REPAIR/MAINTENANCE OF PUMP SETS, VALVES, CLEANING OF SERVICE TANKS, OVERHEAD TANKS/ UG SUMPS AND EXTERNAL WATER SUPPLY AT NAVAL AREA UNDER GE HADDO, PORT BLAIR

Amount

Disconnecting of the suction/delivery lines of the centrifugal monoblock pumpset including pulley, coupling connected to the motor and removing the pumpset from its location, opening up, carrying out complete overhauling of the pumpset and replacing defective/worn out parts, packing kit, greasing, re-assembling, placing back the pumpset in its original location and connecting back of suction/delivery lines, coupling, pulley, re-alignment and testing complete all as specified and as directed for the following capacities of pumpsets: NOTES: (i) Spares like bronze impeller, bearing, bush, bronze casing ring, gland plate of stuffing box shall be measured and paid separately under relevant items of this BOQ as SUPPLY ONLY. (ii) Old material obtained from replacement shall be contractor's property as per Schedule of credit given in tender.

15 HP MAKE: KIRLOSKAR

10 HP MAKE: KIRLOSKAR

7.5 HP MAKE: KIRLOSKAR

5 HP MAKE: KIRLOSKAR

3 HP MAKE: KIRLOSKAR

2 HP MAKE: KIRLOSKAR

Disconnecting/ dismantling 3 phase, 440 volts, 50 cycles electrical motor from the monoblock pumpset (electrically and mechanically) from its location and shifting to work shop, opening the motor end cover, taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding of motor with appropriate gauge, weight and turns of super enamelled copper winding wire using proper Garware insulating paper, insulating with Class I varnish, and oven drying for requisite insulation values, reassembling the motor completely and bringing back to its original location, cleaning the impeller of pump, supply & replace gland rope, greasing, replacement of unserviceable spares of pump, fixing back in position, connecting back electrically and mechanically with proper alignment and testing complete all as specified and as directed for the following capacities of pump sets: NOTES: (i) Insulation of winding shall be Class 'B' upto 7.5 HP and Class 'F' for 10 HP and above. (ii) Spares like bronze impeller, bearing, bush, bronze casing ring, gland plate shall be measured and paid separately under relevant items of this BOQ as SUPPLY ONLY. (ii) Old material obtained from replacement shall be contractor's property as per Schedule of credit given in tender.

15 HP MAKE: KIRLOSKAR

10 HP MAKE: KIRLOSKAR

7.5 HP MAKE: KIRLOSKAR

5 HP MAKE: KIRLOSKAR

3 HP MAKE: KIRLOSKAR

2 HP MAKE: KIRLOSKAR

1 HP MAKE: KIRLOSKAR

SUPPLY ONLY bearing double jet suitable for for the following capacities of pump and motor as per OEM:- MAKE: SKF/TATA/NBC

SUPPLY ONLY bushing suitable for the following capacities of pump and motor as per OEM:- MAKE: SKF/TATA/NBC

SUPPLY ONLY gland plate stuffing box including MS coupling with key suitable for the following capacities of pump and motor as per OEM:- MAKE: KIRLOSKAR

SUPPLY ONLY bronze impeller suitable for the following capacities of pump and motor as per OEM:- MAKE: KIRLOSKAR

SUPPLY ONLY bronze casing ring suitable for the following capacities of pump and motor as per OEM:- MAKE: KIRLOSKAR

M&L for cleaning of PVC/RCC water storage service tanks, situated at any location viz., over top of buildings/stagings of any height, disconnecting the inlet and outlet coupling/union connections, removing and placing the top covers aside, flushing out the muddy water, cleaning the inside of tanks by scraping/scrubbing with wire brushes, scrubbers and brooms for removing fungus/scale formations and finally cleaning with bleaching powder and fresh water to make inside of tank fresh and clean, cleaning the outside and base of tank including platform with water, removing clogs if any inside inlet and outlets, connecting back inlet and outlet by replacing new couplings/unions if found unserviceable and checking for leakages if any, placing the top covers back in position, writing the details such as capacity of tank, date of cleaning, due date for cleaning etc., with letter size 10cm in height using white colour synthetic enamel paint over a black background of size 60 x 40 cm in DD/MM/YYYY format for the following capacities of service tanks: NOTE: The cost of ladders/scaffolds/ropes and other T&P required, if any shall be deemed to be included in the unit rate quoted

