REPAIR REPLACEMENT OF FITTING FIXTURES OF HOSP BLDG, ADC CTVS CENTRE AT AHRR UNDER GE EM RR HOSPITAL, DELHI CANTT 10

Amount

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed.

M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including PVC conduit 20 mm dia or higher, complete with all conduit accessories, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing for One light/fan/bell/exhaust fan point controlled by one switch complete all as specified and directed. Note - All accessories likes modular top cover plate / hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per item No 2 here-in-before but One 3 Pin socket outlet 5 Amps on Independent board.

All as per item No 2 here-in-before but One 3 Pin socket outlet 5 Amps on same board.

All as per item No 2 here-in-before but One light point controlled by two, two way switch

All as per item No. 2 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in existing conduit, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing for One light/fan/bell/exhaust fan point controlled by one switch complete all as specified and directed . Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per item No 7 here-in-before but One 3 Pin socket outlet 5 Amps on Independent board.

All as per item No 7 here-in-before but One 3 Pin socket outlet 5 Amps on same board.

All as per item No 7 here-in-before but One light point controlled by two, two way switch

All as per item No. 7 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

S & F Modular Switch 20 Amp, 2 Module with red indication, single pole one way, ISI marked complete all as specified

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed

S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed.

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed.

S & F Modular Switch 2 way 6 / 10 A, 1 Module complete all as specified and directed.

S & F Modular fan regulator step type, 120W 2 Module complete all as specified and directed.

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.

S & F of Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, 240 Volts, complete all as specified and directed.

Supply and fix modular AC box single pole and neutral with a top pin and earth plug and socket complete with one Single pole MCB 25 Amp, 240 Volts.

S & F in repair wall mounted, decorative ultra slim polycarbonate, Tube Light, LED fitting with high lumen output, environmental friendly, energy efficient, 25 watt, 6500K, heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified.

S & F in repair wall mounted, decorative ultra slim polycarbonate Tube Light, LED fitting with high lumen output, environmental friendly, energy efficient, 36 watt, 6500K, heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified.

S & F in repair wall mounted, decorative ultra slim polycarbonate Tube Light, LED fitting with high lumen output, environmental friendly, energy efficient, 20 watt, 6500K, able to change colour from warm white to natural white to cool white with a toggle switch, heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified.

S & F in repair wall mounted, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, 10 watt, 6500K, Mirror Light, heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified.

S & F in replacement of ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling 2' x2' Panel, Glare free and opal diffuser of 36 watt (CW) including fixing accessories likes strip clips etc, (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement of ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling 2' x2' Panel, VisionLED for cleanroom of 42 watt (CW) including fixing accessories, (CCT- 5700K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement recessed mounted LED round light fitting 12 watt, slim, compact, aluminium die cast edge lit panel, round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement recessed mounted LED Square light fitting 15 watt, slim, compact, aluminium die cast edge lit panel, round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement Surface mounted LED Round light fitting 18 watt, round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement Surface mounted LED Square light fitting 18 watt, round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement Surface mounted LED Round light fitting 12 watt, PC housing, ultra bright compact panel with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips (CCT- 6500K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S&F in replacement Surface Spotlight with aluminum structure, with adjustable light engine to achieve the desired illumination angle of 7 watt, with high efficient LEDs and glare free including fixing accessories (CCT- 3000K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

S & F in replacement Decorative wall light made up of high grade engineering plastic material suitable for 9 W LED lamp B22 base including fixing accessories complete all as specified and directed.

Supply and fix in replacement comfort bed light fitting for patient bed for Hospitals in extruded aluminium housing with PMMA diffuser having system Wattage of 31 Watts (CCT-5700) having three lights and having personalised bidirectional up & down light for pleasant and smoothing light experience including 03 Nos switches for each light complete all as specified.

Supply and fix in replacement of energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP65 Motion Sensor LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed.

Supply and fix in replacement Building security light 18 / 20 W, Motion Sensor Street Light, energy efficient, should stays on as long as motion is detected, then dims to 20% if no movement is detected for 90 seconds, inbuilt Microwave sensor, suitable for indoors / outdoors with high efficient high power LED enclosed with toughened glass and Voltage rated 220V to 240V etc complete all as specified and directed.

Supply and fix in repair PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.50 sqmm size complete all as specified and directed

Supply and fix in repair PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.75 sqmm size complete all as specified and directed

Supply and fix in repair PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 1.00 sqmm size complete all as specified and directed

Supply and fix in repair PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 2.50 sqmm size complete all as specified and directed

Supply and fix in repair PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 4.00 sqmm size complete all as specified and directed

Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall/ floor or roof etc and applying putty complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit 20 mm dia or higher, medium grade complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified. Note : 1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit. 2. Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit 20 mm dia or higher, medium grade complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit. 2. Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.

Vijeta Solutions (BID ID -3074554)

GLIBS CONSTRUCTION (BID ID -3073925)

RUCHIKA ENGG.WORKS (BID ID -3074211)

ACR ENTERPRISES (BID ID -3073686)

P S TRADERS (BID ID -3074915)

SANJEEV ENTERPRISES (BID ID -3086226)