.O. Fuse Unit

11 KV A.B. Switch 400 Amp Polymer Type

11 KV L.A. Polymer Type

HT Bio Metallic Clamp

LT Bio Metallic Clamp

Jointing Sleeves suitable for 100 Sqmm Al.EqAAAC Conductor

XLPE 1 core unarmoured 70 Sqmm

XLPE 1 core unarmoured 150 Sqmm

Fencing of substation DTR Substation fencing (37 Feet) of 6 feet with MS angle 50x50x6 mm 7 No. 7 feet HIGHT

supply and laying of 40 mm nominal size BT METAL

supplying and fixing of 16 swg ms sheet box wheather dust and vermin proof for istallation of streetlight energy meter of suitable pattern as per MPSEB requirement duly painted with 2 coats of red oxide and 2 coats of synthetic enameled paint. The box to have a two chambers one for fixing energy meter and kitkat of soze 60x60x20cms and other for fixing of rewirable metal clad switch fuse unit,time switch,contractor etc. of size 40x40x20 cms. Both the chambers should have lockable himged doors. The meter chamber door should have opening for taking meter readings from outside and duly fixed with glass or wire mesh. The box to be fitted on existing pole in an approved manner with required clamps and should consist of following accessories : For 3 phase power supply a) 1 No. 63A 500volts TPN rewirable metal clad switch fuse units. b) 3 No. 63 Amps 500 Volts porcelin rewirable cutout. c) 1 No. Time switch for 24 Hour operation d) 1 No. 3 phase AC3 rating 70 Amp power contactor. Complete with internal wiring,din rail,terminal strip and other materials as required

Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. 90Watt, color temp 3000-6500k as required.

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. 9 meter height, 155 X 70mm A/F, 250x250x16mm base plate, 4 nos. X 24 x 750mm bolt

Providing and fixing of sword canopy type DOUBLE arm GI bracket upto 2 meter Long for 70mm A/F top octagonal pole

Providing and fixing of sword canopy type single arm GI bracket upto 2 meter Long for 70mm A/F top octagonal pole

Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 guage MS sheet with clamping arrangements,locakable hinged dppr duly painted on all sides with red oxide after antirust and corrosion tratment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings: (A) For 200 KVA and 100KVA Transformer a) 315 Amps 35 KA breaking capacity TP MCCB with neutral link for incoming-1 No. b) 4 strip aluminium bus bar 400 Amps supported on epoxy insulators - 1 set c)160/200 Amps, 415 Volts DMC cutout with base for outgoing feeder with 160/200 Amp HRC - 9 No.s d) G.I. Earth Terminals - 2 Nos.e) 6 Leaver Godrej Padlock with 3keys - 1 No. f) Light point with switch and lamp holder with lamp- 1 No.

RECESSED LIGHT 36 WATT COOL WHITE Recessed cool white mounting low depth aesthetically designed LED 2x2 & 4x1 flat panels to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination.

Suspended circular LED lulminaire that combines beautiful designs with required illumination level suitable for office general lighting & break-out areas. BSTAP 30 watt White

LED Tube light aluminium body 18/20 watt

Recessed Light 15 watt Cool Whmte Sleek square ovessed mounting LED dowm light with AlL die- |cast boadv. finish with drop down diffiuser to deliver low glare illumination with optimizai heat sink for efficient heat dissipatiom

Surface mounted round LED downlight with AL die-cast body, finish with drop down Pcdiffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation. 12 watt White

LED BULB Supply of 18 watt LED Bulb with 2 years warrantee

supply, intallation, testing and commissioning of 3x240 volt, 40-200 Amp Static Trivector energy meter thread threw of class 1.0 accuracy confirming to IS 13779/IEC62053 - 21, CBIB - 88 along with GSP (GPRS Enabled) modem duly fitted meter box with suitable external entina

double gate (2 Nos - 2.5 feet x 5 feet) set of MS angle 25x25x4 mm with mesh and locking

esigning and construction of footing foundation for octagonal pole of desired size including excavation in soil/soft rock, base concrete M-7.5 (1:4:8), 15mm thick and pedestal of RCC M-20 (1:1.5:3), required tar steel reinforcement for required size from base concrete, shuttering, curing etc. with existing foundation bolts complete as per specifications in an approved manner as per manufacturer drawing or engineer-in- charge.

manhole in cement mortar 1:4 (1 cement : 4 fine sand) common Brunt Clay Brick or fly ash bricks, of compressive strength not Clay Brick or fly ash bricks, of compressive strength not less than 75 Kgf/ Cm2 RCC top slab Cement Concrete 1:2:4 (National Mix) with stone aggregate 20mm nominal size, 20 cm thick foundation in cement concrete 1:3:6 (Nomical Mix) with stone aggregate 40mm nomical size, inside & outside plastering minimum 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with a floting coat of neat cement and making channels in cement concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, Including providing and fixing footrest, manhole cover and frame etc. complete. (only excavation as per actual shall be paid separately), Depth of manhole shall be considered as the vertical distance from top of the manhole cover to the outgoing invert of main drain channel. (for reference purpose use Drawing No.11) 17.2.1 man hole with above specifications having inside size 90X80 cm and 45 cm deep including c.i. cover with frame (light duty) 450X600 mm clear opening as per is:1726:1991

for Berasiya Bus stand as per given design by Architect

Bidder Name

Amount

SHREE KRISHNA INFRASTRUCTURE(GSTN-23AELPA9944A1ZT)

M/S SAHITA CONSTRUCTION COMPANY(GSTN-23AAQFS2422J1Z5)

KHIALDAS CONSTRUCTIONS(GSTN-23AAQFK5110P1Z2)

M/S SAHITA CONSTRUCTION COMPANY

SHREE KRISHNA INFRASTRUCTURE

SHREE KRISHNA INFRASTRUCTURE

M/S SAHITA CONSTRUCTION COMPANY