300 Litres

500 Litres

750 Litres

1000 Litres

2000 Litres

5000 Litres

10000 Litres

20000 Litres

M&L for cleaning of UG sumps/Semi UG sumps/ OH tanks at any height, situated at any location by closing the inlet supply valves, removing and placing the top inspection cover aside, flushing out the muddy water using diesel driven non-clogging pumpset from sumps and drain out the muddy water from OH tanks by gravity, cleaning the inside of sumps/ OH tanks by scraping/scrubbing with wire brushes, scrubbers and brooms for removing fungus/scale formations and finally cleaning with bleaching powder and fresh water to make inside of tank fresh and clean, cleaning the outside exposed area of tank with water, removing clogs if any inside inlet and outlets, applying one coat of white wash inside the sumps/tanks, opening the inlet valves and checking for leakages if any, placing the top inspection cover back in position, writing the details such as capacity of tank, date of cleaning, due date for cleaning etc., with letter size 20cm in height using white colour synthetic enamel paint over a black background of size 100 x 60 cm in DD/MM/YYYY format for the following capacities of UG sumps/Semi UG sumps/ OH tanks: NOTE: The cost of ladders/scaffolds/ropes and other T&P required, if any shall be deemed to be included in the unit rate quoted

UG sump of 50000 Gallons capacity at Vijay Baugh pump house

UG sump of 20000 Gallons capacity at Vijay Baugh pump house

UG sump of 10000 Gallons capacity at Vijay Baugh pump house

Semi UG sump of 50000 Gallons capacity at Jarawa pump house

Ground sump of 7000 Gallons capacity at Navy park pump house

OH tank of 2500 Gallons capacity at Navy park pump house

OH tank of 2500 Gallons capacity at 3.6 MW power house

OH tank of 2500 Gallons capacity at INS Jarawa

OH tank of 10000 Gallons capacity at 3.6 MW power house

OH tank of 25000 Gallons capacity at at Vijay Baugh pump house

OH tank of 15000 Gallons capacity at Vijay Baugh pump house

S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old unserviceable tank with fixtures complete all as specified and as directed for the following capacities of tanks: MAKE: SINTEX/POLYCON/INFRA/ROTEX NOTE: The cost of ladders/scaffolds/ropes and other T&P required, if any shall be deemed to be included in the unit rate quoted.

300 Litres

500 Litres

750 Litres

1000 Litres

2000 Litres

S&F PVC water tank cover to existing PVC water tank and secure with hinges, fixed at any location including taking down old unserviceable cover complete all as specified and as directed for the following capacities of tanks: MAKE: SINTEX/POLYCON/INFRA/ROTEX

Upto 300 Litres

500 Litres to 2000 Litres

5000 Litres to 10000 Litres

S&F 40mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 690 grams) screwed for iron pipe with necessary GI fittings such as elbows, nipples etc., including taking down old unserviceable one complete all as specified and as directed. MAKE: PRAYAG/POLYTUFF or equivalent

S&F 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455 grams) screwed for iron pipe with necessary GI fittings such as elbows, nipples etc., including taking down old unserviceable one complete all as specified and as directed. MAKE: PRAYAG/POLYTUFF or equivalent

S&F 20mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 210 grams) screwed for iron pipe with necessary GI fittings such as elbows, nipples etc., including taking down old unserviceable one complete all as specified and as directed. MAKE: PRAYAG/POLYTUFF or equivalent

S&F 100mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

S&F 80mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

S&F 50mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

S&F 40mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

S&F 25mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

S&F 20mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed. MAKE: ZOLOTO/LEADER/NETA/LAKSHMI

M&L for 100mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

M&L for 80mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

M&L for 50mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

M&L for 40mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

M&L for 25mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

M&L for 20mm dia or bore galvanised steel tubing, medium grade, with all fittings and laid in trenches or fixed to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed. MAKE: TATA/ZENITH/JINDAL/BANSAL

SUPPLY ONLY 50mm dia or bore PVC braided hose pipe as replacement to old unserviceable pipe complete all as specified and as directed. MAKE: PREMIER/GODAVARI/NANDI/VIJAY

