REPAIR/ MAINT OF DRAINS, FENCING, RETAINING WALL and OTHER MISC WORK AT MIL STN KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Material and labour for PCC (1:4:8 ) type- D2 (using 40mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed.

Material and labour for brick work with subclass ‘B` old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and as directed.

Material and labour for stone masonary walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed stone masonry,well bonded, bedded and solidly hearted, built in cement mortar 1:4 but except stone complete all as specified and as directed. Note- The serviceable stones obtained from Serial item No - 4.00 will be used after removing motar, cleaning with water, etc.)

Material and labour for raised pointing to random or polygonal rubble uncoursed or brought upto courses in Cement mortar 1.4 complete all as specified and as directed.

Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately.

Supply and fixing PVC SWR pipes 75 mm dia in any length with rubber ring joints laid in trenches or wheep holes complete all as specified and directed.

Dismantling structural steel work including doors , gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, angle iron chowkats for door ,barred iron doors, ladders framed balusters, walk ways, railings, and similar work conforming to Fe-290-Gde E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

Material and labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.

Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed.

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete with and including rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement and including all as specified and directed

Material and labour for two coat of cement base paint over new plastered surface including preparation of surface complete all as specified and directed

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Supply and fixed mild steel, rolled sections(channel, angle or tee sections) fixed independently cut to ordinary length as in post or struts in fencing,ladder etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc conforming to Fe-290.Gde-E-165, complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc,complete all as specified.

Dismantling of chain link fencing/ barbed wire fencing of any description complete all as specified and directed.

Supply only chain link MS galvanised fancing any mesh size and type, complete all as specified and directed by Engineer-in-Charge.

Supply only PVC coated chain link fencing made of galvanised steel with a mesh size 4 inches (100mm), a wire diameter 5mm (before coating) with a PVC thickness 3mm complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply and fixing Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed each line wire to measured) including taking down old GI barbed wire fencing complete all as specified and directed

Material and labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia conforming to Fe-410.Gde-E-250, complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc,complete all as specified.

Supply and fixing chequered cement concrete tiles with grey cement and mix with pigment in floors, etc, of size 300 mm x 300 mm x 22-25 mm thick, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20 mm thick (average thickness) cement screed (1:4) base, complete all as specified.

Material and Labour for Machine pressed precast cement concrete with grey cement and pigment, rubber moulded, interlocking designer paver blocks, in any and shape, confirming to IS-15658-2006 of 80mm thickness, M-40 grade in path, hard standing, etc. laid over and including 50 mm thick bedding layer of sand complete, all as specified and as directed.

Material & labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) 100 mm thick as in sub base to flooring and finishing surface fair and even complete all as specified.

Dismantling of stone slabs and PCC tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar and removing the rubbish outside of MoD land, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for providing pre-cast cement concrete louvers and jallies, 40mm thick, 1:2:4, type B-0 (using 12.5mm graded mechanically crushed aggregates) including all mouldings but excluding frame, set in cement mortar (1:4), complete all as specified and directed.

Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing in replacement 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290-Gde E-165, complete all as specified and as directed.

Amount of credit of Rs. 138225.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Sagar Builders (BID ID -3447833)

Varindera And Varindera Construction (BID ID -3447676)

R B TRADERS (BID ID -3447406)