Supply, install, test & commissioning of In-line high pressure pump with stainless steel impeller, staging 2, single phase, 220 Volts, 0.6 HP/ 370 Watts, head range 28 to 10.5 metres, discharge range 15 to 87 LPM, size of suction and delivery lines 25mm bore including taking down old unserviceable one complete all as specified and directed . MAKE: KIRLOSKAR Cat part No. CPBS 52424H or equivalent in TEXMO/ TARO/ CROMPTON GREAVES

S&F Direct On-line (DOL) starter in sheet steel enclosure, type MN 25 DOL, AC-3 Duty, 415 Volts, 50 Hz, 3-Phase starter upto 15 HP (11 KW) capacity, relay range 14 to 23 Amps, including taking down old unserviceable one complete all as specified and directed . MAKE: L&T Cat part No. SS94352 or equivalent in BCH/ SIEMENS/ C&S

S&F Fully Automatic Star Delta (FASD) starter in sheet steel enclosure, type MN 25 FASD, AC-3 Duty, 415 Volts, 50 Hz, 3-Phase starter upto 30 HP (22.5 KW) capacity, relay range 14 to 23 Amps including taking down old unserviceable one complete all as specified and directed . MAKE: L&T Cat part No. SS94364 or equivalent in BCH/ SIEMENS/ C&S

S&F cast iron sluice valve, 80mm size or bore, class PN 1.6, ISI marked, heavy duty with brass spindle, operating wheel, flanged on both ends along with suitable new rubber packing (gasket), bolts, nuts & washers and necessary modifications if required for fixing in location including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F cast iron sluice valve, 100mm size or bore, class PN 1.6, ISI marked, heavy duty with brass spindle, operating wheel, flanged on both ends along with suitable new rubber packing (gasket), bolts, nuts & washers and necessary modifications if required for fixing in location including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F cast iron sluice valve, 150mm size or bore, class PN 1.6, ISI marked, heavy duty with brass spindle, operating wheel, flanged on both ends along with suitable new rubber packing (gasket), bolts, nuts & washers and necessary modifications if required for fixing in location including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F foot valve, brass, 100 mm bore, screwed and threaded, with strainer and jointing with the existing suction pipe line including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F foot valve, brass, 80 mm bore, screwed and threaded, with strainer and jointing with the existing suction pipe line including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F foot valve, brass, 50 mm bore, screwed and threaded, with strainer and jointing with the existing suction pipe line including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

S&F non-return valve, brass, 50 mm bore, both ends flanged including neoprene rubber gasket, bolts, nuts and washers, fixed to existing pipe line including taking down old unserviceable sluice valve of any description complete all as specified and as directed. MAKE: KIRLOSKAR/UPADHYAY/VENUS/DURGA/KESORAM/BIR/HAZRA

Supply, laying, testing and commissioning DI (ductile iron) pipes 100mm dia, Class K-7, spigot and socketed ends with internal cement mortar lining and external zinc coating (minimum 130 Grams/Sqm) and bitumen finishing layer (minimum 70 micron thickness), conforming to IS- 8329:2000 (Amended No. 1) in any length alongwith jointing materials such as rubber tyton joints, , laid in same trench after and including taking out old unserviceable CI/DI water pipes with fittings and recovering lead joints by burning complete all as specified and as directed. MAKE: ELECTRO STEEL CASTINGS/ TISCO/ KESORAM / JINDAL/RASHMI NOTE: (i) DI specials will be measured and paid separately under relevant items of this BOQ. (ii) Excavation & earth work will be measured and paid separately under relevant items of this BOQ.

Supply, laying, testing and commissioning DI (ductile iron) pipes 150mm dia, Class K-7, spigot and socketed ends with internal cement mortar lining and external zinc coating (minimum 130 Grams/Sqm) and bitumen finishing layer (minimum 70 micron thickness), conforming to IS- 8329:2000 (Amended No. 1) in any length alongwith jointing materials such as rubber tyton joints, , laid in same trench after and including taking out old unserviceable CI/DI water pipes with fittings and recovering lead joints by burning complete all as specified and as directed. MAKE: ELECTRO STEEL CASTINGS/ TISCO/ KESORAM / JINDAL/RASHMI NOTE: (i) DI specials will be measured and paid separately under relevant items of this BOQ. (ii) Excavation & earth work will be measured and paid separately under relevant items of this BOQ.

M&L for Cast iron fittings (specials) such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing of double socket etc), Tee pieces, single branch, Y-junction, double branch, tail piece, cross (all sockets or spigot and socketed ends), collars, caps and plugs up to 150mm dia or bore of pipe complete all as specified and as directed. MAKE: ELECTRO STEEL CASTINGS/ TISCO/ KESORAM / JINDAL/RASHMI

M&L for run lead joints for existing CI/DI spigot and socket pipes and fittings 150mm dia or bore using new run lead and spun yarn including removing old leaking run lead joints and retrieving old lead complete all as specified and as directed.

M&L for run lead joints for existing CI/DI spigot and socket pipes and fittings 100mm dia or bore using new run lead and spun yarn including removing old leaking run lead joints and retrieving old lead complete all as specified and as directed.

M&L for run lead joints for existing CI/DI spigot and socket pipes and fittings 80mm dia or bore using new run lead and spun yarn including removing old leaking run lead joints and retrieving old lead complete all as specified and as directed.

M&L for tyton (rubber ring) joints (ISI marked) for existing CI/DI spigot and socket pipes and fittings, 150mm dia or bore including removing old joints complete all as specified and as directed. MAKE: SBR (IS-5382))

M&L for tyton (rubber ring) joints (ISI marked) for existing CI/DI spigot and socket pipes and fittings, 100mm dia or bore including removing old joints complete all as specified and as directed. MAKE: SBR (IS-5382))

SUPPLY ONLY Ferric Alum for sedimentation of suspended matter in water, conforming to IS complete all as specified and as directed.

SUPPLY ONLY O-Tolodine solution bottle, 500ml capacity for testing of chlorine complete all as specified and as directed.

SUPPLY ONLY Ef-Chlor sodium dichloroisocyanurate (NaDCC) water disinfection and purification granules, packed in plastic jars of 1 Kg net weight complete all as specified and as directed. MAKE: HIND PHARMA BHOPAL or equivalent make as approved

SUPPLY ONLY Aquafit Chlorine 65% to 70% (Calcium based granular disinfectant for water treatment, more stable than chloring gas and stronger than bleaching powder and sodium hypochlorite) in sealed 45 Kg drums net weight complete all as specified and as directed. MAKE: SREE RAYALASEEMA HI STRENGTH HYPO LIMITED or equivalent make as approved

S&F Electric shock treatment chart printed on AO size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50mm width with 3mm sheet glass and 6mm plywood backing and suitable hanging arrangement to wall with hooks/steel chain etc., including taking down old unserviceable one complete all as specified and as directed.

S&F First aid chart printed on AO size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50mm width with 3mm sheet glass and 6mm plywood backing and suitable hanging arrangement to wall with hooks/steel chain etc., including taking down old unserviceable one complete all as specified and as directed.

S&F Chlorine test kit, digital type including taking down old unserviceable one complete all as specified and as directed.

M&L for carrying out repairs to valve chamber of size not exceeding 900x900x900mm (Internal dimensions), taking out loose chamber cover and keeping aside for re-fixing, removing vegetation, small plants inside and outside of chamber, taking out plaster from internal and external wall surfaces by hacking, making good damaged/broken wall surfaces using PCC (1:3:6) solid blocks in CM(1:4), rendering 10mm thick in CM(1:4) for internal and external surfaces of masonry walls finished even and smooth without using extra cement, fixing of removed chamber cover firmly into the walls using cement mortar grouting and finished alround neatly, applying two coats of white wash on newly plastered surfaces internally and externally and applying a coat of synthetic enamel paint over a coat of red oxide zinc chrome primer all over to chamber cover complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation of poles, stays, struts or for laying cables/pipes etc., not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each as in soils complete all as specified and as directed.

Removing excavated material (soils) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

BHARAT MULTITECH INDUSTRIES PVT LTD

CHANDER SEKER ENTERPRISE

ANITA VARMA ENTERPRISES

Gulmarg Electrical Service

S K ENTERPRISES

RS ENGINEERING WORK